Glass Dropping Bottles
- Oil Sample (This Page)
Redi-Pak® Clear Oil Sample Bottles
This 4 oz. jar is excellent for process sampling in the petrochemical
and refinery industries. With cork plug.
Manufactured from Wheaton "800" glass (meets USP Type III standards).
For all your laboratory and field sampling needs.
- Ideal for process sampling in the petrochemical and refinery industries
- Easily transportable from the field to the lab
- Manufactured by Wheaton to the highest standards of quality and precision
- Convenience packed - 1-4 dozen bottles per carton
- Closures are attached in our Cleanpack facility ensuring safety and cleanliness
- Santovac 5 polyphenyl ether vacuum pump fluid Part #SV100 - Santovac 5, Size=100 cc bottle Santovac 5 - 100ML Bottle $990+
Santovac 5 has been the fluid of choice for diffusion
- Nylon Gloves Part #G288M - Medium Nylon Gloves Nylon Gloves-Medium Pair Case=24 Pairs $1.95+
Nylon, lint free, durable, and ambidextrous.
Notes: Multiplier horn only (no frame).DeTech 2300 Electron Multiplier for Agilent 5975*/5973/5972/5971/1100 Part #2300 - Detech 2300 Electron Multiplier Replacement Horn Agilent #05971-80103 $539+
For instruments: Agilent 5975 MSD (without TAD), 5973/A/N, 5972/A, 5971/A, 5970/A/B, 1100 LC-MSD.
- Steel Wire Reinforced Vacuum Hose Part #H50 - Steel Wire Reinforced Vacuum Hose, Id (in)=0.50, Od (in)=0.748 Wire Reinforce Vac .50" .500" Id $2.73+
This food and beverage grade, crystal clear PVC tubing is reinforced with 110 ton psi steel spring wire.
- Agilent (Hewlett Packard) Part Number Cross Reference Part #275071 - 1/8in Npt Convectron Gauge Tube (Hp #0960-0540) 1/8 Npt Convectron Tube Hp#0960 0540 $47.30+
Scientific Instrument Services carries a wide selection of parts for all models of Agilent (Hewlett Packard) mass spectrometers. In order to aid you in the selection of replacement parts for your instrument, the following part number cross reference chart can be used. If a part number is not listed, it either means we do not have that part in our inventory or perhaps we are not aware of the Agilent part number in relation to our inventory. If you are looking for a part not listed below, give us
- Granville-Phillips Vacuum Gauge Controller Part #275071 - 1/8in Npt Convectron Gauge Tube (Hp #0960-0540) 1/8 Npt Convectron Tube Hp#0960 0540 $1895+
Granville-Phillips 340 Vacuum Gauge Controller (VGC) measures pressure from less than 1 x 10-9 Torr to atmosphere, utilizing an ionization gauge and two Convectron gauges.
- Convectron Series 275 Vacuum Gauge Part #275071 - 1/8in Npt Convectron Gauge Tube (Hp #0960-0540) 1/8 Npt Convectron Tube Hp#0960 0540 $245+
The Granville Philips Convectron Gauge tube used on the 5971 & 5972 mass spectrometers is available from S.I.S. This is a direct replacement for the HP original and screws into the fitting shown above.
- SGE Graphitized Vespel® Ferrules Part #072663 - Gvf16-004 Vespel Ferrule Pkt10 $41+
Vespel® ferrules contain 15% graphite and are ideal for glass and fused silica capillary columns.
- SGE Ferrules for GC Part #072663 - Gvf16-004 Vespel Ferrule Pkt10 $47+
standard graphite ferrules (for GC applications)
- Ion Gauge Tubes, Bayard-Alpert Type Part #G100P - Ion Gauge Tube, 1inch Pyrex Iridium Ion Gauge Tube 1" Pyrex $119.50+
Bayard-Alpert Design and Dual Tungsten or Burn-out Resistant Iridium
- 820950919 Part #820950919 - Agilent Zorbax normal-Phase Guard Cartridges, Id (mm)=4.6, Length (mm)=12.5, Particle Size (um)=5, Stationary Phase=Rx-Sil Rx-Sil Guard Cartridges 4.6x12.5 4/Pk $185+
- 8111136 Part #8111136 - Welsh Wp3 1-20 Nw25 Port Welsh 8912 pump For Welsh W3 Vacuum Pump $95.25+
- 880975901 Part #880975901 - Agilent Zorbax Normal-Phase Hplc Columns, Id (mm)=4.6, Length (mm)=250, Particle Size (um)=5, Stationary Phase=Rx-Sil Rx-Sil Analytical Hplc Column 4.6 x 250 $587+