B7
Agilent 5970 MSD
®
Accessories by S.I.S.
TM
Scientific Instrument Services, Inc.
TM
FAX: 908-806-6631
www.sisweb.com/catalog/08/B7
Part No.
Agilent No.
Description
Price ea. 6 or more
05990-60084
MSD Filament
Ion Gauge Tube for MSD
Our standard G75K ion gauge tube with
metal side arm with Kovar seal is the stan-
dard Bayard-Alpert ion gauge used on all
Agilent mass spectrometers (Agilent #0960-
0376).
Agilent 5970 Entrance Lens Repair
The spotwelds holding the two parts
together can break loose. S.I.S. can clean
both parts and reweld them together. This can
easily be done on a rush basis, if necessary.
Call for information on HP5985 Entrance
Lens Repair.
MSD Filaments
S.I.S. manufactures the filaments for the MSD. These fila-
ments are exact retrofits for the original Agilent filament
(Agilent#05990-60084). Each filament is accurately aligned and
tensioned for optimum performance.
MSD Ceramic Insulators
These ceramic source insulators are constructed from high
purity alumina ceramic.
Electron Multiplier for 5970 MSD
Electron multipliers for the HP5970 MSD
are available from Burle*, ETP and DeTech.
Each of the multipliers listed below comes
with a manufacturer's warranty and includes
installation instructions. See the electron
multiplier section of this catalog for more
details on each of the multipliers listed below
Part No.
Description
DeTech Electron Multiplier
Burle Electron Multiplier
ETP Electron Multiplier
Part No.
Description
Entrance Lens Repair
Vacuum Pump All In One
Filter Kits
Combination oil mist eliminator
and charcoal filter.
See page F42 - F46
for complete details.
Part No.
Description
Filter Kit for E1M5/8,
E2M3/5/8 and RV3/5/8/12
Filter Kit for E2M 1.5
Charcoal Filter Element
Coalescing Filter Element
Part No.
Agilent No.
10 or more
05990-20217
05990-20218
05990-20216
ION GAUGE
ION GAUGE
Part No.
Agilent No.
Description
0960-0376
3/4" Kovar Ion Gauge Tube
Part No.
Agilent No.
Description
05990-20136
Agilent 5970 Repeller Insulator
Detech Multiplier
Agilent 5970 GC/MS Interface Gaskets
The nickel gasket (Agilent #0100-1145) used in the Agilent
5970 capillary direct interface is available from SIS. This is an
exact replacement for the Agilent original. We also offer this gas-
ket in copper which is slightly softer for easier sealing.
Edwards E2M 1.5 Vacuum Pumps
Edwards E2M 1.5 pumps are used on the Agilent MSD
systems. Model HPP7011MSD includes the special power cord
which plugs into the MSD console. All other models have
standard power
Part No.
Agilent #
Description
10 or more
0100-1145
Nickel Gasket
for 5970 Interface
Copper Gasket
for 5970 Interface
Part No.
Description
Edwards Model E2M 1.5
Edwards Model E2M 1.5
with MSD power cord.
Some other Agilent 5970 MSD parts may be available from SIS. Call for price and availability.
Vespel
®
Repeller Insulator
Vespel Insulator used in the 5970
Repeller.
*When "Burle" is indicated, it is intended to imply "Photonis USA, Inc."
tip...