Price: 0
Product ID : HT4500
HT4500 4500 HEATER ASSEMBLY FINNIGAN #40005 60270
Description
More details on associated web pages:
Thermo 4500/4600/TSQ Source Heaters Source heaters for your Thermo 4500 and TSQ.
Thermo/Finnigan Part Number Cross Reference Scientific Instrument Services carries a wide selection of parts for all models of Thermo/Finnigan mass spectrometers. In order to aid you in the selection of replacement parts for your instrument, the following part number cross reference chart can be used. If a part number is not listed, it either means we do not have that part in our inventory or perhaps we are not aware of the Thermo part number in relation to our inventory. If you are looking for a part not listed below, use our Search Syst...MS Cartridge Heaters
(Catalog A26)Thermo Mass Spec Parts
(Catalog B17)
Thermo 4500 PRT This EI/CI Source Temperature Sensor (PRT2) includes the 100 ohm platinum resistance thermometer, leads, ceramic insulator, and connectors.
Ion Gauge Tubes, Bayard-Alpert Type Bayard-Alpert Design and Dual Tungsten or Burn-out Resistant Iridium
Needles for the Short Path Thermal Desorption System In the Short Path Thermal Desorption System, the needle serves as the transfer line for sample introduction into the Gas Chromatograph from the Glass Lined Thermal Desorption Tube containing the samples being analyzed.
Short Path Thermal Desorption Accessories Supply Kit When ordering the Short Path Thermal Desorption System, a wide range of systems and accessories are available depending on the application requirements of the user.
Micro-Mesh® Regular Sheets Micro-Mesh® Regular Sheets
Copper Gaskets for Vacuum Flanges The below listed vacuum flange copper gaskets are made from OFHC copper.
Copper Gaskets for HP Mass Specs All gaskets are .080" thick.
Copper and Gold Plated Cu Gaskets for Thermo/Finnigan MS The following copper and gold plated copper gaskets are available
for the vacuum flanges on Thermo/Finnigan mass spectrometers.
Purge and Trap Stainless Steel Purge Heads The top fitting of both purge heads consists of a 1/16" fitting for the attachment of the sparging needle followed by needle adaptor to seal the needle in place and provide for the attachment of the purging gas line.
Thermal Desorption Sample Loader This device is used to inject or load liquid samples directly into the S.I.S. Thermal Desorption Tubes, forcing the syringe contents onto the adsorbent resins in the desorption tube without any loss of sample due to back evaporation.
Seals for SIS Thermal Desorption Tubes Seals are utilized in a variety of locations in the Short Path Thermal Desorption Unit.
Inland 45 Mechanical Pump Oil Inland 45 is the highest quality rough pump oil you can use for your mass spectrometer.