FeaturesFor Non-Hazardous/Non-Corrosive Applications
- Eliminate 99.9% oil mist and smoke from vacuum pump exhaust
- Prevent oil accumulation in ductwork
- Recover expensive lubricating oils, and automatically return filtered oil to pump
- Eliminate potential OSHA and EPA violations
DescriptionBalston Vacuum Pump Exhaust Filters remove all visible oil mist and smoke from vacuum pump exhaust, even when it is saturated with oil. The high efficiency filter cartridge continuously drains the collected liquid, allowing the user to recover expensive lubricating fluid. Filters are available for pumps with flow ratings ranging from 3 to 850 cfm (5-1440 m3/h).
|Max Temp||250 degrees F|
|Max Pressure||15 PSI|
|995612371H||VACUUM PUMP EXHAUST FILTR FOR HP5973. Single Filter.||18||EA||$88.50|
|995512371H||Balston Vac Pump Exhaust Filter 3 CFM flow rate, 1/2in NPT port||34||EA||$69.00|
|320016371H||REPLACEMENT FILTERS PKG/3 DELIVERY 1 WEEK||0*Standard lead-time for non-stock items is approximately two weeks depending on the item.||PK||$262.85|
|14175||NW25 Adaptor Fitting||0*Standard lead-time for non-stock items is approximately two weeks depending on the item.||EA||$187.65|
|14173||NW25 Adaptor Fitting||0*Standard lead-time for non-stock items is approximately two weeks depending on the item.||EA||$210.00|
|* Standard lead-time for non-stock items is approximately two weeks depending on the item.|
|Ordering information. International (non-US) prices available through your local dealer.|
- Balston Vacuum Pump Exhaust Filters Balston Vacuum Pump Inlet and Exhaust Filters
Inland 45 is the highest quality rough pump oil you can use for your mass spectrometer.
Industry standard die-cast aluminum clamp.
SIS offers a direct replacement for Agilent p/n G1099-60104. Same performance at a fraction of the cost
Get a DeTech 2300 Electron Multiplier here. Used in Agilent 5975 MSD (without TAD)/5973/5972/5971/5970/1100 LC-MSD mass spectrometers and backed by a 100% no-nonsense warranty. Developed by Detector Technology, Inc.
Available with Viton® or Buna O-ring, this centering ring complete with O-ring should be used when joining any two NW flanges with a quick flange clamp.