Product ID : 979502
979502 Tenax-TA[TM], Mesh=35/60, Size (g)=10.0
More details on associated web pages:
- Tenax® TA Adsorbent Resin Tenax® TA is a porous polymer resin based on 2.6-diphenylene oxide.
- Adsorbent Resin for Trapping Volatiles
Tenax® TA is a porous polymer resin based on 2.6-diphenylene oxide.
The new Tenax® GR is a composite material of Tenax® TA and 30% graphite.
After conditioning and sample loading, the ends of the tubes are fitted with stainless steel caps with seals to maintain the integrity of the medium and sample.
Stronger filament posts for better filament tension and harder filament ceramic body for accurate alignment.
The following copper and gold plated copper gaskets are available for the vacuum flanges on Thermo/Finnigan mass spectrometers.
S.I.S. carries copper and gold plated copper gaskets for the Varian Saturn.
The below listed vacuum flange copper gaskets are made from OFHC copper.
The Industry Standard in Particle Optics Simulation Software Description Design new instruments or improve the sensitivity of existing instruments. Mass spectrometers and other ion optics lens systems. Calculate electric and magnetic fields from 2D & 3D models Calculate charged particle trajectories Visualize, optimize, and analyze results Extensible user programming for crazy flexibility. Free basic tech support, phone/e-mail/message board. Widely commercially and in academia, including by...
This handy wall chart can help guide you through the determination of the adsorption and desorption properties of Tenax® TA for use with your thermal desorption applications.
When ordering the Short Path Thermal Desorption System, a wide range of systems and accessories are available depending on the application requirements of the user.
The top fitting of both purge heads consists of a 1/16" fitting for the attachment of the sparging needle followed by needle adaptor to seal the needle in place and provide for the attachment of the purging gas line.
Seals are utilized in a variety of locations in the Short Path Thermal Desorption Unit.
This device is used to inject or load liquid samples directly into the S.I.S. Thermal Desorption Tubes, forcing the syringe contents onto the adsorbent resins in the desorption tube without any loss of sample due to back evaporation.
The Wheaton Purge and Trap Apparatus is widely used for the isolation of pollutants in soil, sediment, waste water, and other solid and liquid samples by purging a clean gas over and thru the sample contained therein and trapping the purged volatiles on adsorbent traps.