Product ID : 786210
786210 AutoDesorb Installation Kit for the Agilent 5890 Series II GC [Agilent 5972 and 5971 MSD with GC], includes components specific to the Agilent 5890 GC. Note: System must be operating under the Agilent GC ChemStation & MS ChemStation [Windows 95, Windows NT, or Windows XP].
More details on associated web pages:
- SIS AutoDesorb® Model 2000 Short Path Thermal Desorption System The SIS AutoDesorb® 12-sample Short Path Thermal Desorption System, for the analysis of volatiles and semi-volatiles by GC and GC/MS systems.
The SIS AutoDesorb® 12-sample Short Path Thermal Desorption System, for the analysis of volatiles and semi-volatiles by GC and GC/MS systems.
CryoTrap for the AutoDesorb System
This device is used to inject or load liquid samples directly into the S.I.S. Thermal Desorption Tubes, forcing the syringe contents onto the adsorbent resins in the desorption tube without any loss of sample due to back evaporation.
When ordering the Short Path Thermal Desorption System, a wide range of systems and accessories are available depending on the application requirements of the user.
After conditioning and sample loading, the ends of the tubes are fitted with stainless steel caps with seals to maintain the integrity of the medium and sample.
The top fitting of both purge heads consists of a 1/16" fitting for the attachment of the sparging needle followed by needle adaptor to seal the needle in place and provide for the attachment of the purging gas line.
Seals are utilized in a variety of locations in the Short Path Thermal Desorption Unit.
The Wheaton Purge and Trap Apparatus is widely used for the isolation of pollutants in soil, sediment, waste water, and other solid and liquid samples by purging a clean gas over and thru the sample contained therein and trapping the purged volatiles on adsorbent traps.
The Purge and Trap System consists of two single-ball rotameters with adjustable needle valve mounted on a nylon plastic base with an 18" long mounting rod support.
In the Short Path Thermal Desorption System, the needle serves as the transfer line for sample introduction into the Gas Chromatograph from the Glass Lined Thermal Desorption Tube containing the samples being analyzed.
This 24 tube conditioning oven is used for batch flow conditioning of both empty and packed Silco Coated SS desorption tubes as well as for the flow conditioning of the desorption tube needles.