Home
- ▶
- Heaters/Source
- ▶
- Agilent Heaters and SensorsMass Spectrometry, Scientific Supplies & ManufacturingScientific Instrument Services 5973 Source Heater Tamper Resistant Allen Wrench 5973/5975 Quad Sensor 5985 Source Heater Assembly 5971 Interface Heater
- ▶
- Probes
- ▶
- Probes for Agilent Mass Spectrometers
- ▶
- Probe Port Part (This Page)
Hover over image to zoom
Description
SS4P4T Pump Out Valve and HP12 Probe Inlet Seal
S.I.S. can now supply a wide variety of parts for the H.P. Engine in addition to the parts listed in our catalog. The following parts replacement for the H.P. Probe Inlet System are available.
| Part No. | Material | Nominal ID (in) | Nominal Width (in) | Actual ID (in) | Actual Width (in) | VG # | HP # | Quantity In Stock |
Price EA |
Order | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| V320 | O-Ring | ||||||||||
| Viton(R) | 1 1/8 | 3/16 | 1.100 | 0.21 | --- | --- | 0*Standard lead-time for non-stock items is approximately two weeks depending on the item. | Contact Us | |||
| V211 | O-Ring | ||||||||||
| Viton(R) | 13/16 | 1/8 | 0.796 | 0.139 | --- | --- | INACTIVE | --- | --- | ||
| V113 | O-Ring | ||||||||||
| Viton(R) | 9/16 | 3/32 | 0.549 | 0.103 | 5711015 | --- | 0*Standard lead-time for non-stock items is approximately two weeks depending on the item. | Contact Us | |||
| L25 | Apiezon L Grease, 25 gram tube | ||||||||||
| --- | --- | --- | --- | --- | --- | 6040-0289 | 0*Standard lead-time for non-stock items is approximately two weeks depending on the item. | $259.08 | |||
|
* Standard lead-time for non-stock items is approximately two weeks depending on the item. † Contact us for availability. | |||||||||||
Ordering information.
International (non-US) prices available through your
local dealer.
|
|||||||||||
| Part No. | For NW Flange | For Hose ID (in) | A (mm) | B (mm) | C (mm) | HP # | Price EA |
Order | |
|---|---|---|---|---|---|---|---|---|---|
| NS25025 | Long Nipples-Aluminum | ||||||||
| 25 | 1/4 | 35 | 6.35 | 40 | 05989-20724 | $51.50 | |||
|
Ordering information.
International (non-US) prices available through your
local dealer.
|
|||||||||
Viton® is a registered trademark of DuPont Dow Elastomers
Viton® Composition O-Rings O-Rings are available in five different materials from Scientific Instrument Services.
Replacement O-Ring Replacement or spare O-rings for centering rings.
Wing-Nut Aluminum Clamp Industry standard die-cast aluminum clamp.
Stainless Steel Oil Mist Eliminator Hermetic, Sealed, In-line Oil Mist Separator For Mechanical Vacuum Pumps.
Centering Ring Assembly, 304 Stainless and Aluminum Available with Viton® or Buna O-ring, this centering ring complete with O-ring should be used when joining any two NW flanges with a quick flange clamp.
Inland 45 Mechanical Pump Oil Inland 45 is the highest quality rough pump oil you can use for your mass spectrometer.
Apiezon® T Greases All stopcocks and movable joints in a high vacuum system must be satisfactorily lubricated, yet leak proof.
Quick Flange Clamp, Aluminum and Stainless Quick action aluminum clamp with finger closure "T" knob for positive sealing of NW flanges.