Description
![Transfer Line Tip](../../art/hp/154-3.gif)
The transfer line tip for the H.P. 5971 MSD has been redesigned to permit the effluent from the end of the capillary column to purge directly into the MSD source, unlike the original gold plated transfer line tip in which the effluent purged inside this fitting and was diverted through side vents. This new design eliminates any Inlet metal contact with the sample, the capillary column protrudes slightly through the end of the tip directly into the source. This new design should result in higher sensitivity for compounds which are sensitive to any metal contact.
Part No. | Description | Price EA |
Order |
---|---|---|---|
HP99 | HP 5971 Transfer Line Tip | $115.00 | |
![]() |
![Electron Multipliers, DeTech 2300 Multipliers for Agilent 5975/5973/597X/1100](/i/art/detech/2300.jpg)
Get a DeTech 2300 Electron Multiplier here.
Used in Agilent 5975 MSD (without TAD)/5973/5972/5971/5970/1100 LC-MSD mass spectrometers and backed by a 100% no-nonsense warranty. Developed by Detector Technology, Inc.
![Santovac 5P Ultra and polyphenyl ether vacuum pump fluid](/i/vacuum/sis/5p-ultra.jpg)
Santovac 5P Ultra has the same properties of Santovac 5 but guarantees minimal amounts of the 3 and 4 ring polyphenyl ethers; less than .02% and .1% respectively and for ultra-clean applications such as
mass spectrometry.
![Inland 45 Mechanical Pump Oil](/i/vacuum/sis/inland-45.jpg)
Inland 45 is the highest quality rough pump oil you can use for your mass spectrometer.
![Ion Gauge Tubes, Bayard-Alpert Type](/i/vacuum/sis/g75k.jpg)
Bayard-Alpert Design and Dual Tungsten or Burn-out Resistant Iridium
![Baseplate O-Ring for 5973/5975/5977](/i/vacuum/o-rings/viton-brown.jpg)
Large brown viton o-ring.
![Micro-mesh Polishing/File Board](/i/art/part/buffer_3_way.jpg)
Micro-Mesh® Boards