Catalog A31
Home
- ▶
- Heaters/Source
- ▶
- Agilent Heaters and SensorsMass Spectrometry, Scientific Supplies & ManufacturingScientific Instrument Services 5973 Source Heater Tamper Resistant Allen Wrench 5973/5975 Quad Sensor 5985 Source Heater Assembly Agilent Interface Heater Assembly 5971 Transfer Line PRT 5971 Interface Heater
- ▶
- WireAlumel (95% Al/5% NI) Chromalloy O Chromel (90% NI/10% CR) Constantan (55% CU/45%NI) Copper (OFHC) Gold Inconel 600 Inconel X750 Iridium Iron Kovar 50%Moly/50% Rhenium Molybdenium Nichrome (80% NI/20% CR) Nickel NI52 Alloy (50% NI/50% FE) Platinum Rhenium Rhenium / Tungsten Rhodium / Platinum Silver Stainless Steel Type 302 & 304 Tantalum 90% Tantalum / 10% Tungsten Tungsten NEW - SISAlloy™ (Yttria/Rhenium Alloy) Heater Coils
- ▶
- Alumel (95% Al/5% NI) (This Page)
Description
Alumel - Nickel (95%) Aluminum (5%) Wire (K Thermocouple -). Alumel is a nickel/aluminum magnetic alloy used in the production of thermocouples and thermocouple extension wires.
| Part No. | Diameter (in) | Diameter (mm) | (ohms/cm) | Stock/ Lead Time |
UOM | Price | Order | |
|---|---|---|---|---|---|---|---|---|
| W369 | Alumel Wire | |||||||
| 0.005 | 0.13 | 0.23600 | DISCONTINUED | EA | ---‡10 or more: 5% off; 50 or more: 10% off. | --- | ||
| W380 | ALUMEL WIRE .008 | |||||||
| --- | --- | --- | 48 hours†Standard lead time for wire is 48 hours. | Foot | CALL‡10 or more: 5% off; 50 or more: 10% off. | |||
| W370 | Alumel Wire | |||||||
| 0.010 | 0.25 | 0.05827 | DISCONTINUED | EA | ---‡10 or more: 5% off; 50 or more: 10% off. | --- | ||
| W371 | Alumel Wire | |||||||
| 0.015 | 0.38 | 0.02597 | 48 hours†Standard lead time for wire is 48 hours. | EA | $3.00‡10 or more: 5% off; 50 or more: 10% off. | |||
| W372 | Alumel Wire | |||||||
| 0.020 | 0.50 | 0.01442 | DISCONTINUED | EA | ---‡10 or more: 5% off; 50 or more: 10% off. | --- | ||
| W381 | Alumel Wire | |||||||
| 0.032 | 0.81 | 0.00700 | DISCONTINUED | EA | ---‡10 or more: 5% off; 50 or more: 10% off. | --- | ||
| ‡ Quantity discount 10 or more: 5% off; 50 or more: 10% off. | ||||||||
|
* Call for availability. † Standard lead time for wire is 48 hours. | ||||||||
Ordering information.
International (non-US) prices available through your
local dealer.
|
||||||||
- Wire Material for Scientific Applications A wide range of resistance type wires and precious metals for the repair and manufacture of filaments and heaters for mass spectrometers, SEM's and scientific instruments.
MS Heaters and Temperature Sensors Replacement heaters and temperature sensors for your mass spectrometer.
Heat Coils Standard size coils are used on several mass spectrometer heaters repaired by S.I.S.
Platinum Resistance Thermometer Elements These PRT elements can be used with precision laboratory and industrial instruments.
Chromel (90% NI/10% CR) Filament Materials Chromel is a nickel/chromium alloy used in the production of thermocouples and thermocouple extension wires.
Silver Wire and Ribbon - Filament and Heater Material Silver wire and ribbon has the highest electrical and thermal conductivity of all metals. It is used to make lead wires for some mass spectrometer filaments and heaters.
Copper Filament & Heater Material Copper wire has an extremely high electrical conductivity making it highly suitable for electrical connections and thermal conductivity applications.
Nickel Wire and Ribbon - Filament and Heater Material Nickel wire provides good corrosion resistance. It is most suitable for use in electronic components, temperature sensors, electrical resistance thermometers and other electrical applications.
Constantan Filament & Heater Material Constantan is a copper/nickel alloy used in the production of thermocouples and thermocouple extension wires as well as precision resistors and low temperature resistance heating applications.
Nichrome Wire, Nickel Chromium Ribbon, Non-Magnetic Alloy for Heating Elements Buy Nichrome Wire, Non Magnetic Ribbon for mass spectrometer heaters here. Choose from varying thickness, Nichrome filament wire sold by the foot.