Price: 0
Product ID : 781022
781022 Desorption Tube Needle, Tip Style=20 deg point, Needle Length (mm)=60, OD (mm)=0.63, ID (mm)=0.32
Description
More details on associated web page:
- Needles for Desorption Tubes TD1, TD2, TD3, TD4, TD5 & AutoDesorb In the Short Path Thermal Desorption System, the needle serves as the transfer line for sample introduction into the Gas Chromatograph from the Glass Lined Thermal Desorption Tube containing the samples being analyzed.
Seals are utilized in a variety of locations in the Short Path Thermal Desorption Unit.
Fittings to connect our 1/4" O.D. GLT desorption tubes to your particular application.
The Extraction Cell system consists of two stainless steel plates which are separated by an inter-changeable PTFE insert.
This 24 tube conditioning oven is used for batch flow conditioning of both empty and packed Silco Coated SS desorption tubes as well as for the flow conditioning of the desorption tube needles.
The Desorption Tube Conditioning System is used for the flow conditioning of both empty and packed Silco Coated SS desorption tubes as well as for the flow conditioning of the desorption tube needles.
The top fitting of both purge heads consists of a 1/16" fitting for the attachment of the sparging needle followed by needle adaptor to seal the needle in place and provide for the attachment of the purging gas line.
This device is used to inject or load liquid samples directly into the S.I.S. Thermal Desorption Tubes, forcing the syringe contents onto the adsorbent resins in the desorption tube without any loss of sample due to back evaporation.
When ordering the Short Path Thermal Desorption System, a wide range of systems and accessories are available depending on the application requirements of the user.
After conditioning and sample loading, the ends of the tubes are fitted with stainless steel caps with seals to maintain the integrity of the medium and sample.