Product ID : V312
V312 O-Ring, Material=Viton[R], Nominal ID (in)=5/8, Nominal Width (in)=3/16, Actual ID (in)=0.600, Actual Width (in)=0.21
SS4P4T Pump Out Valve and HP12 Probe Inlet Seal
O-Rings are available in five different materials from Scientific Instrument Services.
Replacement or spare O-rings for centering rings.
This convenient o-ring kit contains 30 of the most popular sizes, for a total of 380 o-rings, in one convenient kit.
Hermetic, Sealed, In-line Oil Mist Separator For Mechanical Vacuum Pumps.
Quick action aluminum clamp with finger closure "T" knob for positive sealing of NW flanges.
Available with Viton® or Buna O-ring, this centering ring complete with O-ring should be used when joining any two NW flanges with a quick flange clamp.
In Brass and Aluminum and Stainless
The following copper and gold plated copper gaskets are available for the vacuum flanges on Thermo/Finnigan mass spectrometers.
All gaskets are .080" thick.
The below listed vacuum flange copper gaskets are made from OFHC copper.
Inland rough pump oil is ideal for use in all models of vacuum pumps including Adixen, Edwards, and Welch.