Price: 0
Product ID : 781060
781060 Dual Desorption Tube to 1/4in Tube Connector
Description
More details on associated web pages:
Desorption Tube Fittings
Fittings to connect our 1/4" O.D. GLT desorption tubes to your particular application.Desorption System Fittings
(Catalog C11)

All packed Thermal Desorption Tubes are Silco™ Coated S.S. tubes.

Fittings to connect our 1/4" O.D. GLT desorption tubes to your particular application.

This Sample Collection System permits the purging of volatiles and semi-volatile components present in solid materials and their trapping on Desorption Tubes packed with an adsorbent resin for subsequent analysis by desorption utilizing the Short Path Thermal Desorption System.

Tenax® TA is a porous polymer resin based on 2.6-diphenylene oxide.

The top fitting of both purge heads consists of a 1/16" fitting for the attachment of the sparging needle followed by needle adaptor to seal the needle in place and provide for the attachment of the purging gas line.

This device is used to inject or load liquid samples directly into the S.I.S. Thermal Desorption Tubes, forcing the syringe contents onto the adsorbent resins in the desorption tube without any loss of sample due to back evaporation.

When ordering the Short Path Thermal Desorption System, a wide range of systems and accessories are available depending on the application requirements of the user.

Seals are utilized in a variety of locations in the Short Path Thermal Desorption Unit.

In the Short Path Thermal Desorption System, the needle serves as the transfer line for sample introduction into the Gas Chromatograph from the Glass Lined Thermal Desorption Tube containing the samples being analyzed.

The Extraction Cell system consists of two stainless steel plates which are separated by an inter-changeable PTFE insert.