- ▶
- Heaters/Source
- ▶
- Agilent Heaters and SensorsMass Spectrometry, Scientific Supplies & ManufacturingScientific Instrument Services 5973 Source Heater Tamper Resistant Allen Wrench 5973/5975 Quad Sensor 5985 Source Heater Assembly Agilent Interface Heater Assembly 5971 Interface Heater
- ▶
- LCColumns - HPLC Guard Columns Tubing (LC) Fitting & Ferrules - VICI (HPLC/UHPLC) Fitting & Ferrules - Optimize EXP/2 (UHPLC) Connectors - Optimize OPTI-LYNX™ (HPLC) Syringes Syringe Pumps - New Era Syringes - Automated Filters Solvent Delivery Accessories Flow Splitters Pulse Damper - FlatLine™ Check Valves Seals & Pistons Lamps/Replacement Tools for Chromatography Column Heater Autosampler Replacement Parts Maintenance Kits SGE HPLC Supplies By Brand Optimize Supplies PerfectPeak® Solvent Inlet Filters PerfectPeak® Static Mixers Other LC Supplies nanoLiter Programmable Wave APPI Source - Syagen Catalog Page E1
- ▶
- SGE HPLC Supplies By Brand (This Page)
Syringes SGE HPLC products available from Scientific Instrument Services, Inc.- Sample Flushing/Pump Priming SGE HPLC products available from Scientific Instrument Services, Inc.
Summary of SGE HPLC Packings
Quality
SGE has chosen packing materials to provide the highest efficiency, mechanical strength and performance. The table below illustrates the physical and chemical characteristics of packings used by SGE. All SGE columns are tested and supplied with their original chromatogram.
Packings
Wakosil II ™ 5C18 RSHigh purity C-18 packing with very uniform phase coverage. Super end-capping assures excellent results when separating acids and bases.
ExsiI ™Very good general purpose packings. Available in a variety of popular phases, loadings, and particle sizes.
Inertsil ™Low residual silanol levels make Inertsil the preferred packing for acidic and basic compounds, especially when combined with a glass lined column.
Nucleosil™Nucleosil fully end-capped packings all have 300 pore sizes and 5µm particles and are ideal for analysis of proteins, peptides, and other biomolecules.
Hypersil®Available from SGE only in glass-lined columns, this industry standard C18 material offers high separation efficiency and symmetrical peak shapes. Applicable to the separation of a broad range of compounds with respect to polarity.
Ion ExchangeSGE offers both Strong Cation Exchange (SCX) and Strong Anion Exchange (SAX) materials in stainless steel or glass lined columns.
| Packing | End Capping | Phase Loading %w:w | Particle Size (mm) | Surface Area (m2/g) | Mean Pore Size (?) | pH Range |
| Wakosil lI 5C18 RS(C18) | Ultra | 17:05 | 350 | 120 | 136-137 | 1.4-9.4 |
| EXSIL PACKINGS | ||||||
| ExsiI ODS2 (C18) | Fully | 12:05 | 220 | 80 | 138 | 2-7 |
| Exsil ODS2 (C18) | Fully | 12:03 | 220 | 80 | 138 | 2-7 |
| Exsil C8 | Fully | 12:05 | 220 | 80 | 138 | 2-7 |
| Exsil Phenyl | Part | 3:05 | 220 | 80 | 139 | 2-7 |
| Exsil Silica | 5 | 220 | 80 | 139 | 2-7 | |
| Exsil Cyano propyl | 3.5:5 | 220 | 80 | 139 | 2-7 | |
| Exsil Amino | 2:05 | 220 | 80 | 139 | 2-7 | |
| lnertsil ODS-2 (C18) | Ultra | 18.5 | 320 | 150 | 140 | 2-7 |
| Hypersil® ODS (C18) | Fully | 10:05 | 175 | 120 | 142 | 2-7 |
| ION EXCHANGE | ||||||
| n-propyl-n,n,n-trimethyl ammonium (SAX) | 5 | 220 | 80 | 142 | 2-7 | |
| Sulphonic Acid (SCX) | 5 | 220 | 80 | 142 | 2-7 | |
| NUCLEOSIL 300? PACKINGS | ||||||
| Nucleosil 300? ODS | Fully | 6:05 | 190 | 300 | 141 | 2-7 |
| Nucleosil 300? C8 | Fully | 2:05 | 190 | 300 | 141 | 2-7 |
Hypersil® is a registered trademark of Thermo Electron Corp.