Beware of recent phishing e-mails. Use our official contact addresses only.
413-284-9975
Adaptas

Thermo 4500/4600/TSQ Source Heaters

Thermo 4500/4600/TSQ Source Heaters
Hover over image to zoom
Price: 0
Product ID : HT4500
HT4500 Options=4500/4600/TSQ Heater Assembly, #40005-60270 HT7000 Options=Heater Assembly for Thermo TSQ-70

Description

The source heater for the Thermo 4500/4600, Thermo #40005-60270, includes 4 cartridge heaters, ceramic insulators, leads and connectors.

SIS also repairs these heater assemblies - Part # REP46.

Individual cartridges, SC181, are also available for those who want to repair these heaters themselves.

Related Products
Popular Items also Purchased
  • Thermo TSQ®70/700 PRTThermo TSQ®70/700 PRT
    Temperature sensor for your TSQ mass spec.
  • Thermo 4500 PRTThermo 4500 PRT
    This EI/CI Source Temperature Sensor (PRT2) includes the 100 ohm platinum resistance thermometer, leads, ceramic insulator, and connectors.
  • Thermo/Finnigan Source and Transfer Line HeatersThermo/Finnigan Source and Transfer Line Heaters
    Heater cartridge No. SC2515 is used in the Finnigan 4000 source.
  • Thermo/Finnigan TSQ®70, 700 Source HeaterThermo/Finnigan TSQ®70, 700 Source Heater
    The heater source for the Finnigan TSQ70, 700 includes 4 cartridge heaters, ceramic insulators, leads and connectors.
  • Inland 45 Mechanical Pump OilInland 45 Mechanical Pump Oil
    Inland 45 is the highest quality rough pump oil you can use for your mass spectrometer.
  • Ion Gauge Tubes, Bayard-Alpert TypeIon Gauge Tubes, Bayard-Alpert Type
    Bayard-Alpert Design and Dual Tungsten or Burn-out Resistant Iridium
  • Spun Fiberglass Cleaning BrushesSpun Fiberglass Cleaning Brushes
    Fiberglass brushes are manufactured from spun glass in two grades of material - coarse and fine.
  • Purge and Trap Stainless Steel Purge HeadsPurge and Trap Stainless Steel Purge Heads
    The top fitting of both purge heads consists of a 1/16" fitting for the attachment of the sparging needle followed by needle adaptor to seal the needle in place and provide for the attachment of the purging gas line.
  • Thermal Desorption Sample LoaderThermal Desorption Sample Loader
    This device is used to inject or load liquid samples directly into the S.I.S. Thermal Desorption Tubes, forcing the syringe contents onto the adsorbent resins in the desorption tube without any loss of sample due to back evaporation.
  • Short Path Thermal Desorption Accessories Supply KitShort Path Thermal Desorption Accessories Supply Kit
    When ordering the Short Path Thermal Desorption System, a wide range of systems and accessories are available depending on the application requirements of the user.
  • Seals for SIS Thermal Desorption TubesSeals for SIS Thermal Desorption Tubes
    Seals are utilized in a variety of locations in the Short Path Thermal Desorption Unit.