Hover over image to zoom
Price: 0
Product ID : RF075SP
RF075SP Rollerflex Vac Hose [Express ordering quantity in FEET], ID=0.75 in, OD=0.938 in, Cord=PVC
Description
More details on associated web pages:
Rollerflex Vacuum Hose PVC cord reinforced vacuum hose. Light weight, low cost, and superior corrosion resistance. Ideal for mass spec, food, and other applications.Vacuum Hose
(Catalog F42)
Rollerflex Vacuum Hose PVC cord reinforced vacuum hose.
Light weight, low cost, and superior corrosion resistance.
Ideal for mass spec, food, and other applications.
Varian 800 Thermocouple vacuum gauge control The 800 Series Thermocouple Vacuum Gauge Controls are used for repeatable, stable pressure measurement in the 10 -3 Torr to 2 Torr range.
Ion Gauge Tubes, Bayard-Alpert Type Bayard-Alpert Design and Dual Tungsten or Burn-out Resistant Iridium
Long Butt Flange In Stainless and Aluminum In Stainless and Aluminum.
The SW 110 Multi-Purpose Spot Welder & AUX Cables The versatile SW 110 multi-purpose welder occupies minimum counter space and is very lightweight and small for use in repairing small instrument parts including MS filaments.
Copper Gaskets for Vacuum Flanges The below listed vacuum flange copper gaskets are made from OFHC copper.
Varian Ion Trap Copper and Gold Plated Copper Gaskets S.I.S. carries copper and gold plated copper gaskets for the Varian Saturn.
Copper and Gold Plated Cu Gaskets for Thermo/Finnigan MS The following copper and gold plated copper gaskets are available
for the vacuum flanges on Thermo/Finnigan mass spectrometers.
Viton® Composition O-Rings O-Rings are available in five different materials from Scientific Instrument Services.
Replacement O-Ring Replacement or spare O-rings for centering rings.
Agilent (Hewlett Packard) Probe Parts SS4P4T Pump Out Valve and HP12 Probe Inlet Seal
Stainless Steel Oil Mist Eliminator Hermetic, Sealed, In-line Oil Mist Separator For Mechanical Vacuum Pumps.
Centering Ring Assembly, 304 Stainless and Aluminum Available with Viton® or Buna O-ring, this centering ring complete with O-ring should be used when joining any two NW flanges with a quick flange clamp.