Home
- ▶
- Heaters/Source
- ▶
- Agilent Heaters and SensorsMass Spectrometry, Scientific Supplies & ManufacturingScientific Instrument Services 5973 Source Heater Tamper Resistant Allen Wrench 5973/5975 Quad Sensor 5985 Source Heater Assembly Agilent Interface Heater Assembly 5971 Interface Heater
MS Filaments Manufactured by SIS (39) 4198SIS is the world's leading supplier of mass spectrometer parts and supplies.
SIS MS Filament and Heater Repair (6) 3300Mass Spectrometer filaments and heaters can be repaired and restored to a like-new condition at S.I.S.
VG Filaments (6) 3178VG and Vestec Mass Spec filaments by SIS
Thermo MS Filaments (5) 2727Replacement filaments for your Thermo mass spectrometer
Vestec Filament 2698VG and Vestec Mass Spec filaments by SIS - ribbon design.
Agilent MS Filaments (4) 2560Replacement filaments for your Agilent/HP mass spectrometer
Shimadzu MS Filaments (4) 2545Replacement filaments for your Shimadzu mass spectrometer
Mass Spectrometer Filament Repair and Manufacture 2504Repairs of Filaments and Heaters - listing of filaments repaired by SIS along with pictures of all the filaments
Waters MS Filaments (4) 2500Replacement filaments for your Waters mass spectrometer
VG MD800 Filament 2307VG Mass Spec MD800 filament by SIS.
Shimadzu QP2010 Filament 2288Direct replacement for the Shimadzu QP2010 filament (225-10340-91).
Agilent 5989 Filaments 2273Filaments for your Agilent 5989 mass spectrometer.
Waters/VG Autospec Filament 2273VG and Vestec Mass Spec filaments by SIS - ribbon design.
Perkin Elmer MS Filaments (2) 2236SIS manufactures PE Filaments.
VG Platform Filament 2236SIS VG Platform Filament- Shimadzu QP5000 Filament 2234Direct replacement for the Shimadzu QP5000 filament (225-01072-00).
Thermo TRACE™ Filament 2223Buy replacement filaments for mass spectrometers here. Thermo TRACE Filament, part number VGF5, The VG MD800 filament is for the Thermo/VG TRACE MS
Ametek/Dycor RGA Filament 2168Direct replacement filament for the Ametek/Dycor RGA leak detector and quadrupole instruments- Shimadzu Filament Repair at SIS 2086Filament repairs for all Shimadzu mass specs - QP1000, QP2000, QP5000
- Waters/VG Micromass GCT Filament 2060SIS VG Micromass GCT filament
Varian Saturn Ion Trap Filaments 2047Quality replacement filaments for your Ion Trap mass spectrometer. For Saturn model 2000, 2100, 2200 series
Varian Filament Repair 2040Filaments repaired for your Varian mass spectrometer.
Thermo/Finnigan MAT 4000 Filament Posts 2023These filament posts are the same composition as the original posts on the Finnigan 4000 filaments.
Waters 7070, Trio, Quattro Filament 1994VG Mass Spec filaments by SIS - three and five coil.
Thermo Filament Repair at SIS 1983Filament repairs for all of your Thermo instruments.
SISAlloy® (Yttria/Rhenium Alloy) MS Filaments 1975SIS introduces their new Yttria Rhenium alloy filament wire. In these studies we have discovered that by alloying Rhenium with a small concentration of Yttria, the crystal structure of the rhenium material was altered, which resulted in a stronger filament that is much less susceptible to warping
VG/Waters/Fisons Filament Repair 1904Your filaments are repaired and returned to you.- Copper Filament & Heater Material 1892Copper wire has an extremely high electrical conductivity making it highly suitable for electrical connections and thermal conductivity applications.
Thermo/Finnigan 5100 Ceramic Body Filament 1883The 0.032" diameter filament leads protrude out of the side to clear the source block and permit attachment with two in-line connectors.- Perkin Elmer Marathon Filament Yttria Coated 1847Yttria Coated PE Marathon Filaments
Perkin Elmer / Torion / Hitachi Filament Repair 1834All RMU filaments and heaters are repairable.
Thermo/Finnigan 3200/3000 Ceramic Body Filaments 1831The short metal posts hold the filament wire straight while tension is maintained, thereby minimizing sagging.- Chromalloy O - Filament and Heater Material 1781Chromalloy O wire is an alloy wire used at operating temperatures up to 1200°C. Its chemical composition gives good oxidation resistance especially under conditions of frequent switching or wide temperature fluctuations. Applications include heating elements in both domestic and industrial appliances and in control resistors.
- Constantan Filament & Heater Material 1752Constantan is a copper/nickel alloy used in the production of thermocouples and thermocouple extension wires as well as precision resistors and low temperature resistance heating applications.
- Kovar Wire - Filament and Heater Material 1728Kovar wire is a nickel iron alloy commonly used in lead wire for mercury switches and in semiconductor devices. It is also widely used in power tubes, microwave tubes, diodes, and transistors.
Thermo/Finnigan OWA® and 3000 Filament Posts 1721Thermo filament posts are available to replace damaged or worn posts on the 3000 series and OWA filaments.- Iron Wire - Filament and Heater Material 1688Iron wire is a resistance type wire often used for the manufacture and repair of filaments and heaters.
- Alumel - Filament & Heater Wire Material 1680Alumel is a nickel/aluminum magnetic alloy used in the production of thermocouples and thermocouple extension wires.
- Chromel (90% NI/10% CR) Filament Materials 1680Chromel is a nickel/chromium alloy used in the production of thermocouples and thermocouple extension wires.
- Agilent/HP MS 5970 MSD® and 599X Series Filament 1670New filaments for your Agilent 5970 MSD.
- Gold Wire - Filament and Heater Material 1652High purity gold wire for a wide range of uses including gasket fabrication and sputter coating and other scientific applications.
- Rhodium/Platinum Wire - Filament and Heater Material 1652Rhodium/Platinum wire and ribbon are highly resistant to oxidation and corrosion at high temperatures and are used in the production of thermocouples
Thermo/Finnigan OWA 3200 with Extrel Upgrade Filament 1622These filaments are the same as our FF3200 and SF5100 filaments but they have a tungsten coil in place of the usual rhenium ribbon.
Thermo/Finnigan OWA and 3000 Ceramic Body Filament 1530Our ceramic body one piece construction provides maximum strength, is self-aligning, and will minimize filament sagging.- Iridium Wire and Ribbon - Filament and Heater Material 1393Iridium wire is the most corrosion-resistant wire known, and is often used for the manufacture and repair of filaments and heaters and electrical applications.
- Silver Wire and Ribbon - Filament and Heater Material 1393Silver wire and ribbon has the highest electrical and thermal conductivity of all metals. It is used to make lead wires for some mass spectrometer filaments and heaters.
Yttria Coated SISAlloy® (Yttria/Rhenium Alloy) Mass Spec Filaments 1376SIS can repair your filaments with our non-sagging filament wire (SISAlloy® yttria/rhenium alloy with yttria coating). Users have experienced filament lifetime increases of 2 to 3 times compared to the standard uncoated rhenium filaments.- Tantalum Wire and Ribbon - Filament and Heater Material 1364Tantalum Wire and Ribbon is corrosion resistant and has good thermal conductivity. Some of its uses is in the manufacture of heating elements, vacuum tubes and other high temperature parts
- Tungsten Wire, Ribbon, Filament Wire for Electron Emitters, Heater Wire 1363Buy tungsten wire, ribbon for mass spectrometer heaters here. Choose from varying thickness, Tungsten filament wire sold by the foot.
- Rhenium Wire and Ribbon - Filament and Heater Material 1327Rhenium Wire and Ribbon is used to manufacture filaments for mass spectrometers and ion gauges as well as medical applications.
- Tantalum/Tungsten Wire and Ribbon - Filament and Heater Material 1289Tantalum/Tungsten Wire and Ribbon has excellent corrosion resistance and is used in the manufacture of heating elements.
- Nickel Wire and Ribbon - Filament and Heater Material 1251Nickel wire provides good corrosion resistance. It is most suitable for use in electronic components, temperature sensors, electrical resistance thermometers and other electrical applications.
Mass Spec Source Cleaning Service at SIS (7) 180Expert cleaning & repair of mass spectrometer sources.
DCI/DEP Probe 163The DCI probe utilizes a replaceable filament wire at the end of the probe which serves to both hold the sample and heat the sample.
Ionization Gauge Tubes, Bayard-Alpert Type 156Bayard-Alpert Design and Dual Tungsten or Burn-out Resistant Iridium
Wire Material for Scientific Applications (29) 156A wide range of resistance type wires and precious metals for the repair and manufacture of filaments and heaters for mass spectrometers, SEM's and scientific instruments.
Perkin Elmer Inner Source Cleaning 151Scientific Instrument Services provides a mass spectrometer source cleaning service. We can expertly clean and service most models of mass spectrometer sources including filament repair. Fast turn-around of repairs. Cleaning of entire source block, lenses, insulators, filament and repeller assembly.
New DCI Probe Tip Design for the VG Mass Spectrometers 150The new design incorporates a Vespel® DCI Probe Tip Base which plugs into the tip of your existing probe.- Agilent MS Source Cleaning (3) 139Scientific Instrument Services provides a mass spectrometer source cleaning service. We can expertly clean and service most models of mass spectrometer sources including filament repair. Fast turn-around of repairs
- Agilent/HP 5971 Source Cleaning 139Agilent 5971 Mass Spec Source Cleaning. Cleaning and polishing of all metal parts are followed by thorough washing and bake out in an oven. Repair of both filaments.
Agilent/HP 5972/73/75/77 and GCD Source Cleaning 139Cleaning and polishing of all metal parts are followed by thorough washing and bake out in an oven.
Perkin Elmer Outer Source Cleaning 133Scientific Instrument Services provides a mass spectrometer source cleaning service. We can expertly clean and service most models of mass spectrometer sources including filament repair. Fast turn-around of repairs. Cleaning of entire source block, lenses, insulators.- Stainless Steel Wires and Ribbons 133Stainless Steel wire does not stain, corrode or rust easily as ordinary steel wire.
- Thermo 1020, OWA Supplies and Services 133The Thermo 1020 and OWA™ (organics in water analyzer) are quadrupole GC/MS systems, released circa ~1979. OWA, 1020 Replacement Parts Aluminum Oxide Abrasive Capillary Tube Probe Springs Ceramic Insulators Diffusion Pump Heater Ferrules, PTFE Ion Gauge Ferrules, Jet Separator Ferrules, GC Filament - Ceramic Body (new S.I.S. design) Filament - Extrel Upgrade Filament Posts Filament Material Gaskets, Copper Gaskets, Gold Plated Inlet Ceramic Ion Gauge Tube O-Rings Pump Oils, Difusion Pump Oils,...
- Perkin Elmer MS Source Cleaning (4) 132Scientific Instrument Services provides a mass spectrometer source cleaning service. We can expertly clean and service most models of mass spectrometer sources including filament repair. Fast turn-around of repairs. Inner and Outer sources can be cleaned by SIS.
- Finnigan MAT TSQ 70, 700 Supplies and Services 131TSQ Replacement Parts
- Finnigan MAT Ion Trap Supplies and Services 117Ion Trap Replacement Parts Aluminum Oxide Abrasive Ceramic Insulators Cartridge Heater for Interface Diffusion Pump Heater Ferrules, 0.4 and 0.5 mm Filaments, source Filament Material Flange, Ion Gauge, Flared Sample Vials Gaskets, Copper Gaskets, Gold Plated Heater Cartridge Ion Gauge, High Sensitivity Jet Separator O-Rings Pump Oils, Diffusion Pump Oils, Rough Rulon Insert Sample Vials, Flared Sample Vials, Straight Thermocouple Gauge Tube Ion Trap Repair Services Filament Repair Source Heater...
- Mass Spectrometry - Kratos - Supplies/Services 108Scientific Instrument Services offer a range of supplies and services for the Kratos (Shimadzu division) mass spectrometers and instruments.
Mass Spectrometry - Supplies for the Thermo Finnigan 3200, OWA (3) 108Supplies and service for the Finnigan 3200 quadrupole GC/MS, circa 1976.
Thermo/Finnigan MAT 4500/4600/TSQ Lead Assembly and Collector Lead
Assembly 101Complete assembly includes ceramic insulator and electrical connectors.- Molybdenum Wire and Ribbon 95Molybdenum wire is used in a broad range of applications in many industries. Mandrels for making tungsten filaments along with leads, filament supports, and seals are among a few.
- Hewlett Packard 5971 Supplies and Services 84HP 5971 Replacement Parts Autosampler Vials Brass Nut Ceramic Insulators Convectron Gauge Tube Copper Gaskets Diffusion Pump Fluid Electron Multipliers Electron Multiplier - High Sensitivity Fuses GC Injection Port Liners Hose Adaptor Fitting Injection Port Liner Injection Port Liner Seal Inline Connector Ion Gauge Tubes Jet Cleaning Kit Jet Separators Macrobore Jet Separator Pump Oil Syringes, Autosampler Transfer Line Tip Vacuum Measurement System Vacuum Pumps Hewlett Packard 5971 Repair Servi...
Micro Ion Gauge
(for Agilent 5975/5977) 84Micro ion vacuum gauge (G3170-80001)- Varian Saturn Ion Trap Supplies and Services 84Scientific Instrument Services offer a wide range of supplies and services for the Varian Saturn Ion Trap mass spectrometers. If an item is not listed, contact us and we will try to add it our product line. Varian Saturn Ion Trap Replacement Parts Copper Gaskets Diffusion Pump Fluid Electron Multipliers Ferrules Filaments Gold Patted Copper Gaskets
STABIL-ION® VACUUM MEASUREMENT SYSTEM 79Highest Long-Term Accuracy Vacuum Gauge from Granville Phillips and Improved Long-Term Accuracy
Triode Style and Mini Bayard-Alpert Ion Gauge Tubes 71Triode and Mini Bayard Alpert style ionization gauge tubes are ideal for use in analytical instrumentation- Thermo/Finnigan MAT Copper and Silver Lead Wire 67Finnigan has routinely used 0.020" diameter copper in the past for this purpose.
- Varian MAT Supplies and Services
(311 and Others) 67Varian MAT Replacement Parts Aluminum Oxide Abrasive Ceramic Insulators Diffusion Pump Heater Electron Multiplier FAB Probe Tip Ferrules, PTFE Ion Gauge Ferrules, Jet Separator Ferrules, GC Filament Material Gaskets, Copper Gaskets, Gold Plated Ion Gauge, High Sensitivity Jet Separator O-Rings Pump Oils, Diffusion Pump Oils, Rough Sample Vials, Flared Sample Vials, Straight Thermocouple Gauge Tube 
SIS AP2000 AutoProbe™ 65Automated direct insertion probe for the Thermo PolarisQ™ and TRACE DSQ™ mass spectrometers. Samples in about 3 minutes. Open Access and Xcalibur™ integration.- Agilent (Hewlett Packard) Mass Spectrometer Replacement Parts 59Air Cleaners, Data System Autosampler Vials Brass Nut Ceramic Insulators Clamp Insulator, 5989 Convectron Gauge Tube Copper Gaskets Diffusion Pump Fluid Engine, Additional Parts Ferrules Filaments, 5970 Filaments, 5989 Hose Adaptor Fittings Injection Port Liner Seal Inline Connector Interface Heater/Sensor Assembly Interface Gaskets, 5970 Ion Gauge Tubes Ion Gauge Tube, 5972 Ion Gauge Tube, 5989 Ion Gauge Tube Cable Jet Separators, 5970 Lead Protector Lens Insulator Jet Separator Cleaning Kit O...
SIS AP1000 AutoProbe™ 58Automated direct insertion probe for the Thermo TRACE™ mass spectrometer. Samples in about 3 minutes. Open Access and Xcalibur™; integration.- Nichrome Wire and Ribbon
(80%NI/20% CR) 58Buy Nichrome Wire, Non Magnetic Ribbon for mass spectrometer heaters here. Choose from varying thickness, Nichrome filament wire sold by the foot. - VG/Fisons Mass Spectrometer Supplies and Services 58Scientific Instrument Services offer a wide range of supplies and services for the VG/Fisons mass spectrometers. If an item is not listed, contact us and we will try to add it our product line. VG/Fisons Repair Services Back Plate Bellows Repair DCI Probe Tip Repair Diffusion Pump Fluid Probe Tip Repair VG/Fisons Replacement Parts Ceramic Insulators Ceramic Tubing, 6 hole Computer Air Filters Copper Gaskets DCI Probe Tip - New Design Direct Probe Tips FAB Parts FAB Probe FAB Probe Tips Filaments...
Varian Thermocouple Vacuum Gauge Tube Model 531 53Thermocouple gauges measure pressure in terms of the amount of heat that gas will conduct away from a hot wire.
Mass Spec Handbook of Service - Volume II 50Mass spectrometry service guide.600+ page catalog also available.
Thermo/Finnigan MAT Incos 50B Vacuum Measurement System 50Easily mounts to Incos 50B, Accurate Vacuum Measurement, Bayard-Alpert Design, Convenient Bench Top Enclosure
Vacuum Quality Monitor System (835 VQM™, Granville-Phillips®) 47The world’s fastest, lowest power, gas compositional analysis autoresonant ion trap mass spectrometer (IT-MS) instrument with full data collection, spectral deconvolution, and data logging software. Compact size. 1–145 amu at 85 ms capture rates or 1-300 amu at 120 msec. UHV to 10-5 Torr, or 3 Torr with differential pump. Usually coupled with a total pressure gauge to provide partial pressures of each gas.
VG Source and Thermospray Heaters 44Replacement heaters for VG mass specs.
Bayard-Alpert Ionization Gauge Controllers 42The Granville-Phillips Model 330 Ionization Gauge Controller is reliable, easy to operate, easy to service and moderately priced.- Rhenium/Tungsten Wire and Ribbon 42Rhenium/Tungsten Wire and Ribbon is used in the manufacture of mass spectrometer filaments and heater coil as well as in the manufacture of thermocouples.
Sauereisen Ceramic Cement 42A superior electrical insulation for Heaters, Elements and Furnaces
The SW 110 Multi-Purpose Spot Welder 42The versatile SW 110 multi-purpose welder occupies minimum counter space and is very lightweight and small for use in repairing small instrument parts including MS filaments.
Apiezon Oil AP 301 33AP 301 consists of a precisely formulated mixture of synthetic organic hindered esters of the type used in supersonic aircraft engine lubrication, together with inhibitors and passivators, all of which have been carefully selected with special attention to their vapor pressure characteristics.
Heater Coils 33Standard size coils are used on several mass spectrometer heaters repaired by S.I.S.
Swabs and Applicators 33Variety of swabs and applicators for specialized cleaning tasks. Non-abrasive and absorbent. Dispense liquids evenly.- Thermo/Finnigan Part Number Cross Reference 33Scientific Instrument Services carries a wide selection of parts for all models of Thermo/Finnigan mass spectrometers. In order to aid you in the selection of replacement parts for your instrument, the following part number cross reference chart can be used. If a part number is not listed, it either means we do not have that part in our inventory or perhaps we are not aware of the Thermo part number in relation to our inventory. If you are looking for a part not listed below, use our Search Syst...
Lymtech Scientific Validated Sterile Wipes 29Sterile wipes. Gamma irradiated to Standard AAMI/ISO 11737-Method 1.
Bullet Blender® Homogenizer 17The Next Advance Bullet Blender allows you to homogenize 24 samples at a time.
Print Catalog A. Mass Spectrometer Supplies & Service (40) 147SIS Vol. 36 catalog Section A - MS Supplies and Services.Filament & Heater Repair
(Catalog A17) 2074Filament & Heater Repair
(Catalog A18) 1967X-Ray Generator Filament & Heater Repair
(Catalog A19) 1524New Mass Spec Filaments
(Catalog A22) 1554Micro-Mesh® Cushioned Abrasive Sheets
(Catalog A63) 33
Print Catalog B. Supplies for Specific Mass Spectrometers (12) 153SIS Vol. 36 catalog Section B - Supplies for specific mass spectrometers.Agilent Repair Services
(Catalog B3) 288Agilent Repair ServicesAgilent MS Parts
(Catalog B7) 159Thermo Filament Repair
(Catalog B14) 1802Thermo Mass Spec Filaments
(Catalog B15) 1686Waters/VG/Micromass Accessories
(Catalog B23) 47Vacuum Quality Monitor System
(Catalog F20) 42Vacuum Quality Monitor System
(Catalog F21) 42Bayard-Alpert Ionization Gauge Controllers
(Catalog F30) 42Micro-Mesh® Cushioned Abrasives
(Catalog G2) 33
Table of Contents
(Print Catalog) (51) 92Table of Contents of the Scientific Instrument Services general catalog volume 36.