Price: 666.4
Product ID : 979503
979503 Tenax-TA[TM], Mesh=35/60, Size (g)=25.0
Description
More details on associated web pages:
Tenax® TA Adsorbent Resin
Tenax® TA is a porous polymer resin based on 2.6-diphenylene oxide.Adsorbent Resin for Trapping Volatiles
(Catalog C15)

The new Tenax® GR is a composite material of Tenax® TA and 30% graphite.

Tenax® TA is a porous polymer resin based on 2.6-diphenylene oxide.

After conditioning and sample loading, the ends of the tubes are fitted with stainless steel caps with seals to maintain the integrity of the medium and sample.

SPTD Accessory

CryoTrap for the AutoDesorb System

Fittings to connect our 1/4" O.D. GLT desorption tubes to your particular application.

The Extraction Cell system consists of two stainless steel plates which are separated by an inter-changeable PTFE insert.

The SIS AutoDesorb® 12-sample Short Path Thermal Desorption System,
for the analysis of volatiles and semi-volatiles by GC and GC/MS systems.

The top fitting of both purge heads consists of a 1/16" fitting for the attachment of the sparging needle followed by needle adaptor to seal the needle in place and provide for the attachment of the purging gas line.

This device is used to inject or load liquid samples directly into the S.I.S. Thermal Desorption Tubes, forcing the syringe contents onto the adsorbent resins in the desorption tube without any loss of sample due to back evaporation.

When ordering the Short Path Thermal Desorption System, a wide range of systems and accessories are available depending on the application requirements of the user.

Seals are utilized in a variety of locations in the Short Path Thermal Desorption Unit.