Price: 0
Product ID : Z18
Z18 CERAMIC INSULATOR FINNIGAN #01554-20010
Description
More details on associated web pages:
- Ceramic Insulators for Thermo The following alumina insulators are currently available for the Thermo instruments.
- Ceramic Washer Insulators A wide variety of alumina ceramic washers.
- Thermo/Finnigan Part Number Cross Reference Scientific Instrument Services carries a wide selection of parts for all models of Thermo/Finnigan mass spectrometers. In order to aid you in the selection of replacement parts for your instrument, the following part number cross reference chart can be used. If a part number is not listed, it either means we do not have that part in our inventory or perhaps we are not aware of the Thermo part number in relation to our inventory. If you are looking for a part not listed below, use our Search Syst...
- Ceramic Insulators
(Catalog A60) - Ceramic Insulators for Thermo
(Catalog B18)
A wide variety of alumina ceramic washers.
The following alumina insulators are currently available for the Thermo instruments.
Alumina ceramics for the Incos 50 Source.
The tubes are constructed of a pure 99% alumina ceramic that has superior gas and vacuum tightness and excellent insulating properties even at elevated temperatures.
The following two hole alumina ceramic tube type insulators are available in six inch lengths.
This 8 watt, 24 volt source heater cartridge for the Finnigan MAT Incos 50 Source measures 3/16 inch in diameter by 1.0 inch long.
Replacement insulators for Agilent mass spectrometers.
The following ceramic insulators are made from high purity alumina ceramic.
Tantalum/Tungsten Wire and Ribbon has excellent corrosion resistance and is used in the manufacture of heating elements.
Ceramic insulators for Dupont/CEC.
DST2 : Ceramic Insulator, Dupont #=294026-3, OD (in)=0.344, ID (in)=0.225, Thickness (in)=0.235,DST3 : Ceramic Insulator, Dupont #=294026-2, OD (in)=0.344, ID (in)=0.225, Thickness (in)=0.100,DST4 : Ceramic Insulator, Dupont #=294026-1, OD (in)=0.344, ID (in)=0.225, Thickness (in)=0.050
The new Graphitized Vespel® Injection Port Liner Seals are designed to replace the Viton® 'O' Ring Seals.