Beware of recent phishing e-mails. Use our official contact addresses only.
413-284-9975
Adaptas

Thermal Desorption Sample Collection Systems

  • Sample Collection SystemSample Collection System
    This Sample Collection System permits the purging of volatiles and semi-volatile components present in solid materials and their trapping on Desorption Tubes packed with an adsorbent resin for subsequent analysis by desorption utilizing the Short Path Thermal Desorption System.
  • Extraction CellExtraction Cell
    The Extraction Cell system consists of two stainless steel plates which are separated by an inter-changeable PTFE insert.
  • Heated Thermal Desorption Sampling ChambersHeated Thermal Desorption Sampling Chambers
    Heated Thermal Desorption Sampling chamber
  • Desorption Tube Injection HeadDesorption Tube Injection Head
    This device is used to inject or load liquid samples directly into the S.I.S. Thermal Desorption Tubes, forcing the syringe contents onto the adsorbent resins in the desorption tube without any loss of sample due to back evaporation.
  • SIS Purge & Trap SystemSIS Purge & Trap System
    All products related to the Purge and Trap System with accessories.
  • Gillibrator Air Flow Calibration SystemGillibrator Air Flow Calibration System
    The new Gilibrator System from Gilian is an easy to use Primary Standard for the calibration of Air Sampling equipment.
  • Air Sampling PumpAir Sampling Pump
    The LFS-113 provides for constant flows between 5 to 200 mL/min at variable back pressures up to 25" of H2O for use in pumping air or gas samples through the S.I.S. Short Path Thermal Desorption Sampling Tubes.