Home
- ▶
- Heaters/Source
- ▶
- Agilent Heaters and SensorsMass Spectrometry, Scientific Supplies & ManufacturingScientific Instrument Services 5973 Source Heater Tamper Resistant Allen Wrench 5973/5975 Quad Sensor 5985 Source Heater Assembly Agilent Interface Heater Assembly 5971 Interface Heater
- ▶
- TD
- ▶
- AccessoriesTD Supply Kit Desorption Tubes Adsorbent Resins Desorption Tube Needles Desorption Tube Seals Desorption System Fittings GC Cryo-Trap Extraction Cell TD Sample Loader Prepacked, Conditioned Desorption Tubes Desorption Tube Packing Accessories Stainless Steel Purge Heads Injection Port Liners Tenax TA Poster TD Application Notes Customer Service
- ▶
- Desorption Tube Packing Accessories
- ▶
- Tap & Die (This Page)
Hover over image to zoom
Price: 0
Product ID : 789001
789001 Options=*1/4 X 48 TPI DIE 789002 Options=*1/4 X 48 TPI TAP
Description
These taps and dies are used to clean threads or desorption tubes on accessories threader when they become contaminated or slightly cross threaded.
- Clean threads on Silco Coated desorption tubes & accessory fittings
- 1/4" x 48 thread/ in.
- Accessory handle for tap available
If the desorption tube threads exhibit any restriction or drag on threading into the desorption system or when attaching a needle, the threads on the tube should be cleaned using a thread die, otherwise the desorption tube should seize in the system.
Cleaning Brushes For cleaning inside Silco Coated desorption tubes
Short Path Thermal Desorption Tubes After conditioning and sample loading, the ends of the tubes are fitted with stainless steel caps with seals to maintain the integrity of the medium and sample.
Aluminum Funnel for Loading Packings into Desorption Tubes SPTD Accessory
Heater Sleeves for Sample Purging System Compact Portable Temperature Controller with Thermocouple Feedback Control
Small Sample Spatula For loading small samples into Silco Coated desorption tubes
Short Path Thermal Desorption Accessories Supply Kit When ordering the Short Path Thermal Desorption System, a wide range of systems and accessories are available depending on the application requirements of the user.
Tenax® TA Adsorbent Resin Tenax® TA is a porous polymer resin based on 2.6-diphenylene oxide.
SIS Purge and Trap System The Purge and Trap System consists of two single-ball rotameters with adjustable needle valve mounted on a nylon plastic base with an 18" long mounting rod support.