Price: 263
Product ID : 275071
275071 1/8 NPT CONVECTRON TUBE HP#0960 0540
Description
More details on associated web pages:
Agilent (Hewlett Packard) Part Number Cross Reference
Scientific Instrument Services carries a wide selection of parts for all models of Agilent (Hewlett Packard) mass spectrometers. In order to aid you in the selection of replacement parts for your instrument, the following part number cross reference chart can be used. If a part number is not listed, it either means we do not have that part in our inventory or perhaps we are not aware of the Agilent part number in relation to our inventory. If you are looking for a part not listed below, give us...Convectron Series 275 Vacuum Gauge
The Granville Philips Convectron Gauge tube used on the 5971 and 5972 mass spectrometers is available from S.I.S. This is a direct replacement for the HP original and screws into the fitting shown above.Granville Phillips Vacuum Gauge Controller
Granville-Phillips 340 Vacuum Gauge Controller (VGC) measures pressure from less than 1 x 10-9 Torr to atmosphere, utilizing an ionization gauge and two Convectron gauges.Agilent Vacuum Accessories
(Catalog B11)Convectron™Ionization Gauge Controllers
(Catalog F31)Vacuum Gauge Controller
(Catalog F32)

Granville-Phillips 340 Vacuum Gauge Controller (VGC) measures pressure from less than 1 x 10-9 Torr to atmosphere, utilizing an ionization gauge and two Convectron gauges.

The Granville Philips Convectron Gauge tube used on the 5971 and 5972 mass spectrometers is available from S.I.S. This is a direct replacement for the HP original and screws into the fitting shown above.

Bayard-Alpert Design and Dual Tungsten or Burn-out Resistant Iridium

This food and beverage grade, crystal clear PVC tubing is reinforced with 110 ton psi steel spring wire.

Santovac 5P Ultra has the same properties of Santovac 5 but guarantees minimal amounts of the 3 and 4 ring polyphenyl ethers; less than .02% and .1% respectively and for ultra-clean applications such as
mass spectrometry.

The finest reusable worm gear clamps made.

The standard fitting is for 3/4" hose.

Available with Viton® or Buna O-ring, this centering ring complete with O-ring should be used when joining any two NW flanges with a quick flange clamp.