Price: 76
Product ID : VGFAB
VGFAB3 Probe Tip=Double - VGFAB2 Probe Tip=Single Straight - VGFAB Probe Tip=Single Slanted -
Description
Scientific Instrument Services manufactures VG-FAB probe tips. These new probe tips are similar in construction to the original FAB tips but with a slightly larger and stronger alumina ceramic base. This results in a much more durable probe tip.
Three styles are available: the slanted design used on the majority of instruments (VG-FAB), the new straight design, (VG-FAB2), and the dual design (VG-FAB3) used on some of the newer instruments.
MS Calibration Compounds
Calibration compounds with a mass range for many uses and needs.SIS MS Filament and Heater Repair
Mass Spectrometer filaments and heaters can be repaired and restored to a like-new condition at S.I.S.VG/Fisons Mass Spectrometer Supplies and Services
Scientific Instrument Services offer a wide range of supplies and services for the VG/Fisons mass spectrometers. If an item is not listed, contact us and we will try to add it our product line. VG/Fisons Repair Services Back Plate Bellows Repair DCI Probe Tip Repair Diffusion Pump Fluid Probe Tip Repair VG/Fisons Replacement Parts Ceramic Insulators Ceramic Tubing, 6 hole Computer Air Filters Copper Gaskets DCI Probe Tip - New Design Direct Probe Tips FAB Parts FAB Probe FAB Probe Tips Filaments...
![Micro-Mesh® Regular Sheets](/i/art/part/sheet.jpg)
Micro-Mesh® Regular Sheets
![Individual Metric Viton® O-Rings](/i/vacuum/o-rings/vit-orings.jpg)
Hardness range is 70 to 80 Shore A durometer.
![Copper Gaskets for Vacuum Flanges](/i/vacuum/sis/copper-gasket.jpg)
The below listed vacuum flange copper gaskets are made from OFHC copper.
![Varian Ion Trap Copper and Gold Plated Copper Gaskets](/i/art/msparts/175-3.gif)
S.I.S. carries copper and gold plated copper gaskets for the Varian Saturn.
![Copper and Gold Plated Cu Gaskets for Thermo/Finnigan MS](/i/art/finnigan/108-2.gif)
The following copper and gold plated copper gaskets are available
for the vacuum flanges on Thermo/Finnigan mass spectrometers.
![VG FAB Parts](/i/art/vg/172-2.gif)
The aluminum plate exit aperture (VG#S100392AD1) and rear plug (VG#7021704)