Agilent/HP 5971 Bayard Alpert Vacuum Measurement System (This Page)
Hover over image to zoom
Description
The vacuum measurement system to monitor the source pressure is
optional for the 5971. A complete system is available from S.I.S. to
measure the source pressure. The system consists of a model 330 ion
gauge controller, an ion gauge adaptor, a G75K ion gauge tube and a
cable. This Bayard Alpert style vacuum gauge tube and controller is an
exact replacement for the optional system available from Agilent The
adaptor is inserted between the NW25 flange at the bottom of the
analyzer and the calibration gas vial.
Santovac 5P Ultra has the same properties of Santovac 5 but guarantees minimal amounts of the 3 and 4 ring polyphenyl ethers; less than .02% and .1% respectively and for ultra-clean applications such as
mass spectrometry.
Get a DeTech 2300 Electron Multiplier here.
Used in Agilent 5975 MSD (without TAD)/5973/5972/5971/5970/1100 LC-MSD mass spectrometers and backed by a 100% no-nonsense warranty. Developed by Detector Technology, Inc.
This new design eliminates any Inlet metal contact with the sample, the capillary column protrudes slightly through the end of the tip directly into the source.
Santovac 5P Ultra has the same properties of Santovac 5 but guarantees minimal amounts of the 3 and 4 ring polyphenyl ethers; less than .02% and .1% respectively and for ultra-clean applications such as
mass spectrometry.
Get a DeTech 2300 Electron Multiplier here.
Used in Agilent 5975 MSD (without TAD)/5973/5972/5971/5970/1100 LC-MSD mass spectrometers and backed by a 100% no-nonsense warranty. Developed by Detector Technology, Inc.
This new design eliminates any Inlet metal contact with the sample, the capillary column protrudes slightly through the end of the tip directly into the source.
Santovac 5P Ultra has the same properties of Santovac 5 but guarantees minimal amounts of the 3 and 4 ring polyphenyl ethers; less than .02% and .1% respectively and for ultra-clean applications such as
mass spectrometry.