Catalog A31
Home
- ▶
- Heaters/Source
- ▶
- Agilent Heaters and SensorsMass Spectrometry, Scientific Supplies & ManufacturingScientific Instrument Services 5973 Source Heater Tamper Resistant Allen Wrench 5973/5975 Quad Sensor 5985 Source Heater Assembly Agilent Interface Heater Assembly 5971 Interface Heater
- ▶
- WireAlumel (95% Al/5% NI) Chromalloy O Chromel (90% NI/10% CR) Constantan (55% CU/45%NI) Copper (OFHC) Gold Inconel 600 Inconel X750 Iridium Iron Kovar 50%Moly/50% Rhenium Molybdenium Nichrome (80% NI/20% CR) Nickel NI52 Alloy (50% NI/50% FE) Platinum Rhenium Rhenium / Tungsten Rhodium / Platinum Silver Stainless Steel Type 302 & 304 Tantalum 90% Tantalum / 10% Tungsten Tungsten NEW - SISAlloy™ (Yttria/Rhenium Alloy) Heater Coils
- ▶
- Inconel X750 (This Page)
Description
Inconel X750 Wire (Nickel/Chromium). Inconel wire is a nickel-chromium alloy wire for applications requiring good resistance to oxidation and corrosion at high temperatures.
| Part No. | Diameter (in) | Diameter (mm) | (ohms/cm) | Price EA |
Order |
|---|---|---|---|---|---|
| W180 | 0.020 | 0.50 | 0.04991 | $17.00 | |
| * Lead time for this non-stock item is approximately 48 hours. | |||||
Ordering information.
International (non-US) prices available through your
local dealer.
|
|||||
- Wire Material for Scientific Applications A wide range of resistance type wires and precious metals for the repair and manufacture of filaments and heaters for mass spectrometers, SEM's and scientific instruments.
MS Heaters and Temperature Sensors Replacement heaters and temperature sensors for your mass spectrometer.
Heat Coils Standard size coils are used on several mass spectrometer heaters repaired by S.I.S.
Platinum Resistance Thermometer Elements These PRT elements can be used with precision laboratory and industrial instruments.
Two Hole Round Ceramic Tube Insulators The following two hole alumina ceramic tube type insulators are available in six inch lengths.
Chromel (90% NI/10% CR) Filament Materials Chromel is a nickel/chromium alloy used in the production of thermocouples and thermocouple extension wires.
Nichrome Wire, Nickel Chromium Ribbon, Non-Magnetic Alloy for Heating Elements Buy Nichrome Wire, Non Magnetic Ribbon for mass spectrometer heaters here. Choose from varying thickness, Nichrome filament wire sold by the foot.
Tantalum/Tungsten Wire and Ribbon - Filament and Heater Material Tantalum/Tungsten Wire and Ribbon has excellent corrosion resistance and is used in the manufacture of heating elements.
Constantan Filament & Heater Material Constantan is a copper/nickel alloy used in the production of thermocouples and thermocouple extension wires as well as precision resistors and low temperature resistance heating applications.
Platinum Wire and Ribbon Platinum Wire is used in many applications including gasket or o-ring fabrication, thermocouples, electrical contacts, and heater coils.
Platinum Wire and Ribbon for CDS Pyroprobe For those users who have their own spotwelder, we offer the platinum wire and ribbon from which you can make your own heater coils or ribbons for the CDS pyroprobe. W214 : -,W215 : -
Chromalloy O - Filament and Heater Material Chromalloy O wire is an alloy wire used at operating temperatures up to 1200°C. Its chemical composition gives good oxidation resistance especially under conditions of frequent switching or wide temperature fluctuations.
Applications include heating elements in both domestic and industrial appliances and in control resistors.