Rhodium/Platinum Wire. Rhodium/Platinum wire and ribbon are highly resistant to oxidation and corrosion at high temperatures and are used in the production of thermocouples
|Part No.||Diameter (in)||Diameter (mm)||(ohms/cm)||Price
|10% Rhodium / 90% Platinum Wire|
|W465||10% Rhodium/90% Platinum Wire|
|40% Rhodium / 60% Platinum Wire|
|W360||40% Rhodium/60% Platinum Wire|
|0.008||0.20||0.06048||$81.00†10 or more: 5% off; 50 or more: 10% off.|
|Unit of measure for ordering is Foot.|
|† Quantity discount 10 or more: 5% off; 50 or more: 10% off.|
|* Standard lead time for wire is 48 hours.|
|Ordering information. International (non-US) prices available through your local dealer.|
- Wire Material for Scientific Applications A wide range of resistance type wires and precious metals for the repair and manufacture of filaments and heaters for mass spectrometers, SEM's and scientific instruments.
- MS Heaters and Temperature Sensors Replacement heaters and temperature sensors for your mass spectrometer.
- Heat Coils Standard size coils are used on several mass spectrometer heaters repaired by S.I.S.
- Platinum Resistance Thermometer Elements These PRT elements can be used with precision laboratory and industrial instruments.
Buy Nichrome Wire, Non Magnetic Ribbon for mass spectrometer heaters here. Choose from varying thickness, Nichrome filament wire sold by the foot.
Platinum Wire is used in many applications including gasket or o-ring fabrication, thermocouples, electrical contacts, and heater coils.
Tantalum Wire and Ribbon is corrosion resistant and has good thermal conductivity. Some of its uses is in the manufacture of heating elements, vacuum tubes and other high temperature parts
Iridium wire is the most corrosion-resistant wire known, and is often used for the manufacture and repair of filaments and heaters and electrical applications.
Rhenium/Tungsten Wire and Ribbon is used in the manufacture of mass spectrometer filaments and heater coil as well as in the manufacture of thermocouples.
Chromalloy O wire is an alloy wire used at operating temperatures up to 1200°C. Its chemical composition gives good oxidation resistance especially under conditions of frequent switching or wide temperature fluctuations. Applications include heating elements in both domestic and industrial appliances and in control resistors.
For those users who have their own spotwelder, we offer the platinum wire and ribbon from which you can make your own heater coils or ribbons for the CDS pyroprobe. W214 : Platinum Wire, Diameter (in)=0.014, Diameter (mm)=0.36, (ohms/cm)=0.01045,W215 : Platinum Ribbon, Thickness (in)=0.0005, Width (in)=0.090, Thickness (mm)=0.0127, Width (mm)=2.29, (ohms/cm)=0.03658
Molybdenum wire is used in a broad range of applications in many industries. Mandrels for making tungsten filaments along with leads, filament supports, and seals are among a few.