Home
- ▶
- Heaters/Source
- ▶
- Agilent Heaters and SensorsMass Spectrometry, Scientific Supplies & ManufacturingScientific Instrument Services 5973 Source Heater Tamper Resistant Allen Wrench 5973/5975 Quad Sensor 5985 Source Heater Assembly Agilent Interface Heater Assembly 5971 Interface Heater
- ▶
- Calibration Compounds
- ▶
- FC-70 (This Page)
Hover over image to zoom
Price: 0
Product ID : FC7035
FC7035 Bottle Size=35 grams Bottle of FC-70 FC70100 Bottle Size=100 grams Bottle of FC-70
This new calibration compound is an ideal supplement to FC-43 and will be extremely useful for calibration in the 500 to 600 mass range. FC-70 is a liquid at room temperature and can be used in the same manner as FC-43. FC-70 is available in bottles of 35 and 100 grams.
Specifications
| FC-70 | Perfluorotripentylamine |
|---|---|
| Molecular Weight | 821 |
| Formula | (CF3(CF2)4)3N |
| Boiling Point | 215 degrees C |
| Density | 25 degrees C - 1.94 |
Spectra
Mass Spec Calibration Spectra for FC-70
EI Positive Ion Spectra for FC-70
m/z Rel. Abundance m/z Rel. Abundance --- -------------- --- -------------- 50 0.8 181 14.0 69 100.0 182 0.6 70 1.2 219 0.8 93 1.1 231 0.8 100 9.1 269 19.8 114 3.5 270 1.1 119 10.9 314 3.3 120 0.6 364 0.2 131 14.0 514 0.8 132 0.4 526 0.4 151 1.2 564 0.8 169 3.3 602 0.4Methane Negative Ion CI Spectra for FC-70
m/z Rel. Abundance m/z Rel. Abundance --- -------------- --- -------------- 219 1.97 552 100.00 281 1.50 553 11.99 314 1.99 564 4.04 333 4.92 576 1.48 352 4.96 583 1.84 383 1.49 602 3.37 395 1.36 614 7.08 412 1.50 626 2.23 414 1.95 633 1.47 433 4.06 664 4.51 450 1.17 676 1.31 452 3.39 683 1.18 464 1.50 733 1.54 476 1.87 745 4.54 483 1.90 783 14.47 502 3.20 784 2.37 514 12.87 833 1.40 515 1.66 - - 526 1.30 533 4.45
SDS
FC-43 Calibration Compound This compound is available in bottles of 35, 100, and 200 grams.
MS Probes and Sample Vials Direct Probes and accessories for your mass spectrometer.
#CV1 Cal Gas Vial - #CV100
FC-43 (Perfluorotributylamine) Calibration Compound This compound is available in bottles of 35, 100, and 200 grams.
CsI/RbI/NaI Calibration Compound (FAB-C1)
This 1:1:1 molar mixture is a 10% solution in distilled water.
Cesium Iodide Calibration Compound (FAB-C2)
This is a 10% solution in distilled water and is used for the 2000 to 5000 range.
Ion Gauge Tubes, Bayard-Alpert Type Bayard-Alpert Design and Dual Tungsten or Burn-out Resistant Iridium
Santovac 5P Ultra and polyphenyl ether vacuum pump fluid Santovac 5P Ultra has the same properties of Santovac 5 but guarantees minimal amounts of the 3 and 4 ring polyphenyl ethers; less than .02% and .1% respectively and for ultra-clean applications such as
mass spectrometry.
Micro-Mesh® Regular Sheets Micro-Mesh® Regular Sheets