Catalog A31
Home
- ▶
- Heaters/Source
- ▶
- Agilent Heaters and SensorsMass Spectrometry, Scientific Supplies & ManufacturingScientific Instrument Services 5973 Source Heater Tamper Resistant Allen Wrench 5973/5975 Quad Sensor 5985 Source Heater Assembly Agilent Interface Heater Assembly 5971 Interface Heater
- ▶
- WireAlumel (95% Al/5% NI) Chromalloy O Chromel (90% NI/10% CR) Constantan (55% CU/45%NI) Copper (OFHC) Gold Inconel 600 Inconel X750 Iridium Iron Kovar 50%Moly/50% Rhenium Molybdenium Nichrome (80% NI/20% CR) Nickel NI52 Alloy (50% NI/50% FE) Platinum Rhenium Rhenium / Tungsten Rhodium / Platinum Silver Stainless Steel Type 302 & 304 Tantalum 90% Tantalum / 10% Tungsten Tungsten NEW - SISAlloy™ (Yttria/Rhenium Alloy) Heater Coils
- ▶
- 50%Moly/50% Rhenium (This Page)
Description
Moly/Rhenium Wire.
| 50% Moly/50% Rhenium Wire | ||||||
| Part No. | Diameter (in) | Diameter (mm) | (ohms/cm) | Stock/ Lead Time |
Price EA |
Order |
|---|---|---|---|---|---|---|
| W455 | 0.005 | 0.13 | 0.01540 | DISCONTINUED | ---‡10 or more: 5% off; 50 or more: 10% off. | --- |
| W295 | 0.030 | 0.76 | 0.00656 | 48 hours†Standard lead time for wire is 48 hours. | $90.00‡10 or more: 5% off; 50 or more: 10% off. | |
| ‡ Quantity discount 10 or more: 5% off; 50 or more: 10% off. | ||||||
|
* Call for availability. † Standard lead time for wire is 48 hours. | ||||||
Ordering information.
International (non-US) prices available through your
local dealer.
|
||||||
- Wire Material for Scientific Applications A wide range of resistance type wires and precious metals for the repair and manufacture of filaments and heaters for mass spectrometers, SEM's and scientific instruments.
MS Heaters and Temperature Sensors Replacement heaters and temperature sensors for your mass spectrometer.
Heat Coils Standard size coils are used on several mass spectrometer heaters repaired by S.I.S.
Platinum Resistance Thermometer Elements These PRT elements can be used with precision laboratory and industrial instruments.
Rhenium/Tungsten Wire and Ribbon Rhenium/Tungsten Wire and Ribbon is used in the manufacture of mass spectrometer filaments and heater coil as well as in the manufacture of thermocouples.
Molybdenum Wire and Ribbon Molybdenum wire is used in a broad range of applications in many industries. Mandrels for making tungsten filaments along with leads, filament supports, and seals are among a few.
Tantalum Wire and Ribbon - Filament and Heater Material Tantalum Wire and Ribbon is corrosion resistant and has good thermal conductivity. Some of its uses is in the manufacture of heating elements, vacuum tubes and other high temperature parts
Tungsten Wire, Ribbon, Filament Wire for Electron Emitters, Heater Wire Buy tungsten wire, ribbon for mass spectrometer heaters here. Choose from varying thickness, Tungsten filament wire sold by the foot.