Catalog A31
Home
- ▶
- Heaters/Source
- ▶
- Agilent Heaters and SensorsMass Spectrometry, Scientific Supplies & ManufacturingScientific Instrument Services 5973 Source Heater Tamper Resistant Allen Wrench 5973/5975 Quad Sensor 5985 Source Heater Assembly Agilent Interface Heater Assembly 5971 Interface Heater
- ▶
- WireAlumel (95% Al/5% NI) Chromalloy O Chromel (90% NI/10% CR) Constantan (55% CU/45%NI) Copper (OFHC) Gold Inconel 600 Inconel X750 Iridium Iron Kovar 50%Moly/50% Rhenium Molybdenium Nichrome (80% NI/20% CR) Nickel NI52 Alloy (50% NI/50% FE) Platinum Rhenium Rhenium / Tungsten Rhodium / Platinum Silver Stainless Steel Type 302 & 304 Tantalum 90% Tantalum / 10% Tungsten Tungsten NEW - SISAlloy™ (Yttria/Rhenium Alloy) Heater Coils
- ▶
- Inconel 600 (This Page)
Description
Inconel 600 Wire (Nickel/Chromium). Inconel wire is a nickel-chromium alloy wire for applications requiring good resistance to oxidation and corrosion at high temperatures.
| Part No. | Diameter (in) | Diameter (mm) | (ohms/cm) | Price EA |
Order |
|---|---|---|---|---|---|
| W175 | 0.020 | 0.50 | 0.04991 | $17.00†10 or more: 5% off; 50 or more: 10% off. | |
| † Quantity discount 10 or more: 5% off; 50 or more: 10% off. | |||||
| * Lead time for this non-stock item is approximately 48 hours. | |||||
Ordering information.
International (non-US) prices available through your
local dealer.
|
|||||
- Wire Material for Scientific Applications A wide range of resistance type wires and precious metals for the repair and manufacture of filaments and heaters for mass spectrometers, SEM's and scientific instruments.
MS Heaters and Temperature Sensors Replacement heaters and temperature sensors for your mass spectrometer.
Heat Coils Standard size coils are used on several mass spectrometer heaters repaired by S.I.S.
Platinum Resistance Thermometer Elements These PRT elements can be used with precision laboratory and industrial instruments.
Copper Filament & Heater Material Copper wire has an extremely high electrical conductivity making it highly suitable for electrical connections and thermal conductivity applications.
Stainless Steel Wires and Ribbons Stainless Steel wire does not stain, corrode or rust easily as ordinary steel wire.
Alumel - Filament & Heater Wire Material Alumel is a nickel/aluminum magnetic alloy used in the production of thermocouples and thermocouple extension wires.
Inconel X750 Wire Inconel wire is a nickel-chromium alloy wire for applications requiring good resistance to oxidation and corrosion at high temperatures.
Tantalum Wire and Ribbon - Filament and Heater Material Tantalum Wire and Ribbon is corrosion resistant and has good thermal conductivity. Some of its uses is in the manufacture of heating elements, vacuum tubes and other high temperature parts
Nickel Wire and Ribbon - Filament and Heater Material Nickel wire provides good corrosion resistance. It is most suitable for use in electronic components, temperature sensors, electrical resistance thermometers and other electrical applications.
Constantan Filament & Heater Material Constantan is a copper/nickel alloy used in the production of thermocouples and thermocouple extension wires as well as precision resistors and low temperature resistance heating applications.
SIS Replacement Elements For Edwards Oil and Odor Filters - EMF10 SIS Replacement Elements For Edwards Oil and Odor Filters at a low cost.
Parts for BOC Edwards Vacuum Pumps (by Precision Plus)
19201007 : OEM=Edwards,Part Type=Valves,Description=Valve Piston,Pump Models=E1M40;E2M40,20404011 : OEM=Edwards,Part Type=Bearings,Description=Roller Bearing EM40,Pump Models=E1M40;E2M28;E2M30;E2M40,25904601 : OEM=Edwards,Part Type=Misc,Description=Ballast Valve E1M80,Pump Models=E1M40;E2M40,29201006 : OEM=Edwards,Part Type=Sight Glasses,Description=Sight Glass E1M80,Pump Models=E1M40;E1M80;E2M40;E2M80,00307046 : OEM=Edwards,Part Type=Springs,Description=SPRING,Pump Models=E1M18;E2M18,00714012 :...