Catalog A32
Home
- ▶
- Heaters/Source
- ▶
- Agilent Heaters and SensorsMass Spectrometry, Scientific Supplies & ManufacturingScientific Instrument Services 5973 Source Heater Tamper Resistant Allen Wrench 5973/5975 Quad Sensor 5985 Source Heater Assembly Agilent Interface Heater Assembly 5971 Interface Heater
- ▶
- WireAlumel (95% Al/5% NI) Chromalloy O Chromel (90% NI/10% CR) Constantan (55% CU/45%NI) Copper (OFHC) Gold Inconel 600 Inconel X750 Iridium Iron Kovar 50%Moly/50% Rhenium Molybdenium Nichrome (80% NI/20% CR) Nickel NI52 Alloy (50% NI/50% FE) Platinum Rhenium Rhenium / Tungsten Rhodium / Platinum Silver Stainless Steel Type 302 & 304 Tantalum 90% Tantalum / 10% Tungsten Tungsten NEW - SISAlloy™ (Yttria/Rhenium Alloy) Heater Coils
- ▶
- Nickel (This Page)
Description
Nickel Wire and Ribbon. Nickel wire provides good corrosion resistance. It is most suitable for use in electronic components, temperature sensors, electrical resistance thermometers and other electrical applications.
| Nickel Wire (99.8% Purity) | ||||||||||||
| Part No. | Diameter (in) | Diameter (mm) | (ohms/cm) | Stock/ Lead Time |
UOM | Price | Order | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| W69 | Nickel Wire | |||||||||||
| 0.005 | 0.13 | 0.07874 | 48 hours*Standard lead time for wire is 48 hours. | Foot | $6.90|10 or more: 5% off; 50 or more: 10% off. | |||||||
| W75 | Nickel Wire | |||||||||||
| 0.007 | 0.18 | 0.03772 | 48 hours*Standard lead time for wire is 48 hours. | Foot | $7.00|10 or more: 5% off; 50 or more: 10% off. | |||||||
| W70 | NICKEL WIRE | |||||||||||
| --- | --- | --- | 48 hours*Standard lead time for wire is 48 hours. | EA | $6.50|10 or more: 5% off; 50 or more: 10% off. | |||||||
| W72 | Nickel Wire | |||||||||||
| 0.031 | 0.79 | 0.00140 | 48 hours*Standard lead time for wire is 48 hours. | Foot | $7.90 | |||||||
| W74 | Nickel Wire | |||||||||||
| 0.040 | 1.00 | 0.000328 | 48 hours*Standard lead time for wire is 48 hours. | Foot | $8.90|10 or more: 5% off; 50 or more: 10% off. | |||||||
| W87 | Nickel Wire | |||||||||||
| 0.050 | 1.27 | 0.00020 | 48 hours*Standard lead time for wire is 48 hours. | Foot | $10.75 | |||||||
| Nickel Ribbon (99.8% Purity) | ||||||||||||
| Part No. | (ohms/cm) | Thickness (in) | Width (in) | Thickness (mm) | Width (mm) | Stock/ Lead Time |
UOM | Price | Order | |||
| W83 | Nickel Ribbon | |||||||||||
| 0.06000 | 0.001 | 0.018 | 0.030 | 0.46 | 0†Standard lead-time for non-stock items is approximately two weeks depending on the item. | Foot | $9.00 | |||||
| W77 | Nickel Ribbon | |||||||||||
| 0.03600 | 0.001 | 0.030 | 0.030 | 0.76 | 0†Standard lead-time for non-stock items is approximately two weeks depending on the item. | Foot | $9.80 | |||||
| W78 | Nickel Ribbon | |||||||||||
| 0.01800 | 0.001 | 0.060 | 0.025 | 1.52 | 0†Standard lead-time for non-stock items is approximately two weeks depending on the item. | Foot | $10.00|10 or more: 5% off; 50 or more: 10% off. | |||||
| W80 | Nickel Ribbon | |||||||||||
| 0.00860 | 0.001 | 0.125 | 0.025 | 3.18 | 0†Standard lead-time for non-stock items is approximately two weeks depending on the item. | Foot | $10.00|10 or more: 5% off; 50 or more: 10% off. | |||||
| W79 | Nickel Ribbon | |||||||||||
| 0.02625 | 0.002 | 0.030 | 0.050 | 0.76 | 0†Standard lead-time for non-stock items is approximately two weeks depending on the item. | Foot | $10.00|10 or more: 5% off; 50 or more: 10% off. | |||||
| W82 | Nickel Ribbon | |||||||||||
| 0.00184 | 0.005 | 0.115 | 0.127 | 2.92 | DISCONTINUED | Foot | --- | --- | ||||
| W85 | Nickel Ribbon | |||||||||||
| 0.00150 | 0.005 | 0.140 | 0.130 | 3.56 | 0§Lead time for this non-stock item is approximately 28 days. | Foot | $11.00 | |||||
| W76 | Nickel Ribbon | |||||||||||
| 0.01312 | 0.005 | 0.030 | 0.130 | 0.76 | DISCONTINUED | Foot | --- | --- | ||||
| W81 | Nickel Ribbon | |||||||||||
| 0.01270 | 0.005 | 0.031 | 0.130 | 0.79 | 0§Lead time for this non-stock item is approximately 28 days. | Foot | $11.00 | |||||
| W84 | Nickel Ribbon | |||||||||||
| 0.00042 | 0.010 | 0.250 | 0.254 | 6.35 | DISCONTINUED | Foot | --- | --- | ||||
| | Quantity discount 10 or more: 5% off; 50 or more: 10% off. | ||||||||||||
|
* Standard lead time for wire is 48 hours. † Standard lead-time for non-stock items is approximately two weeks depending on the item. ‡ Call for availability. § Lead time for this non-stock item is approximately 28 days. | ||||||||||||
Ordering information.
International (non-US) prices available through your
local dealer.
|
||||||||||||
- Wire Material for Scientific Applications A wide range of resistance type wires and precious metals for the repair and manufacture of filaments and heaters for mass spectrometers, SEM's and scientific instruments.
MS Heaters and Temperature Sensors Replacement heaters and temperature sensors for your mass spectrometer.
Heat Coils Standard size coils are used on several mass spectrometer heaters repaired by S.I.S.
Platinum Resistance Thermometer Elements These PRT elements can be used with precision laboratory and industrial instruments.
Molybdenum Wire and Ribbon Molybdenum wire is used in a broad range of applications in many industries. Mandrels for making tungsten filaments along with leads, filament supports, and seals are among a few.
Tungsten Wire, Ribbon, Filament Wire for Electron Emitters, Heater Wire Buy tungsten wire, ribbon for mass spectrometer heaters here. Choose from varying thickness, Tungsten filament wire sold by the foot.