- MSAgilent Bruker Extrel JEOL Kratos Perkin Elmer SCIEX Shimadzu Thermo Varian Waters (Micromass/VG) FLIR/Griffin Inficon/Leybold/Balzers MKS/UTI Hiden Dupont/CEC Nermag Vestec Filaments Heaters/Sensors Wire Material Electron Multipliers Probe/Sample Vials Ion Transfer Tubes Calibration Compounds MALDI-TOF Supplies Ceramic Insulators Cleaning Supplies Other Filament Repair Source Cleaning Transfer Line Repair GC Injection Port Repair Vacuum Feedthru Repair Other Repair Services NIST MS Library Wiley MS Libraries SIMION® 8.1 Catalog Page A1 Catalog Page B1
- AgilentAgilent/HP part number cross reference 5977 5975 5973 5972 5971 5970 MSD GCD 5992/5993/5995 5985/5986/5987/5988 5989 7000 4500 6100 6200 6300 6400 6500 7500 Filaments Multipliers Source Heaters & Sensors Vacuum Transfer Line Supplies Probes Baseplate O-Ring for 5973/5975/5977 Ceramic Insulators ESI/Jet Separator Tools Autosampler GC Supplies Other Supplies Mass Spectral Libraries (NIST 17 and Wiley Libraries) All Repairs Filament Repair Source Cleaning DIP Probe Entrance Lens Feedthru Repair of Flanges Feedthru Repair - 5971 Interface Repair - 5971 Injection Port Inject. Port MSD Catalog Page A43 Catalog Page B14
- 5972 (This Page)
SIS provides various supplies and services for the 5972.
New - High Sensitivity Electron Multiplier - Galileo Model 5778 - When every ion counts in GC-MSD and you demand minimum instrument down time, insist on Galileo's new Model 5778 Channeltron electron multiplier.
Replacement Parts for the Agilent/HP 5972
- Electron Multipliers for the Agilent/HP 5972 SIS provides replacement detectors for your Agilent 5972 mass spectrometer. Multipliers are from the major manufacturers of electron multipliers.
- Autosampler Vials Vials are manufactured from Type 1 borosilicate glass tubing to hold uniform wall thickness.
- Brass Nut Available in packages of 5 nuts.
- Ion Gauge Tubes Our standard G75K Bayard-Alpert ion gauge tube will fit all models of HP mass specs except the HP5989 MS Engine.
- Syringes, Autosampler A comprehensive range of syringes for GC autosamplers is available.
- NW50 plastic Viton® CO-SEAL
- Agilent GC Injection Port Repair The SS line can become clogged, broken or the joint can leak, but SIS can repair them!
- MS Calibration Compounds Calibration compounds with a mass range for many uses and needs.
- Mass Spec Source Cleaning Service at SIS Expert cleaning & repair of mass spectrometer sources.
- The NIST 17 Mass Spectral Library
& Search Software (NIST 2017/2014/EPA/NIH)Get new licenses for NIST mass spectral library, EI MS spectra, MS/MS, GC data here. Includes electron ionization (EI) data, AMDIS software. Standard, Agilent, Shimadzu, Multiformat available.
- Mass Spectral Libraries
(NIST 17 and Wiley Libraries)Identify unknowns from EI (GC/MS) and MS/MS spectra. The most trusted, largest, and widely used libraries.
- GC Columns SGE GC capillary columns from a pioneer in the field.
- GC Injection Port Liners Glass and quartz GC injection port liners.
- GC Septa by Manufacturer GC septa by SGE and other manufactures.
- SIS GC Cryo-Traps Cryo-cooling and heating trap for the cryo-focusing of volatiles and semivolatiles at the head of GC capillary columns.
- GC Ferrules GC ferrules by SGE and other manufacturers. Graphite Vespel®, graphitized vespel and PTFE ferrules.
(GC)A complete line of SGE syringes for GC.
- Analytical Standards 8DS001 : ,8IS001 : ,8IS00110 : ,8IS002 : ,8IS003 : ,8IS005 : ,8IS006 : ,8IS008 : ,8IS00810 : ,8IS010 : ,8LS004 : ,8LS007 : ,8PK005 : ,8PK006 : ,8PM001 : ,8PM002 : ,8PM003 : ,8PM004 : ,8PM005 : ,8PM006 : ,8PM007 : ,8PM008 : ,8PM009 : ,8SI001 : ,8SI002 : ,8SI00210 : ,8SI003 : ,8SI00310 : ,8SI004 : ,8SI00410 : ,8SM00110 : ,8SM002 : ,8SM00310 : ,8SM004 : ,8SM005 : ,8SM006 : ,8SM007 : ,8SM008 : ,8SM009 : ,8SM009CON : ,8SM010D : ,8SM010IPA : ,8SS001 : ,8SS00110 : ,8SS002 : ,8SS003 : ,8SS004 : ,8SS005 ...
- SIS Short Path Thermal Desorption Systems Short Path Thermal Desorption Systems for the analysis of volatiles and semi-volatiles by GC and GC/MS. Systems, accessories, and application notes.
- Foreline Gauge Assembly for Agilent Replaces Agilent/HP Part #G1099-60545.
- Vacuum Pumps and Supplies from SIS Vacuum pumps by SIS, Edwards, Adixen and Pfeiffer.
- SIS All-In-One Pump Filter Kit for Pfeiffer 6.25" high, low cost, combined oil mist eliminator and charcoal filter proven effective for removing volatile and semi-volatile organics from exhaust of vacuum pumps.
- Santovac® 5P Ultra Vacuum Pump Fluid Santovac 5P Ultra has the same properties of Santovac 5 but guarantees minimal amounts of the 3 and 4 ring polyphenyl ethers; less than .02% and .1% respectively and for ultra-clean applications such as mass spectrometry.
- Mechanical Pump Oils Mechanical Pump Oils for your vacuum rough pump needs.
- Diffusion Pump Fluids Pump Fluids for your lab needs.
- Convectron Series 275 Vacuum Gauge The Granville Philips Convectron Gauge tube used on the 5971 and 5972 mass spectrometers is available from S.I.S. This is a direct replacement for the HP original and screws into the fitting shown above.
- Rollerflex Vacuum Hose PVC cord reinforced vacuum hose. Light weight, low cost, and superior corrosion resistance. Ideal for mass spec, food, and other applications.
- Vacuum Hose: Steel Wire Reinforced This food and beverage grade, crystal clear PVC tubing is reinforced with 110 ton psi steel spring wire.
- Vacuum Fittings Many Fittings and Flanges in different sizes for your vacuum needs.
Repair Services for the Agilent/HP 5972
- Entrance Lens Repair, 5970 The spotwelds holding the two parts together can break loose.
- Feedthru Repair, 5971 These feedthrus are very fragile and susceptible to damage, but no worries, SIS can repair them!
- Feedthru Repair, HP TIG vacuum welding a new feedthru in place and leak testing the feedthru for vacuum sealing.
- Flange Repair TIG vacuum welding a new feedthru in place and leak testing the feedthru for vacuum sealing.
- Filament Repair We will completely clean the assembly and replace the rhenium filament wire.
- Filament Repair, 5971 We will completely clean the assembly and replace the rhenium filament wire.
- Injection Port Repair The SS line can become clogged, broken or the joint can leak, but SIS can repair them!
- Injection Port Repair, MSD Broken or clogged tubes can be replaced!
- Interface Repair, 5971 The GC/MS interface on the Agilent 5971 MSD can be repaired!
- Source Cleaning, 5972 Cleaning and polishing of all metal parts are followed by thorough washing and bake out in an oven.