Catalog D23
Home
- ▶
- Heaters/Source
- ▶
- Agilent Heaters and SensorsMass Spectrometry, Scientific Supplies & ManufacturingScientific Instrument Services 5973 Source Heater Tamper Resistant Allen Wrench 5973/5975 Quad Sensor 5985 Source Heater Assembly Agilent Interface Heater Assembly 5971 Interface Heater
- ▶
- Instrument Tubing
- ▶
- Gas RegulatorsModel 3530 Series - Single Stage Purity Brass Regulator Model 3510 Series - Single Stage High Purity Stainless Steel Regulators Model 3120 Series - Dual Stage Purity Brass Regulator Model 3810 Series - Dual Stage High Purity Stainless Steel Regulators Tescom Gas Line Regulators 3420 Series Tescom Gas Line Regulators 3450 Series Concoa In-Line Regulators Model 304 Series Concoa In-Line Regulators Model 324 Series
- ▶
- GCColumns Fused Silica Tubing Instrument Tubing Injection Port Liners Septa by Manufacturer SIS GC Cryo-Traps Ferrules Valves Swagelok® Fittings Pyrolysis Probe Accessories Gas Generators Gas Regulators Gas Purifiers and Filters Syringes SGE MEPS™-Micro Extraction by Packed Sorbent Purge and Trap System SGE SilFlow™ Stainless Steel Micro-Fluidic Platform Accessories NIST GC RI Library Other GC Supplies Catalog Page D1
- ▶
- GC Ferrules
- ▶
- Agilent (This Page)
Hover over image to zoom
Description
About TALU Technologies Ltd.TALU Technologies manufactures and supplies graphite, PTFE and Vespel®/Graphite ferrules primarily to GC instrument manufacturers and to GC & GC-MS accessory suppliers worldwide. TALU manufactures the largest variety of graphite ferrules and a variety of Vespel/Graphite ferrules.
TALU’s Products
TALU uses only the purest graphite available in the production of its graphite ferrules. TALU’s products meet all industry specifications.
The TALU Advantage
- Because TALU is the manufacturer, TALU’s prices are by far the lowest you’ll find
- TALU guarantees its products
| Talu Ferrules - per pack of 10 | ||||||||
| Part No. | Type | Column Size (I.D.) | Material | Actual Size | Quantity In Stock |
UOM | Price | Order |
|---|---|---|---|---|---|---|---|---|
| 1102114 | Short | 0.20 - 0.25 mm | Graphite | 1/16" Nut x 0.5 mm ID | 0*Standard lead-time for non-stock items is approximately two weeks depending on the item. | PK | $12.50 | |
| 1102118 | Short | 0.53 mm | Graphite | 1/16" Nut x 0.8 mm ID | DISCONTINUED | PK | --- | --- |
| 1102115 | Short | 0.32 mm | Graphite | 1/16" Nut x 0.5 mm ID | 0*Standard lead-time for non-stock items is approximately two weeks depending on the item. | PK | $12.50 | |
| 1101042 | Short | 0.53 mm | Graphite | 1/16" Nut x 0.5 mm ID | DISCONTINUED | PK | --- | --- |
| 1102110 | Short | 0.65 mm | Graphite | 1/16" Nut x 1.0 mm ID | DISCONTINUED | PK | --- | --- |
| TL85104 | Short | 0.1 - 0.25 mm | 15% Graphite/85% Vespel | 1/16" Nut x 0.4 mm ID | 0*Standard lead-time for non-stock items is approximately two weeks depending on the item. | PK | $40.00 | |
| TL85105 | Short | 0.32 mm | 15% Graphite/85% Vespel | 1/16" Nut x 0.5 mm ID | 0*Standard lead-time for non-stock items is approximately two weeks depending on the item. | PK | $53.42 | |
| TL85108 | Short | 0.45 - 0.53 mm | 15% Graphite/85% Vespel | 1/16" Nut x 0.8 mm ID | DISCONTINUED | PK | --- | --- |
| 1111600 | Straight | Graphite | 1/16" Nut x 1/16" ID | 0*Standard lead-time for non-stock items is approximately two weeks depending on the item. | PK | $12.50 | ||
| 1118000 | Straight | Graphite | 1/8" Nut x 1/18" ID | DISCONTINUED | PK | --- | --- | |
| 1114000 | Straight | Graphite | 1/4" Nut x 1/4" ID | DISCONTINUED | PK | --- | --- | |
| TL85600 | Straight | 15% Graphite/85% Vespel | 1/16" Nut x 1/16" ID | DISCONTINUED | PK | --- | --- | |
| 1102004 | Reducing | 0.25 mm | Graphite | 1/16" - 0.4 mm ID | DISCONTINUED | PK | --- | --- |
| 1102005 | Reducing | 0.32 mm | Graphite | 1/16" - 0.5 mm ID | DISCONTINUED | PK | --- | --- |
| 1102008 | Reducing | 0.53 mm | Graphite | 1/16" - 0.8 mm ID | DISCONTINUED | PK | --- | --- |
| 1111610 | Reducing | 0.65 mm | Graphite | 1/16" - 1.0 mm ID | DISCONTINUED | PK | --- | --- |
| 1111612 | Reducing | 0.75 mm | Graphite | 1/16" - 1.2 mm ID | DISCONTINUED | PK | --- | --- |
| TL85603 | Reducing | 0.1 mm | 15% Graphite/85% Vespel | 1/16" - 0.3 mm ID | DISCONTINUED | PK | --- | --- |
| TL85604 | Reducing | 0.2-0.25 mm | 15% Graphite/85% Vespel | 1/16" - 0.4 mm ID | DISCONTINUED | EA | --- | --- |
| TL85605 | Reducing | 0.32 mm | 15% Graphite/85% Vespel | 1/16" - 0.5 mm ID | 2 | PK | $40.00 | |
| TL85608 | Reducing | 0.42-0.53 mm | 15% Graphite/85% Vespel | 1/16" - 0.8 mm ID | DISCONTINUED | PK | --- | --- |
| 1118116 | Reducing | 16" OD tube | Graphite | 1/8" - 1/16" ID | DISCONTINUED | PK | --- | --- |
| 1114116 | Reducing | 1/16" OD tube | Graphite | 1/4" - 1/16" ID | DISCONTINUED | PK | --- | --- |
| 1114118 | Reducing | 1/8" OD tube | Graphite | 1/4" - 1/18" ID | DISCONTINUED | PK | --- | --- |
| 1102006 | Reducing | 6.0 mm | Graphite | 1/4" ID | DISCONTINUED | PK | --- | --- |
| 11160NH | No Hole | Graphite | 1/16" x no hole | DISCONTINUED | PK | --- | --- | |
| TL8516NH | No Hole | 15% Graphite/85% Vespel | 1/16" x no hole | DISCONTINUED | PK | --- | --- | |
| TL85624 | 2 hole | 0.2 - 0.25 mm | 15% Graphite/85% Vespel | 1/16" - two holes .4/.4 | DISCONTINUED | PK | --- | --- |
| TL85625 | 2 hole | 0.32 | 15% Graphite/85% Vespel | 1/16" - two holes .5/.5 | DISCONTINUED | PK | --- | --- |
| 08154168 | O-ring | Graphite | 6.35 mm ID x 9.63 mm OD | DISCONTINUED | PK | --- | --- | |
| 08154173 | O-ring | Graphite | 6.52 mm ID x 9.63 mm OD | DISCONTINUED | PK | --- | --- | |
|
* Standard lead-time for non-stock items is approximately two weeks depending on the item. † Call for availability. | ||||||||
Ordering information.
International (non-US) prices available through your
local dealer.
|
||||||||
Electron Multipliers, DeTech 2300 Multipliers for Agilent 5975/5973/597X/1100 Get a DeTech 2300 Electron Multiplier here.
Used in Agilent 5975 MSD (without TAD)/5973/5972/5971/5970/1100 LC-MSD mass spectrometers and backed by a 100% no-nonsense warranty. Developed by Detector Technology, Inc.
SGE Ferrules for GC standard graphite ferrules (for GC applications)
SGE Graphitized Vespel® Ferrules Vespel® ferrules contain 15% graphite and are ideal for glass and fused silica capillary columns.
TALU Technologies Standard Graphite Ferrules TALU Technologies manufactures and supplies graphite, Vespel®/graphite ferrules primarily to GC instrument manufacturers and to GC & GC-MS accessory suppliers worldwide.