Home
- ▶
- Heaters/Source
- ▶
- Agilent Heaters and SensorsMass Spectrometry, Scientific Supplies & ManufacturingScientific Instrument Services 5973 Source Heater Tamper Resistant Allen Wrench 5973/5975 Quad Sensor 5985 Source Heater Assembly Agilent Interface Heater Assembly 5971 Transfer Line PRT 5971 Interface Heater
- ▶
- Filaments
- ▶
- Varian Saturn (This Page)
Hover over image to zoom
Price: 112
Product ID : FF700
FF700 ITD Filament, Varian Saturn [Varian #03-920437-00]
Description
The plug-in style filaments for the Thermo and Varian Ion Trap® instruments are available from S.I.S. These are direct replacements for those supplied by Thermo, Varian, Perkin-Elmer, Teledyne and Hitachi. Each filament assembly contains two rhenium ribbon filaments accurately tensioned and aligned for optimum performance. The circular filament press is constructed from high purity alumina ceramic.
Saturn model 2000, 2100, 2200 series.
Ion Trap® is a registered trademark of Thermo MAT.
Thermo Filament Repair at SIS Filament repairs for all of your Thermo instruments.
Electron Multiplier Detectors Search over 200 electron multiplier detectors to match your instrument, mass spec, or other application. Multipliers from top manufacturers including DeTech and ETP.
Mass Spectrometry - Thermo/Finnigan SIS supplies new parts or repairs old parts on your Thermo/Finnigan instrument.
Copper Gaskets for Vacuum Flanges The below listed vacuum flange copper gaskets are made from OFHC copper.
Varian Ion Trap Copper and Gold Plated Copper Gaskets S.I.S. carries copper and gold plated copper gaskets for the Varian Saturn.
Copper and Gold Plated Cu Gaskets for Thermo/Finnigan MS The following copper and gold plated copper gaskets are available
for the vacuum flanges on Thermo/Finnigan mass spectrometers.
DeTech 382 Electron Multiplier for Varian Saturn™ 2000, Varian 4000 Ion Trap For instruments: Varian Saturn™ 2000, Varian 4000 Ion Trap
Inland 45 Mechanical Pump Oil Inland 45 is the highest quality rough pump oil you can use for your mass spectrometer.
Ferrules for Varian Saturn Ion Trap Mass Spec The 1/4" graphitzed Vespel® ferrule with a .5mm and a .4mm hole.
Ferrules for Thermo/Finnigan Ion Trap 0.4 and 0.5 mm 1/4" graphitzed Vespel® ferrules with a 0.4mm or a 0.5mm hole