Features
Fomblin® vacuum pump fluids are non-flammable, chemically inert and thermally stable. When used with proper pump filtration, Fomblin® PFPE fluids provide exceptionally long service life. These fluids have excellent lubricity properties and are available in viscosity grades suitable for use in all vacuum pumps. Other container sizes and grades are available on special request.
- Non-Flammable
- Safe for Oxygen Service
- Resists Attack by Corrosive Gasses
- Low Vapor Pressure
- Extended Service Life
Hewlett Packard Krytox (#6040-0730)
Specs
| Vapor Pressure @ 20 °C: | 4 x 10-8 torr |
|---|---|
| Viscosity @ 20 °C (cst): | 276 |
| Viscosity @ 100 °C (cst): | 10 |
| Pour Point: | -35 °C |
| Flash Point: | None |
| Fire Point: | None |
| Boiling Range: | >250 °C |
| Density: | 1.90 g/mL |
SDS
SIS HPLC Backpressure Regulators Chromatography Tools
Tungsten Wire, Ribbon, Filament Wire for Electron Emitters, Heater Wire Buy tungsten wire, ribbon for mass spectrometer heaters here. Choose from varying thickness, Tungsten filament wire sold by the foot.
Fomblin® Inert PFPE Vacuum Pump Fluids Y16/6 Fomblin® vacuum pump fluids are non-flammable, chemically inert and thermally stable.
Inland 45 Mechanical Pump Oil Inland 45 is the highest quality rough pump oil you can use for your mass spectrometer.
Ion gauge adaptor flange Use this to adapt ion gauge tubes to a 2 3/4" Conflat flange.
Inland® 19 Rough Pump Oil Inland rough pump oil is ideal for use in all models of vacuum pumps including Adixen, Edwards, and Welch.
Ion Gauge Tubes, Bayard-Alpert Type Bayard-Alpert Design and Dual Tungsten or Burn-out Resistant Iridium
Santovac 5 polyphenyl ether vacuum pump fluid Santovac 5 is the industry standard oil for diffusion
pump.






