908-788-5550

Thermo/Finnigan MAT Injection Port Repair

Thermo/Finnigan GC Injection Port Repairs

Hover over image to zoom

Description

Scientific Instrument Services can repair the injection ports of most gas chromatographs should the gas lines become broken or clogged or if the threads on the fittings become damaged. If your GC injection port is in need of repair and is not listed below, chances are that SIS can repair it. Contact Us with your injection port repair problems.

Thermo/Finnigan MAT 4000 GC Injection Port Repair

The welds and capillary lines on the Finnigan 4000 GC injection port system can be repaired if the welds begin to leak or if they break off. The stainless steel capillary lines can also be replaced with new stainless lines for an additional charge. After repair, all assemblies are helium leak checked.

Part No.	Description	Price EA	Order
REP391	Reweld stainless steel lines on 4000 injection port	CALL	Qty
REP3911	Reweld and replace one SS line on 4000 injection port	CALL	Qty
REP3912	Reweld and replace 2 SS lines on 4000 injection port	CALL	Qty
REP3913	Reweld and replace 3 SS lines on 4000 injection port	CALL	Qty
* Standard lead-time for non-stock items is approximately two weeks depending on the item.
Ordering information. International (non-US) prices available through your local dealer.

Finnigan MAT 5100 & MAT 9610 GC Injection Port Repair

Finnigan 5100 GC Injection Port Repaair Finnigan 9610 GC Injection Port

As with the Finnigan 4000 injection port, the injection port assembly for the Finnigan 5100 GC and 9610 GC, as well as other model GC injection ports, can be repaired. S.I.S. will reweld all broken or leaking stainless steel capillary lines or replace them with new 1/16" stainless steel capillary tubing if required. After repair all assemblies are helium leak checked.

Part No.	Description	Price EA	Order
REP392	Reweld stainless steel lines on 5100/9610 injection port	CALL	Qty
REP3921	Reweld and replace 1 SS line on 5100/9610 injection port	CALL	Qty
REP3922	Reweld and replace 2 SS lines on 5100/9610 injection port	CALL	Qty
REP3923	Reweld and replace 3 SS lines on 5100/9610 injection port	CALL	Qty
* Standard lead-time for non-stock items is approximately two weeks depending on the item.
Ordering information. International (non-US) prices available through your local dealer.

Injection Port Insert Removal

Injection Port Insert Removal

The inserts which are placed in the injection ports to allow capillary usage may get stuck and become difficult to remove. S.I.S. can remove these inserts and we will polish the outside surfaces to minimize any future problems.

Part No.	Description	Price EA	Order
REP394	Injection port insert removal	CALL	Qty
* Standard lead-time for non-stock items is approximately two weeks depending on the item.
Ordering information. International (non-US) prices available through your local dealer.

Replacement of Damaged Threads On Injection Ports

Threads

If the threads on the fittings of any model GC injection port become damaged, cross-threaded, or scored, the entire fitting can be replaced. Our repair includes cutting off the old fitting, fabricating a new fitting with threads, TIG vacuum welding the fitting to the injection port body, and helium leak checking the finished injection port to assure leak-free operation.

Part No.	Description	Price EA	Order
REP393	Replacement of threaded fitting	CALL	Qty
* Standard lead-time for non-stock items is approximately two weeks depending on the item.
Ordering information. International (non-US) prices available through your local dealer.

Custom Repair or Modification Of GC Injection Ports

Our shops have the capabilities to repair or modify any GC Injection Port. A complete description of our shop facilities is described in the front of this catalog. For a quote, please write us or send us your drawings or schematics.