Price: 152.5
Product ID : 900120
900120 Cryo-Trap Install Kit for Varian 3400/3600/3700 with 1075 Split/Splitless Injector, 1040 Megabore Injector, 1041 Universal Injector, 1077 Split/Splitless Capillary Injector
Description
More details on associated web pages:
SIS 1-Inch Micro Cryo-Trap
(Model 971/981)1-inch micro cryo-traps for cryo-cooling and heating (cryo-focusing) of volatiles and semivolatiles at the head of GC capillary columns.SIS 4-Inch GC Cryo-Trap
(Model 951/961)4-in long cryo-trap for cryo-cooling and heating (cryo-focusing) of volatiles and semivolatiles at the head of GC capillary columns.Cryo-Trap™ for TD-5
(Catalog C22)Micro Cryo-Trap™
(Catalog D5)GC Cryo-Trap™
(Catalog D7)

After conditioning and sample loading, the ends of the tubes are fitted with stainless steel caps with seals to maintain the integrity of the medium and sample.

(Model 971/981)
1-inch micro cryo-traps for cryo-cooling and heating (cryo-focusing) of volatiles and semivolatiles at the head of GC capillary columns.

The Desorption Tube Conditioning System is used for the flow conditioning of both empty and packed Silco Coated SS desorption tubes as well as for the flow conditioning of the desorption tube needles.

When ordering the Short Path Thermal Desorption System, a wide range of systems and accessories are available depending on the application requirements of the user.

Seals are utilized in a variety of locations in the Short Path Thermal Desorption Unit.

In the Short Path Thermal Desorption System, the needle serves as the transfer line for sample introduction into the Gas Chromatograph from the Glass Lined Thermal Desorption Tube containing the samples being analyzed.

The top fitting of both purge heads consists of a 1/16" fitting for the attachment of the sparging needle followed by needle adaptor to seal the needle in place and provide for the attachment of the purging gas line.

This device is used to inject or load liquid samples directly into the S.I.S. Thermal Desorption Tubes, forcing the syringe contents onto the adsorbent resins in the desorption tube without any loss of sample due to back evaporation.