Beware of recent phishing e-mails. Use our official contact addresses only.

Vacuum Electrical 10 Pin Electrical Feedthru

Vacuum Electrical 10 Pin Electrical Feedthru
Hover over image to zoom
Price: 0
Product ID : B08751
B08751 10 Pin Feedthru


The following electrical feedthrus can be TIG (tungsten inert gas) welded into vacuum flanges to permit transfer of electrical lines into a vacuum system. All the feedthrus are high vacuum tested to 1 x 10-9 cc/sec and can be baked to 450 degrees C. All feedthrus are suitable for TIG welding. Other feedthrus may be available on special request.

We can custom weld any of the feedthrus shown onto your instrument flanges. Please contact us for pricing. Service includes (1) drilling the hole in the flange, (2) TIG welding the feedthru in place and (3) leak testing the completed flange for vacuum down to 1 x 10-9 cc/sec. The cost of the feedthru is additional. Call or write for additional information or refer to the section of this catalog for a description of our facilities and capabilities.

10 pin electrical feedthru, E61 10 Pin Electrical feedthru, E61

This feedthru can be welded to a vacuum flange to permit the connection of 10 electrical wires into the vacuum system. This feedthru is used on some of the Finnigan mass spectrometers.