Price: 218.55
Product ID : IN705
IN7051 Size=1 gallon Bottle Invoil 705 IN705 Size=500 cc bottle Invoil 705
Description
Invoil 705 silicone diffusion pump fluid is a single component fluid designed for ultra high vacuum systems in the 10-7 to 10-9 torr range. With the use of traps, Invoil 705 is capable of attaining a pressure of 10-11 torr. The low vapor pressure, low backstreaming rate and the high resistance to oxidation and radiation make this diffusion pump fluid ideal for many ultra high vacuum applications such as those in mass spectrometers and electron microscopes.
Features
- Ultra High Vacuum Applications
- Extremely Low Vapor Pressure Capabilities
- Little or No Backstreaming
- Identical to Dow Corning 705
Specs
Vapor Pressure @ 25 °C: | 2.4 x 10-9 torr |
---|---|
Boiling Point @ .50 torr: | 250 °C (482 °F) |
Viscosity @ 40 °C: | 66 cst (306 SUS) |
Viscosity @100 °C: | 9.8 cst (58.4 SUS) |
Pour Point: | <0 °C (<32 °F) |
Flash Point: | 243 °C (470 °F) |
Fire Point: | None |
Density: | 1.09 gm/cc |
SDS

Inland rough pump oil is ideal for use in all models of vacuum pumps including Adixen, Edwards, and Welch.

Inland TW mechanical pump fluid is specifically recommended for applications where exposure to reactive or corrosive gases is prevalent.

The below listed vacuum flange copper gaskets are made from OFHC copper.

Copper used.

All gaskets are .080" thick.

The following copper and gold plated copper gaskets are available
for the vacuum flanges on Thermo/Finnigan mass spectrometers.

Micro-Mesh® Regular Rolls

Micro-Mesh® Regular Sheets

Inland rough pump oil is ideal for use in all models of vacuum pumps including Adixen, Edwards, and Welch.

Invoil 704 is a single component silicone diffusion pump fluid for high vacuums 10-6 to 10-8 torr range.