Home
- ▶
- Heaters/Source
- ▶
- Agilent Heaters and SensorsMass Spectrometry, Scientific Supplies & ManufacturingScientific Instrument Services 5973 Source Heater Tamper Resistant Allen Wrench 5973/5975 Quad Sensor 5985 Source Heater Assembly Agilent Interface Heater Assembly 5971 Interface Heater
- ▶
- Probes
- ▶
- Probes and Related Supplies for Thermo MSStraight Sample Vials for Thermo/Finnigan MAT (Varian MAT) Flared Pyrex Sample Vials for Thermo/Finnigan and SIS Mass Spec Probes Direct Insertion Probe For Agilent (Hewlett Packard) 5989 Mass Spectrometers DCI/DEP Probe High Temperature Direct Probe Thero/Finnigan MAT 3200 Capillary Probe Tube Springs Thermo/Finnigan MAT TSQ FAB Tips
- ▶
- Flared Pyrex Sample Vials
- ▶
- Thermo Direct Probe Flared Vials (This Page)
Hover over image to zoom
Price: 160
Product ID : S95A
S95A Pack of=100 Flared Sample Vials for Thermo Probe S95B Pack of=1000 Flared Sample Vials for Thermo Probe S95C Pack of=500 Flared Sample Vials for Thermo Probe
Description
All vials are made to your specifications. Flared sample vials are supplied in packages of one hundred (100), five hundred (500), or one thousand (1000). Outside and inside dimensions currently available are listed in the Dimensions Available tab. Other dimensions are available on special request.
Vials are constructed of Borosilicate glass (Pyrex). O.D. tolerances are ±0.02 mm (0.001 inch) and length tolerance is ±0.20 mm (0.008 inch). The ends are cut clean and straight. Vials are clean and contamination free.
(Thermo #32000-60310)
Standard Size Straight Sealed Pyrex Sample Vials SIS offers a line of standard sample vials for specific mass spectrometer instruments.- Shimadzu Straight Sealed Pyrex Sample Vials Shimadzu standard size vials.
- VG Straight Sealed Pyrex Sample Vials VG standard size vials.
Direct Probe Sample Vial Blocks The blocks are constructed of solid aluminum to hold heat.
SIS HPP7 Direct Insertion Probe for the Agilent/HP 5973/5975 MSD Direct Probe and Probe Inlet System for the HP 5973/5975 MSD mounts on the GC/MS inlet of the MSD
Straight Pyrex Glass Sample Vials for Mass Spec Probes Straight pyrex sample vials.
Direct Probe Sample Vial Blocks The blocks are constructed of solid aluminum to hold heat.
Varian Saturn Ion Trap Filaments Quality replacement filaments for your Ion Trap mass spectrometer. For Saturn model 2000, 2100, 2200 series
Thermo/Finnigan MS Probe Sample Vials, Straight Available in either pyrex glass or quartz.
GCQ Probe and Probe Inlet GCQ Probe and Probe Inlet
Direct Insertion Probe for HP MS with Controller A ½ inch probe inlet, provides the user with greater flexibility and much faster ramp rates than the standard HP DIP probe.
SIS Flared Vials - 10 mm SIS Flared Vials - 10 mm
High Temperature Direct Probe for HP and Finnigan MS The probes can be used from ambient temperature up to 800 degrees C with ballistic temperature ramp of over 700 degrees C/min.
FC-43 (Perfluorotributylamine) Calibration Compound This compound is available in bottles of 35, 100, and 200 grams.
Santovac 5P Ultra and polyphenyl ether vacuum pump fluid Santovac 5P Ultra has the same properties of Santovac 5 but guarantees minimal amounts of the 3 and 4 ring polyphenyl ethers; less than .02% and .1% respectively and for ultra-clean applications such as
mass spectrometry.