Home
- ▶
- Heaters/Source
- ▶
- Agilent Heaters and SensorsMass Spectrometry, Scientific Supplies & ManufacturingScientific Instrument Services 5973 Source Heater Tamper Resistant Allen Wrench 5973/5975 Quad Sensor 5985 Source Heater Assembly Agilent Interface Heater Assembly 5971 Interface Heater
- ▶
- Thermo Heaters and SensorsThermo 4500/4600/TSQ Source Heater Thermo 5100 Source Heater Thermo Incos 50/50B/500, XL Heater Cartridge - SC1812 Thermo 4000 Source Heater Cartridge Thermo ITD Cartridge Heater Thermo MAT 4000 PRT Thermo 4500 PRT Thermo MAT 5100 PRT Thermo TSQ70 PRT Thermo Incos 50 Heater Cartridge PRT Themo Incos 50B and XL PRT Thermo 8200 PRT
- ▶
- Themo Incos 50B and XL PRT (This Page)
Hover over image to zoom
Price: 165
Product ID : PRT6
PRT6 PRT for Thermo Incos 500, 50B, Thermo #=55000-60085
Description
The platinum resistance thermometers for temperature sensing in the source of the Thermo Incos 50B, Incos 500 and Incos XL are available. This is a direct replacement for Thermo #55000-60085. It is complete with connectors.
This is the standard Incos 50B and XL temperature sensor.
Thermo MS Filaments Replacement filaments for your Thermo mass spectrometer
Mass Spectrometry - Thermo/Finnigan SIS supplies new parts or repairs old parts on your Thermo/Finnigan instrument.
Thermo Incos 50, 50B, XL and 500 Source Heaters This 8 watt, 24 volt source heater cartridge for the Finnigan MAT Incos 50 Source measures 3/16 inch in diameter by 1.0 inch long.
Ceramic Washer Insulators A wide variety of alumina ceramic washers.
Ceramic Insulators for Thermo The following alumina insulators are currently available for the Thermo instruments.
Ceramic Insulators for Thermo/Finnigan Incos Mass Spec Alumina ceramics for the Incos 50 Source.
Micro-Mesh® Regular Sheets Micro-Mesh® Regular Sheets
Inland® 19 Rough Pump Oil Inland rough pump oil is ideal for use in all models of vacuum pumps including Adixen, Edwards, and Welch.
Ferrules for Varian Saturn Ion Trap Mass Spec The 1/4" graphitzed Vespel® ferrule with a .5mm and a .4mm hole.
Ferrules for Thermo/Finnigan Ion Trap 0.4 and 0.5 mm 1/4" graphitzed Vespel® ferrules with a 0.4mm or a 0.5mm hole