Scientific Instrument Services, Inc.  Supplies and Services for Mass Spectrometers, Gas Chromatographs, and Liquid Chromatographs.
Contact Us view shopping cart
News: New 2014 catalog, NIST 14, new products, Nanoliter MALDI/TOF dispensing, heater transfer tube for Thermo, NE300 syringe pump, ...
SIS Print Catalog
A - General Mass Spectrometer Supplies
A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 A22 A23 A24 A25 A26 A27 A28 A29 A30 A31 A32 A33 A34 A35 A36 A37 A38 A39 A40 A41 A42 A43 A44 A45 A46 A47 A48 A49 A50 A51 A52 A53 A54 A55 A56 A57 A58 A59 A60 A61 A62 A63 A64 A65 A66 A67 A68 A69 A70 A71 A72 A73 A74 A75 A76
B - Mass Spectrometer Instrument Supplies
C - Thermal Desorption
D - Gas Chromatography
E - Liquid Chromatography
F - Vacuum System Supplies
G - General Laboratory and Cleaning Supplies
H - Index
This page categories:
[MS
| Other Instruments]
Catalog Section
Show All Products
Product Filters
Filter by section:
GC (93)
, LC (210)
, Lab/Clean (282)
, MS (796)
, Service/Repair (138)
[no image available]
, Software (25)
, TD (76)
, Vacuum (303)
,
Filter by category:
APPI (1)
[no image available]
, Adaptors (9)
, Balances (2)
, Bottles (85)
, Calibration Compounds (8)
, Cleaning (66)
[no image available]
, Cryo-Trap (10)
, Databases (10)
, Diffusion Pumps (13)
, Dropper (6)
, Electrospray/ESI (26)
, FAB (11)
, Ferrules (17)
, Filaments (80)
, Filters (40)
, Fittings (44)
, Flanges (40)
, Flow Meters (2)
, Flow Splitters (23)
, Fluids (11)
, Fuses (3)
, GC Accessories (46)
[no image available]
, GC Columns (36)
, Gas Generators (4)
[no image available]
, Gas Regulators (4)
[no image available]
, Gaskets (18)
, Gloves (4)
, Grease/Wax (7)
, HPLC Accessories (112)
[no image available]
, HPLC Columns (22)
, HPLC Tubing (2)
[no image available]
, Heaters/Source (74)
, Homogenizer (5)
, Inject Port Liners (8)
, Insulators (27)
, Jet Separators (10)
, MALDI (5)
[no image available]
, Micro-Mesh Abrasives (32)
, Microscopes (1)
, Moisture Analyzers (2)
, Multipliers (230)
, O-Rings (25)
, Oil (16)
, Part Number Cross Reference (2)
[no image available]
, Probes (42)
, Repair (91)
[no image available]
, Septa (2)
, Source Cleaning (15)
, Swabs (2)
, Swagelok (2)
[no image available]
, Syringe Pumps (69)
, Syringes (17)
, Temperature Sensors (31)
, Temperature/Shock Indicators (104)
, Tools (10)
, Transfer Line (13)
, Traps (10)
, Tubing (11)
[no image available]
, Ultrasonic Cleaners (1)
, Vacuum Hose (7)
, Valves (7)
[no image available]
, Vials (17)
, Wire (35)
[no image available]
, Other (381)
[no image available]
,
Filter by material:
Amber (4)
[no image available]
, Buna (1)
[no image available]
, Ceramic (36)
, Clear (9)
[no image available]
, Glass (26)
[no image available]
, Gold (14)
[no image available]
, HDPE (1)
[no image available]
, Kalrez (1)
[no image available]
, LDPE (5)
[no image available]
, PET (4)
[no image available]
, PTFE (8)
[no image available]
, Plastic (42)
[no image available]
, Rhenium (5)
[no image available]
, Silicone (2)
[no image available]
, Silver (4)
[no image available]
, Viton (5)
[no image available]
, Yttria (2)
[no image available]
,
Filter by instrument:
Agilent (179)
[no image available]
, Amptek (1)
[no image available]
, Anelva (4)
[no image available]
, Balzers (6)
[no image available]
, Bear (3)
[no image available]
, Bruker (4)
[no image available]
, Cameca (4)
[no image available]
, Ciphergen (2)
[no image available]
, Comstock (1)
[no image available]
, DuPont (14)
[no image available]
, Extrel (17)
[no image available]
, FEI (2)
[no image available]
, Hiden (5)
[no image available]
, Hitachi (5)
[no image available]
, Inficon (13)
[no image available]
, JEOL (8)
[no image available]
, Kratos (22)
[no image available]
, LKB (3)
[no image available]
, Mass Analyzer Products (2)
[no image available]
, McCallister (2)
[no image available]
, Nermag (8)
[no image available]
, Omicron (4)
[no image available]
, PerkinElmer (30)
[no image available]
, Sciex/AB (16)
[no image available]
, Seiko (1)
[no image available]
, Sensar (1)
[no image available]
, Shimadzu (17)
[no image available]
, Standford (2)
[no image available]
, Thermedics (1)
[no image available]
, Thermo/Finnigan (220)
[no image available]
, UTI/MKS (11)
[no image available]
, V&F (1)
[no image available]
, Varian (35)
[no image available]
, Vestec (13)
[no image available]
, Waters/Micromass/VG (59)
[no image available]
,
Filter by brand:
Adixen (16)
, Detech (87)
, ETP (44)
[no image available]
, Edwards (20)
, Greenwood (1)
, Imtakt (16)
, Inland (6)
, KD Scientific (51)
, Koby (10)
, New Era (18)
, New Objective (26)
, Next-Advance (14)
, Optimize (11)
[no image available]
, Photonis (87)
, Precision Plus (18)
, SGE (59)
, Telatemp (104)
[no image available]
, Valcobond (13)
, Wheaton (79)
, Wiley (4)

SIS supplies over 20,000 parts and services for mass spectrometry, chromatography, vacuum, and other scientific equipment.

SIS Catalog Online >> Page Number: [ previous page next page ]
[ General Mass Spectrometer Supplies | Index] Zoom: [PDF icon Printable PDF]
Ordering: Click part number to add to shipping cart. Contact your Local Dealer for non-US prices.
background image

Probe Inlet System

The SIS™ Probe Inlet System mounts on the GC/MS Transfer line

port on the Agilent 5973, 5975, & 5977 MSD to permit the quick and

easy introduction of the SIS 1/4" diameter direct probe through the

MSD vacuum manifold and into the MSD source. It incorporates an

indexed dual guide rod system that accurately guides the probe

through the vacuum system valves. The guide rods are indexed at

three positions in addition to the fully inserted and fully extracted

positions.

Load - fully extended - probe load position

Stop 1 - at the first vacuum seal - to permit the rough pump-out of

the probe inlet seals

Stop 2 - at the second vacuum seal - to enable the user to open

the isolation valve

Stop 3 - 1 cm from the source - cooling position after the

sample is finished

Run - fully inserted - sample analysis Run position

After the probe locks in at one of the indexed stop positions, the

lock release lever is pulled up to enable the probe to be inserted to

the next indexed position. This accurate positioning and locking of

the probe in set positions prevents closing the isolation valve on

the probe (which would score or bend the probe rod).

The probe sealing system consists of the SIS dual PTFE sealing

system which will provide for excellent vacuum sealing around the

probe rod along with long seal life. If the seals need to be replaced

a seal extraction tool is included to enable the quick removal and

replacement of the seals without venting the MSD. The 1/4" turn

ball isolation valve permits the introduction of the probe through this

valve and into the MSD source.

PC Window for the Control of the SIS Direct Probe

for the Agilent 5973 & 5975 MSD

The user interface for the control and monitoring of the direct

probe for the Agilent 5973 & 5975 probe is via software on the PC.

This window is fully integrated with the Agilent ChemStation™ soft-

ware (check with us for version compatibility) or can be used inde-

pendently. The PC software controls the direct probe electronics

console via an RS232 interface to download the values entered

through the PC window to control the actual temperature of the

probe. The probe can be operated in the ballistic mode with ramp

rates greater than 500° per minute. In the programmable mode the

user inputs the ramp rate, the final temperature and the duration

time (hold time). Temperature program rates up to 400° per minute

can be used to control the temperature of the probe between 25

and 450°C. Up to 25 levels of programmable ramping steps are

permitted through this PC interface. A visual graphic presentation

of the temperature profile indicates the ramp and hold temperatures

as a function of time. In addition the status portion of the screen

shows the probe status, time of analysis, the target and actual

probe temperatures and the power requirements to heat the probe

(Heating Load). Controls are also present to permit the start and

cool down (stop) of the probe from the PC window. These start and

stop manual controls are also available on the front of the electron-

ics console. In addition to heating the probe, the probe is automat-

ically cooled at the end of the sample analysis using compressed

air controlled by a solenoid valve in the direct probe electronics con-

sole. This will cool the probe to enable the removal of the probe

through the vacuum sealing system.

The probe inlet system (Part #HPP7 Part #HPP7--Click to order
Current Price: $9900.00
Unit of Measure: EA
Est. Ship Weight=50 lbs
Not in stock. Standard lead time for out-of-stock items is approximately two weeks.
)
includes the direct probe, the

probe inlet, probe controller, software, vacuum pump, tools

and other accessories.

A49

Direct Insertion Probe for Agilent 5973, 5975 & 5977*

FAX: 908-806-6631

www.sisweb.com

Part No.                    Description                                   

HPP7 Part #HPP7--Click to order
Current Price: $9900.00
Unit of Measure: EA
Est. Ship Weight=50 lbs
Not in stock. Standard lead time for out-of-stock items is approximately two weeks.
                      

Probe Inlet System                            

S12A Part #S12A--Click to order
Current Price: $105.00
Unit of Measure: PK
Est. Ship Weight=0.25 lbs
Not in stock. Standard lead time for out-of-stock items is approximately two weeks.
                    

Flared Sample Vials, 100                    

S12C Part #S12C--Click to order
Current Price: $498.00
Unit of Measure: PK
Est. Ship Weight=0.25 lbs
Not in stock. Standard lead time for out-of-stock items is approximately two weeks.
                    

Flared Sample Vials, 500                    

S12B Part #S12B--Click to order
Current Price: $945.00
Unit of Measure: PK
Est. Ship Weight=0.25 lbs
Not in stock. Standard lead time for out-of-stock items is approximately two weeks.
                    

Flared Sample Vials, 1000                  

HPP7007 Part #HPP7007--Click to order
Current Price: $79.00
Unit of Measure: PK
Est. Ship Weight=0.25 lbs
Quantity in Stock=45
                  

Replacement Inlet Seal Set                  

Ordering Information

SIS Probe Control

Run Stop 3

Stop 2

Stop 1 Load

Probe

Sealing

System

Mass Spec Probe

Mounting Bracket

Pump Out Valve

Knurled Nut

O’Ring

Seal

O’Ring

Seal

MSD

Flange

Mount

Isolation

Ball Valve

PTPE

Vacuum

Seal

PTPE

Vacuum

Seal

Delrin

Insert

Vent

Spacer

Related information may be found on the following pages of our web site:
PageParts
HPP7: Direct Probe Inlet System Ordering InformationHPP7007, HPP7, S12A, S12B, S12C
Page Number: [ previous page next page ]
Send comments on this page
Contacting our Customer Service Department--comments, questions, or anything can\'t find?
Call, e-mail, FAX, or type your comments below:
Contact details (optional, but required for us to reply or quote):
Name: Organization/Country:
Email: Phone/fax:
E-mail replies normally expected within one business day.
FAX: (908)806-6631;   WEB: www.sisweb.com
© 1996-2014 Scientific Instrument Services, Inc. [ Terms | Trademarks | Privacy ]
CUSTOMER SERVICE: Contact Us PHONE: 1-(908)788-5550 1-(908)-788-5550 (M-F, 8am-5:30pm EST New Jersey); E-MAIL: ????????????? ; Outside US: international dealers; Scientific Instrument Services, 1027 Old York Rd., Ringoes, NJ 08551-1054.