Home
- ▶
- Heaters/Source
- ▶
- Agilent Heaters and SensorsMass Spectrometry, Scientific Supplies & ManufacturingScientific Instrument Services 5973 Source Heater Tamper Resistant Allen Wrench 5973/5975 Quad Sensor 5985 Source Heater Assembly Agilent Interface Heater Assembly 5971 Interface Heater
- ▶
- Instrument Tubing
- ▶
- Gas RegulatorsModel 3530 Series - Single Stage Purity Brass Regulator Model 3510 Series - Single Stage High Purity Stainless Steel Regulators Model 3120 Series - Dual Stage Purity Brass Regulator Model 3810 Series - Dual Stage High Purity Stainless Steel Regulators Tescom Gas Line Regulators 3420 Series Tescom Gas Line Regulators 3450 Series Concoa In-Line Regulators Model 304 Series Concoa In-Line Regulators Model 324 Series
- ▶
- GCColumns Fused Silica Tubing Instrument Tubing Injection Port Liners Septa by Manufacturer SIS GC Cryo-Traps Ferrules Valves Swagelok® Fittings Pyrolysis Probe Accessories Gas Generators Gas Regulators Gas Purifiers and Filters Syringes SGE MEPS™-Micro Extraction by Packed Sorbent Purge and Trap System SGE SilFlow™ Stainless Steel Micro-Fluidic Platform Accessories NIST GC RI Library Other GC Supplies Catalog Page D1
- ▶
- Syringes (GC)
- ▶
- SGE Diamond MS Syringes and Needles
- ▶
- SGE Diamond MS Needles (This Page)
Hover over image to zoom
Description
Needle Treatment Guide:
US = Ultra Smooth
USH = Ultra Smooth Hydrophilic
USHB = Ultra Smooth Hydrophobic
Diamond MS syringes have unbeatable clean-ability thereby further reducing carryover
Anything in the sample flow path can interact with your sample and impact your results, so SGE has developed ‘Ultra Smooth’needles to reduce non specific interaction between your sample and the needle.
Specs
Reduce non-specific interaction and increase sample recovery
To reduce non specific sample interaction even further, there are two needle coating options available to avoid sample interactions due to hydrophilicity and hydrophobicity. 3 Ultra Smooth needles available for you to choose based on your sample properties:
The Choice for Sensitivity
How to choose your MS ready syringe and needle for improved sensitivity:
- Choose a manual syringe or one specifically designed for your instrument
- Select the syringe capacity
- Choose the needle geometry – LC or GC injections, tip design and needle dimensions
- Choose which 'Ultra Smooth' needle best suits your application
| Part No. | Needle Length (mm) | Gauge | OD(mm) | ID(mm) | Tip Style | Needle Treatment | Quantity In Stock |
Price EA |
Order | |
|---|---|---|---|---|---|---|---|---|---|---|
| LC Needles | ||||||||||
| 0355210 | for 10-50 µL | |||||||||
| 51 | 22 | 0.72 | 0.17 | LC | USH | DISCONTINUED | --- | --- | ||
| 0355215 | for 10-50 µL | |||||||||
| 57 | 22 | 0.72 | 0.17 | LC | USH | DISCONTINUED | --- | --- | ||
| 0355220 | for 10-50 µL | |||||||||
| 51 | 22 | 0.72 | 0.17 | LC | USHB | DISCONTINUED | --- | --- | ||
| 0355225 | for 10-50 µL | |||||||||
| 57 | 22 | 0.72 | 0.17 | LC | USHB | DISCONTINUED | --- | --- | ||
| 0355230 | for 10-50 µL | |||||||||
| 51 | 22 | 0.72 | 0.17 | LC | US | DISCONTINUED | --- | --- | ||
| 0355235 | for 10-50 µL | |||||||||
| 57 | 22 | 0.72 | 0.17 | LC | US | DISCONTINUED | --- | --- | ||
| 0355211 | for 100-500 µL | |||||||||
| 51 | 22 | 0.72 | 0.17 | LC | USH | DISCONTINUED | --- | --- | ||
| 0355213 | for 100-500 µL | |||||||||
| 51 | 22 | 0.72 | 0.37 | LC | USH | DISCONTINUED | --- | --- | ||
| 0355216 | for 100-500 µL | |||||||||
| 57 | 22 | 0.72 | 0.17 | LC | USH | DISCONTINUED | --- | --- | ||
| 0355221 | for 100-500 µL | |||||||||
| 51 | 22 | 0.72 | 0.17 | LC | USHB | DISCONTINUED | --- | --- | ||
| 0355223 | for 100-500 µL | |||||||||
| 51 | 22 | 0.72 | 0.37 | LC | USHB | DISCONTINUED | --- | --- | ||
| 0355226 | for 100-500 µL | |||||||||
| 57 | 22 | 0.72 | 0.17 | LC | USHB | DISCONTINUED | --- | --- | ||
| 0355231 | for 100-500 µL | |||||||||
| 51 | 22 | 0.72 | 0.17 | LC | US | DISCONTINUED | --- | --- | ||
| 0355233 | for 100-500 µL | |||||||||
| 51 | 22 | 0.72 | 0.37 | LC | US | DISCONTINUED | --- | --- | ||
| 0355236 | for 100-500 µL | |||||||||
| 57 | 22 | 0.72 | 0.17 | LC | US | DISCONTINUED | --- | --- | ||
| GC Needles | ||||||||||
| 0355310 | for 10-50 µL | |||||||||
| 50 | 26 | 0.47 | 0.11 | Bevel | USH | DISCONTINUED | --- | --- | ||
| 0355311 | for 10-50 µL | |||||||||
| 50 | 25 | 0.5 | 0.2 | Bevel | USH | DISCONTINUED | --- | --- | ||
| 0355320 | for 10-50 µL | |||||||||
| 50 | 26 | 0.47 | 0.11 | Bevel | USHB | DISCONTINUED | --- | --- | ||
| 0355321 | for 10-50 µL | |||||||||
| 50 | 25 | 0.5 | 0.2 | Bevel | USHB | DISCONTINUED | --- | --- | ||
| 0355330 | for 10-50 µL | |||||||||
| 50 | 26 | 0.47 | 0.11 | Bevel | US | DISCONTINUED | --- | --- | ||
| 0355331 | for 10-50 µL | |||||||||
| 50 | 25 | 0.5 | 0.2 | Bevel | US | DISCONTINUED | --- | --- | ||
| 0355312 | for 100-500 µL | |||||||||
| 50 | 25 | 0.5 | 0.2 | Bevel | US | DISCONTINUED | --- | --- | ||
| 0355313 | for 100-500 µL | |||||||||
| 50 | 23 | 0.63 | 0.32 | Bevel | US | DISCONTINUED | --- | --- | ||
| 0355322 | for 100-500 µL | |||||||||
| 50 | 25 | 0.5 | 0.2 | Bevel | USHB | DISCONTINUED | --- | --- | ||
| 0355323 | for 100-500 µL | |||||||||
| 50 | 23 | 0.63 | 0.32 | Bevel | USHB | DISCONTINUED | --- | --- | ||
| 0355332 | for 100-500 µL | |||||||||
| 50 | 25 | 0.5 | 0.2 | Bevel | US | DISCONTINUED | --- | --- | ||
| 0355333 | for 100-500 µL | |||||||||
| 50 | 23 | 0.63 | 0.32 | Bevel | US | DISCONTINUED | --- | --- | ||
| 0355410 | for Agilent and Shimadzu | |||||||||
| 42 | 23 | 0.63 | 0.24 | Cone | USH | DISCONTINUED | --- | --- | ||
| 0355411 | for Agilent and Shimadzu | |||||||||
| 42 | 23 | 0.63 | 0.11 | Cone | USH | DISCONTINUED | --- | --- | ||
| 0355420 | for Agilent and Shimadzu | |||||||||
| 42 | 23 | 0.63 | 0.24 | Cone | USHB | DISCONTINUED | --- | --- | ||
| 0355421 | for Agilent and Shimadzu | |||||||||
| 42 | 23 | 0.63 | 0.11 | Cone | USHB | DISCONTINUED | --- | --- | ||
| 0355430 | for Agilent and Shimadzu | |||||||||
| 42 | 23 | 0.63 | 0.24 | Cone | US | DISCONTINUED | --- | --- | ||
| 0355431 | for Agilent and Shimadzu | |||||||||
| 42 | 23 | 0.63 | 0.11 | Cone | US | DISCONTINUED | --- | --- | ||
| 0355510 | for 10-50 µL autosampler | |||||||||
| 50 | 23 | 0.63 | 0.24 | Cone | USH | DISCONTINUED | --- | --- | ||
| 0355512 | for 10-50 µL autosampler | |||||||||
| 50 | 23 | 0.63 | 0.11 | Cone | USH | DISCONTINUED | --- | --- | ||
| 0355520 | for 10-50 µL autosampler | |||||||||
| 50 | 23 | 0.63 | 0.24 | Cone | USHB | DISCONTINUED | --- | --- | ||
| 0355522 | for 10-50 µL autosampler | |||||||||
| 50 | 23 | 0.63 | 0.11 | Cone | USHB | DISCONTINUED | --- | --- | ||
| 0355530 | for 10-50 µL autosampler | |||||||||
| 50 | 23 | 0.63 | 0.24 | Cone | US | DISCONTINUED | --- | --- | ||
| 0355532 | for 10-50 µL autosampler | |||||||||
| 50 | 23 | 0.63 | 0.11 | Cone | US | DISCONTINUED | --- | --- | ||
| 0355511 | for 100 µL | |||||||||
| 50 | 23 | 0.63 | 0.24 | Cone | USH | DISCONTINUED | --- | --- | ||
| 0355521 | for 100 µL | |||||||||
| 50 | 23 | 0.63 | 0.24 | Cone | USHB | DISCONTINUED | --- | --- | ||
| 0355531 | for 100 µL | |||||||||
| 50 | 23 | 0.63 | 0.24 | Cone | US | DISCONTINUED | --- | --- | ||
| 0355610 | for Thermo 10-50 µL | |||||||||
| 57 | 23 | 0.63 | 0.24 | Cone | USH | DISCONTINUED | --- | --- | ||
| 0355612 | for Thermo 10-50 µL | |||||||||
| 57 | 23 | 0.63 | 0.11 | Cone | USH | DISCONTINUED | --- | --- | ||
| 0355620 | for Thermo 10-50 µL | |||||||||
| 57 | 23 | 0.63 | 0.24 | Cone | USHB | DISCONTINUED | --- | --- | ||
| 0355622 | for Thermo 10-50 µL | |||||||||
| 57 | 23 | 0.63 | 0.11 | Cone | US | DISCONTINUED | --- | --- | ||
| 0355630 | for Thermo 10-50 µL | |||||||||
| 57 | 23 | 0.63 | 0.24 | Cone | US | 0†Standard lead-time for non-stock items is approximately two weeks depending on the item. | $110.20 | |||
| 0355632 | for Thermo 10-50 µL | |||||||||
| 57 | 23 | 0.63 | 0.11 | Cone | US | DISCONTINUED | --- | --- | ||
| 0355611 | for Thermo 100 µL | |||||||||
| 57 | 23 | 0.63 | 0.24 | Cone | USH | DISCONTINUED | --- | --- | ||
| 0355621 | for Thermo 100 µL | |||||||||
| 57 | 23 | 0.63 | 0.24 | Cone | USHB | DISCONTINUED | --- | --- | ||
| 0355631 | for Thermo 100 µL | |||||||||
| 57 | 23 | 0.63 | 0.24 | Cone | US | DISCONTINUED | --- | --- | ||
|
* Call for availability. † Standard lead-time for non-stock items is approximately two weeks depending on the item. | ||||||||||
Ordering information.
International (non-US) prices available through your
local dealer.
|
||||||||||
SGE Ferrules for GC standard graphite ferrules (for GC applications)
SGE Graphitized Vespel® Ferrules Vespel® ferrules contain 15% graphite and are ideal for glass and fused silica capillary columns.
Micro-Mesh® Metal Finishing Kit Micro-Mesh® kit for polishing stainless steel, copper, brass, bronze, aluminum
and other soft metals to a mirror finish.
SGE Diamond MS Syringes The unique design of Diamond MS syringes.
Micro-Mesh® Sanding Swabs The Micro-Mesh® Swabs are used for anything from polymer clay to porcelain, plastics, and more.
Disposable Lint Free Essential Cloths/Wipes Wipes are disposable, 100% cellulose, lint-free cloths designed for cleaning areas where non-contamination is essential.
Micro-Mesh® 5/8" x 5-3/4" 4 Way Buffer Micro-Mesh® Buffers
SGE GC Injection Port Liners SGE offers a wide variety of injection port liners.
SGE Septa for Varian GC septa by SGE for Varian.