Vacuum Pump Exhaust Filter Kits for Adixen Vacuum Pumps - FK101

Description

Removes Contaminants From Vacuum Pump Exhaust

The Pump Filter Kit for the Adixen Pump (Kit # FK101) includes the Oil Mist Eliminator, Koby Charcoal Trap and all the fittings needed to attach this two filter system to the NW25 fitting on the Adixen series of vacuum pumps. This kit is to be used with all Adixen vacuum pumps with NW25 fittings on the exhaust port. It can also be used with any other manufacturers pumps that have an NW25 flange type fitting on the exhaust port.

FK101 Filter Kit Assembly

Assembly of the Two-Stage Exhaust Filter System
Part # KA1 Koby Charcoal Filter
Part # QF25100AP25 1/4" to NW25 Adaptor
Part # QF25100CW NW25 Quick Clamp
Part # QF25100ARB Centering Ring
Part # 66827 Oil Mist Eliminator Centering Ring Quick Connect Clamp Horizontal Adaptor

Contents

Reference

General Information on SIS Exhaust Systems

The Koby Charcoal Filters are highly recommended to be placed on the exhaust of vacuum pumps that are normally vented directly into the laboratory.  SIS has undertaken extensive studies on the application and efficiency of the Koby filters when used on vacuum pump exhausts. Vacuum exhaust air which is exhausted  through the Koby filter, has been shown to be cleaner than normal room air.

Figure # 1 - Effect of Vacuum Pump Exhaust Filtering

The chart above shows the steps in filtering air from a vacuum pump after 1.0 ml of gasoline was injected into the pump.  The top chromatograph shows the low boiling organics as well as high boiling hydrocarbons that are exhausted out of the vacuum pump before any filtering.  The second chromatogram shows the exhaust air after the oil mist eliminator - the oil mist eliminator traps the heavy hydrocarbons from the pump oil and returns them to the pump.  The bottom chromatogram shows the exhaust air after it is filtered through the Koby trap - the exhaust air is cleaner than the normal room air.

For additional information and the results of our studies visit the SIS Application Notes on Vacuum Pump Exhaust Filters:

• # 82 - Vacuum Pump Exhaust Filters, Part I - Two Stage Vacuum Pump Exhaust Filter System
• # 83 - Vacuum Pump Exhaust Filters, Part II - Oil Mist Eliminators
• # 84 - Vacuum Pump Exhaust Filters, Part III - Charcoal Exhaust Traps

It is normally recommended that the Koby carbon filters  be used in conjunction with an oil mist eliminator. The oil mist eliminator traps and returns the vacuum pump oil to the vacuum pump, preventing this oil from saturating the charcoal filter which will reduce its life. The Koby Air Purifier removes any remaining organic contamination which might otherwise be emitted into the laboratory air.

Kits for Other Vacuum Pumps are also available from SIS.

• FK101 - Exhaust filter Kit for Alcatel Vacuum Pumps
• FK201 - Exhaust Filter Kit for Edward Pump Models E1M5/8, E2M3/5/8, RV3/5/8
• FK251 - Exhaust Filter Kit for Edward Pump Models E2M0.7, E2M1, E2M1.5
• FK251 - Exhaust Filter Kit for use on Agilent MSD Systems
• FK261 - Exhaust Filter Kit for use on Edwards Model E2M18 and E2M28 Vacuum Pumps
• FK241 - Exhaust Filter Kit for use on Edwards Models E2M30 Vacuum Pumps

Oil Mist Eliminators and Koby Filters can also be purchased separately from SIS

• Koby Charcoal Filter Traps
• Alcatel Oil Mist Eliminators
• Edward Oil Mist Eliminators

Extra Information

Ordering

Adixen Vacuum Pump Kit (Kit FK101) contains the Adixen Oil Mist Eliminator, Koby Filter and the fittings shown above.  This kit is all you need to install the complete two stage exhaust filter to your Adixen vacuum pump.

Maintenance Accessories:  

Koby Charcoal Filters (KA1) -   It is recommended that the Koby Charcoal Traps be changed monthly to assure the highest efficiency of exhaust filtering.  But in lots of 10 or more and save.

Paper Filters for Adixen Oil Mist Eliminator (68838) - It is recommended that the paper filter in the Adixen Oil Mist Eliminator is changed yearly, or more frequently if very caustic materials are pumped through the vacuum pump.