Scientific Instrument Services, Inc. Supplies and Services for Mass Spectrometers, Gas Chromatographs, and Liquid Chromatographs.
Contact Us view shopping cart
Search:
search by keywords or part number (e.g. "G75K")
SIS Catalog Online >> Page Number: [ previous page next page ]
[ Gas Chromatography | Index] Zoom: [PDF icon Printable PDF]
Ordering: Click part number to add to shipping cart. Contact your Local Dealer for non-US prices.
Pages in this section: D76 D77 D78
background image
SGE Autosampler Syringes
D78
Scientific Instrument Services, Inc.
™
Phone: 908-788-5550
www.sisweb.com/catalog/08/D78
SGE Syringe Cleaner
G
host peaks or cross contamination can be caused by
a "dirty" needle.
The SGE syringe cleaner ensures organic sample residues
are completely vaporized out of the needle and is particularly
useful for type B plunger-in-needle syringes.
A feature of the unit is that it has a very short warm-up peri-
od of approximately 30 seconds to reach the operating tempera-
ture of 250°C. Effectively, this means the unit does not have to
be always switched on although it is thermostatically controlled
for continuous use if required.
A vacuum source of approximately 10 Torr from a water pump
or mechanical pump should be connected to the unit.
Operation is simple. Insert the needle through the 10mm
septum into the heated zone, hold for about 30 seconds and then
pump the plunger a few times. Organics are vaporized and
pumped away from the needle, leaving it clean and free from con-
taminant’s.
The cleaner will accept needles up to 1mm OD and 100mm
long.
Solid Injectors
Two interchangeable plungers are supplied with each injec-
tor. One plunger, which has a spiral tip, is used for injection of
solids. The sample is deposited on the spiral with a syringe, the
solvent evaporated and the residual solid then injected into the
GC.
The other flat tipped plunger is for solid samples in the form
of granules, fibers or powders which can be packed into the bore
of the needle with the plunger retracted. Alternatively, samples
can be bored out with the sharp needle tip, e.g. plastic sheeting,
paper, foil and so on.
Pelletizer
The device is for producing micro-pellets which can be trans-
ferred into the bore of an SGE solid injector.
Stylet Wires
These are for cleaning Type A needles and are also ideal for
cleaning recorder pens and so on. Four sizes are offered: 0.10,
0.15, 0.20 and 0.25mm.
Syringe Rack
It helps to organize your syringes and minimize breakages.
SGE Needle Cleaning Kit
This kit provides the necessary items used to clean blocked
needles in all Type A syringe needles.
A range of stylet wires, tweezers for holding these and a non-
ionic surfactant material are provided in a convenient size pack-
et.
The kit can also be used to clean out ink reservoir recorder
pens.
Part No.
Item
Description
031780 Part #031780--Click to request quote
DISCONTINUED
Unit of Measure: EA
Est. Ship Weight=0.25 lbs
SCK/110
Syringe Cleaner 110-120 volts
031781 Part #031781--Click to request quote
DISCONTINUED
Unit of Measure: EA
Est. Ship Weight=0.25 lbs
SCK/220
Syringe Cleaner 220-240 volts
Part No.
Item
Description
Price / 5 pk
031745 Part #031745--Click to order
Current Price: $9.50
Unit of Measure: EA
Est. Ship Weight=0.25 lbs
Not in stock. Standard lead time for out-of-stock items is approximately two weeks.
SW10
5 x 15cm wires for 5, 10µl syringes
031746 Part #031746--Click to order
Current Price: $9.50
Unit of Measure: EA
Est. Ship Weight=0.25 lbs
Not in stock. Standard lead time for out-of-stock items is approximately two weeks.
SW15
5 x 15cm wires for 15, 25, 50µl syringes
031747 Part #031747--Click to order
Current Price: $9.50
Unit of Measure: EA
Est. Ship Weight=0.25 lbs
Not in stock. Standard lead time for out-of-stock items is approximately two weeks.
SW20
5 x 15cm wires for 1 ml and over
Needle Length Plunger OD
Part No.
Description
(mm)
(mm)
009980 Part #009980--Click to order
Current Price: $177.00
Unit of Measure: EA
Est. Ship Weight=0.25 lbs
Not in stock. Standard lead time for out-of-stock items is approximately two weeks.
Solid Injector
70
0.5
009988 Part #009988--Click to order
Current Price: $59.00
Unit of Measure: EA
Est. Ship Weight=0.25 lbs
Not in stock. Standard lead time for out-of-stock items is approximately two weeks.
Pyrojector II pelletiser injector
Part No.
Item
Description
031775 Part #031775--Click to order
Current Price: $0.00
Unit of Measure: EA
Est. Ship Weight=0.25 lbs
Not in stock. Standard lead time for out-of-stock items is approximately two weeks.
4SR
Holds four syringes
Part No.
Item
Description
031782 Part #031782--Click to order
Current Price: $62.00
Unit of Measure: EA
Est. Ship Weight=0.25 lbs
Not in stock. Standard lead time for out-of-stock items is approximately two weeks.
NCK
Needle cleaning Kit
Page Number: [ previous page next page ]
back to top
Send comments on this page
Contacting our Customer Service Department--comments, questions, or anything can't find?
Call, e-mail, FAX, or type your comments below:
Contact details (optional, but required for us to reply or quote):
Name: Organization/Country:
Email: Phone/fax:
Regular business hours - 8:00 AM to 5:30 PM EST, M-F. E-mail replies normally expected within one business day.
PHONE: (908)788-5550;   FAX: (908)806-6631;   E-MAIL:
WEB: www.sisweb.com
ADDRESS: Scientific Instrument Services, 1027 Old York Rd., Ringoes, NJ 08551-1054.
© 1996-2012 Scientific Instrument Services, Inc. [ Terms | Trademarks | Privacy ]
SIS Newsletter
Covers SIS products, services, promotions, news, and other mass spectrometer related information.