Product ID : 979501
979501 Tenax-TA[TM], Mesh=35/60, Size (g)=5.0
More details on associated web pages:
- Tenax® TA Adsorbent Resin Tenax® TA is a porous polymer resin based on 2.6-diphenylene oxide.
- Adsorbent Resin for Trapping Volatiles
Tenax® TA is a porous polymer resin based on 2.6-diphenylene oxide.
When ordering the Short Path Thermal Desorption System, a wide range of systems and accessories are available depending on the application requirements of the user.
After conditioning and sample loading, the ends of the tubes are fitted with stainless steel caps with seals to maintain the integrity of the medium and sample.
The top fitting of both purge heads consists of a 1/16" fitting for the attachment of the sparging needle followed by needle adaptor to seal the needle in place and provide for the attachment of the purging gas line.
Seals are utilized in a variety of locations in the Short Path Thermal Desorption Unit.
This device is used to inject or load liquid samples directly into the S.I.S. Thermal Desorption Tubes, forcing the syringe contents onto the adsorbent resins in the desorption tube without any loss of sample due to back evaporation.
The Wheaton Purge and Trap Apparatus is widely used for the isolation of pollutants in soil, sediment, waste water, and other solid and liquid samples by purging a clean gas over and thru the sample contained therein and trapping the purged volatiles on adsorbent traps.
The new Tenax® GR is a composite material of Tenax® TA and 30% graphite.
For Edwards models E2M0.7, E2M1, E2M1.5 pumps removes contaminants from vacuum pump exhaust.
Available with Viton® or Buna O-ring, this centering ring complete with O-ring should be used when joining any two NW flanges with a quick flange clamp.
In Aluminum, Stainless Steel, and Brass
Micro-Mesh® Regular Sheets