Catalog A31
Home
- ▶
- Heaters/Source
- ▶
- Agilent Heaters and SensorsMass Spectrometry, Scientific Supplies & ManufacturingScientific Instrument Services 5973 Source Heater Tamper Resistant Allen Wrench 5973/5975 Quad Sensor 5985 Source Heater Assembly Agilent Interface Heater Assembly 5971 Interface Heater
- ▶
- WireAlumel (95% Al/5% NI) Chromalloy O Chromel (90% NI/10% CR) Constantan (55% CU/45%NI) Copper (OFHC) Gold Inconel 600 Inconel X750 Iridium Iron Kovar 50%Moly/50% Rhenium Molybdenium Nichrome (80% NI/20% CR) Nickel NI52 Alloy (50% NI/50% FE) Platinum Rhenium Rhenium / Tungsten Rhodium / Platinum Silver Stainless Steel Type 302 & 304 Tantalum 90% Tantalum / 10% Tungsten Tungsten NEW - SISAlloy™ (Yttria/Rhenium Alloy) Heater Coils
- ▶
- Chromalloy O (This Page)
Description
Chromalloy O Wire. Chromalloy O wire is an alloy wire used at operating temperatures up to 1200 °C. Its chemical composition gives good oxidation resistance especially under conditions of frequent switching or wide temperature fluctuations. Applications include heating elements in both domestic and industrial appliances and in control resistors.
| Part No. | Diameter (in) | Diameter (mm) | (ohms/cm) | Stock/ Lead Time |
Price EA |
Order | |
|---|---|---|---|---|---|---|---|
| W373 | Chromalloy O Wire | ||||||
| 0.010 | 0.25 | 0.26800 | DISCONTINUED | --- | --- | ||
| * Call for availability. | |||||||
Ordering information.
International (non-US) prices available through your
local dealer.
|
|||||||
- Wire Material for Scientific Applications A wide range of resistance type wires and precious metals for the repair and manufacture of filaments and heaters for mass spectrometers, SEM's and scientific instruments.
MS Heaters and Temperature Sensors Replacement heaters and temperature sensors for your mass spectrometer.
Heat Coils Standard size coils are used on several mass spectrometer heaters repaired by S.I.S.
Platinum Resistance Thermometer Elements These PRT elements can be used with precision laboratory and industrial instruments.
Rhodium/Platinum Wire - Filament and Heater Material Rhodium/Platinum wire and ribbon are highly resistant to oxidation and corrosion at high temperatures and are used in the production of thermocouples
Tungsten Wire, Ribbon, Filament Wire for Electron Emitters, Heater Wire Buy tungsten wire, ribbon for mass spectrometer heaters here. Choose from varying thickness, Tungsten filament wire sold by the foot.
Chromel (90% NI/10% CR) Filament Materials Chromel is a nickel/chromium alloy used in the production of thermocouples and thermocouple extension wires.
Nichrome Wire, Nickel Chromium Ribbon, Non-Magnetic Alloy for Heating Elements Buy Nichrome Wire, Non Magnetic Ribbon for mass spectrometer heaters here. Choose from varying thickness, Nichrome filament wire sold by the foot.
Platinum Wire and Ribbon Platinum Wire is used in many applications including gasket or o-ring fabrication, thermocouples, electrical contacts, and heater coils.
Platinum Wire and Ribbon for CDS Pyroprobe For those users who have their own spotwelder, we offer the platinum wire and ribbon from which you can make your own heater coils or ribbons for the CDS pyroprobe. W214 : -,W215 : -
Constantan Filament & Heater Material Constantan is a copper/nickel alloy used in the production of thermocouples and thermocouple extension wires as well as precision resistors and low temperature resistance heating applications.
Alumel - Filament & Heater Wire Material Alumel is a nickel/aluminum magnetic alloy used in the production of thermocouples and thermocouple extension wires.