Home
- ▶
- Heaters/Source
- ▶
- Agilent Heaters and SensorsMass Spectrometry, Scientific Supplies & ManufacturingScientific Instrument Services 5973 Source Heater Tamper Resistant Allen Wrench 5973/5975 Quad Sensor 5985 Source Heater Assembly Agilent Interface Heater Assembly 5971 Interface Heater
- ▶
- VacuumPumps Oils/Greases Gauge & Tubes Hose & Accessories Filters - Oil/Charcoal Foreline Traps Gaskets & Material Fittings O-Rings Pump Parts (Precision Plus) Quality Monitor System Distillation Control Acoustic Enclosures For Rotary Vane Pumps Other Vacuum Accessories Digital Vacuum pressure regulator (VPC) Catalog Page F1
- ▶
- Gaskets & Material
- ▶
- Silver Tin Wire (This Page)
Hover over image to zoom
Description
96% Tin, 4% Silver, 0.031" and 0.062" diameters.
This wire can be used for the fabrication of O' Ring gaskets on instruments such as the Dupont Mass Spectrometers which do not utilize heated flanges. It provides an inexpensive substitute for the gold wire gaskets on vacuum instruments. This material should not be used for gaskets on heated flanges above 152 degrees C.
For high temperature applications use Gold Wire Ring Gaskets (discontinued).
| 96% Tin, 4% Silver Wire for Gasket Fabrication | ||||
| Part No. | Length (ft) | Diameter (in) | Price /PK |
Order |
|---|---|---|---|---|
| TSWA | 100 | 0.031 | CALL | |
| TSWR | 400 | 0.031 | CALL | |
| TSWX | 25 | 0.062 | CALL | |
| Unit of measure for ordering is PK. | ||||
| * Standard lead-time for non-stock items is approximately two weeks depending on the item. | ||||
Ordering information.
International (non-US) prices available through your
local dealer.
|
||||
Silver-Tin Gaskets can be fabricated by S.I.S. in diameters up to 6" ID at prices as low as $4.00 each. Call for details.
Micro-Mesh® Sheet Kits Micro-Mesh® Craftsman Kits
Disposable Lint Free Essential Cloths/Wipes Wipes are disposable, 100% cellulose, lint-free cloths designed for cleaning areas where non-contamination is essential.