Catalog D16-D17
Home
- ▶
- Heaters/Source
- ▶
- Agilent Heaters and SensorsMass Spectrometry, Scientific Supplies & ManufacturingScientific Instrument Services 5973 Source Heater Tamper Resistant Allen Wrench 5973/5975 Quad Sensor 5985 Source Heater Assembly Agilent Interface Heater Assembly 5971 Interface Heater
- ▶
- Instrument Tubing
- ▶
- Gas RegulatorsModel 3530 Series - Single Stage Purity Brass Regulator Model 3510 Series - Single Stage High Purity Stainless Steel Regulators Model 3120 Series - Dual Stage Purity Brass Regulator Model 3810 Series - Dual Stage High Purity Stainless Steel Regulators Tescom Gas Line Regulators 3420 Series Tescom Gas Line Regulators 3450 Series Concoa In-Line Regulators Model 304 Series Concoa In-Line Regulators Model 324 Series
- ▶
- GCColumns Fused Silica Tubing Instrument Tubing Injection Port Liners Septa by Manufacturer SIS GC Cryo-Traps Ferrules Valves Swagelok® Fittings Pyrolysis Probe Accessories Gas Generators Gas Regulators Gas Purifiers and Filters Syringes SGE MEPS™-Micro Extraction by Packed Sorbent Purge and Trap System SGE SilFlow™ Stainless Steel Micro-Fluidic Platform Accessories NIST GC RI Library Other GC Supplies Catalog Page D1
- ▶
- GC Ferrules
- ▶
- SGE Graphitized Vespel Ferrules® 350 °C-GVF (This Page)
Hover over image to zoom
Description
the Standard for GC/MS
These Vespel® ferrules contain 15% graphite and are ideal for glass and fused silica capillary columns. Because these ferrules are harder, they do not distort and flow as much as other types and are ideal for butt type connections where the flowpath might need to be disconnected. For connecting fused silica tubing we recommend a ferrule size slightly larger than the O.D. of the column to be selected. No-hole ferrules are available and can be drilled to suit a particular application or to seal off a fitting. Two-hole ferrules can be utilized to split the column effluent between two detectors or one detector and a collector. The two-hole ferrule can also be used for inlet splitting between two fused silica columns. Three-hole ferrules are also available for multiple splitting. To suit the SGE range of mini unions, special small graphitized vespel ferrules are available.
Graphitized Vespel® Sealing Rings 350 °C (SGE Fitting Only) - VSR
Specifically shaped for SGE 1/16”, 1/8” and 1/4” stainless steel union they are supplied as standard with a number of SGE products. Back ferrules are not required.
| Part No. | Order Code | Fitting Size | Hole Size | W(mm) | L(mm) | Quantity In Stock |
Price /PK |
Order | |
|---|---|---|---|---|---|---|---|---|---|
| Standard | |||||||||
| 072661 | SGE GVF Ferrules - per pack of 10 | ||||||||
| GVF16-000 | 1/16" | no hole | 3.2 | 3.7 | 0*Standard lead-time for non-stock items is approximately two weeks depending on the item. | $52.90 | |||
| 0726632 | SGE GVF Ferrules - per pack of 10 | ||||||||
| GVF16-002 | 1/16" | 0.2 mm | 3.2 | 3.7 | 0*Standard lead-time for non-stock items is approximately two weeks depending on the item. | $78.50 | |||
| 072659 | SGE GVF Ferrules - per pack of 10 | ||||||||
| GVF16-003 | 1/16" | 0.3 mm | 3.2 | 3.7 | 3 | $74.90 | |||
| 072663 | SGE GVF Ferrules - per pack of 10 | ||||||||
| GVF16-004 | 1/16" | 0.4 mm | 3.2 | 3.7 | 5 | $55.10 | |||
| 072654 | SGE GVF Ferrules - per pack of 10 | ||||||||
| GVF16-005 | 1/16" | 0.5 mm | 3.2 | 3.7 | 1 | $52.90 | |||
| 072655 | SGE GVF Ferrules - per pack of 10 | ||||||||
| GVF16-008 | 1/16" | 0.8 mm | 3.2 | 3.7 | 6 | $52.90 | |||
| 072658 | SGE GVF Ferrules - per pack of 10 | ||||||||
| GVF16-009 | 1/16" | 0.9 mm | 3.2 | 3.7 | DISCONTINUED | --- | --- | ||
| 072656 | SGE GVF Ferrules - per pack of 10 | ||||||||
| GVF16-0010 | 1/16" | 1.0 mm | 3.2 | 3.7 | 0*Standard lead-time for non-stock items is approximately two weeks depending on the item. | $52.90 | |||
| 072657 | SGE GVF Ferrules - per pack of 10 | ||||||||
| GVF16-16 | 1/16" | 1/16" | 3.2 | 3.7 | 1 | $55.10 | |||
| 072660 | SGE GVF Ferrules - per pack of 10 | ||||||||
| GVF16(2)-003 | 1/16" (2 hole) | 2 x 0.3 mm | 3.2 | 3.7 | 0*Standard lead-time for non-stock items is approximately two weeks depending on the item. | $81.20 | |||
| 072662 | SGE GVF Ferrules - per pack of 10 | ||||||||
| GVF16(2)-004 | 1/16" (2 hole) | 2 x 0.4 mm | 3.2 | 3.7 | 0*Standard lead-time for non-stock items is approximately two weeks depending on the item. | $81.70 | |||
| 072664 | SGE GVF Ferrules - per pack of 10 | ||||||||
| GVF16(2)-005 | 1/16" (2 hole) | 2 x 0.5 mm | 3.2 | 3.7 | 0*Standard lead-time for non-stock items is approximately two weeks depending on the item. | $81.20 | |||
| 0726640 | SGE GVF Ferrules - per pack of 10 | ||||||||
| GVF16(2)-005-003 | 1/16" (2 hole) | 0.5 x 0.3 mm | 3.2 | 3.7 | 0*Standard lead-time for non-stock items is approximately two weeks depending on the item. | $81.20 | |||
| 0726641 | SGE GVF Ferrules - per pack of 10 | ||||||||
| GVF16(2)-004-003 | 1/16" (2 hole) | 0.4 x 0.3 mm | 3.2 | 3.7 | 0*Standard lead-time for non-stock items is approximately two weeks depending on the item. | $81.20 | |||
| 0726642 | SGE GVF Ferrules - per pack of 10 | ||||||||
| GVF16(2)-005-004 | 1/16" (2 hole) | 0.5 x 0.4 mm | 3.2 | 3.7 | DISCONTINUED | --- | --- | ||
| 072665 | SGE GVF Ferrules - per pack of 10 | ||||||||
| GVF16(3)-004 | 1/16" (3 hole) | 3 x 0.4 mm | 3.2 | 3.7 | 7 | $95.80 | |||
| 072670 | SGE GVF Ferrules - per pack of 10 | ||||||||
| GVF8-000 | 1/8" | no hole | 6.4 | 7.4 | DISCONTINUED | --- | --- | ||
| 0726701 | SGE GVF Ferrules - per pack of 10 | ||||||||
| GVF8-16 | 1/8" | 1/16" | 6.4 | 7.4 | 10 | $65.90 | |||
| 072669 | SGE GVF Ferrules - per pack of 10 | ||||||||
| GVF8-8 | 1/8" | 1/8" | 6.4 | 7.4 | DISCONTINUED | --- | --- | ||
| 0726703 | SGE GVF Ferrules - per pack of 10 | ||||||||
| GVF8-04 | 1/8" | 0.4 mm | 6.4 | 7.4 | DISCONTINUED | --- | --- | ||
| 0726702 | SGE GVF Ferrules - per pack of 10 | ||||||||
| GVF8-05 | 1/8" | 0.5 mm | 6.4 | 7.4 | DISCONTINUED | --- | --- | ||
| 072671 | SGE GVF Ferrules - per pack of 10 | ||||||||
| GVF8-08 | 1/8" | 0.8 mm | 6.4 | 7.4 | DISCONTINUED | --- | --- | ||
| 0726700 | SGE GVF Ferrules - per pack of 10 | ||||||||
| GVF8-2.4 | 1/8" | 2.4 mm | 6.4 | 7.4 | DISCONTINUED | --- | --- | ||
| 072674 | SGE GVF Ferrules - per pack of 10 | ||||||||
| GVF8(2)-008 | 1/8" (2 hole) | 2 x 0.8 mm | 6.4 | 7.4 | DISCONTINUED | --- | --- | ||
| 072666 | SGE GVF Ferrules - per pack of 10 | ||||||||
| GVF4-000 | 1/4" | no hole | 9.5 | 7.4 | 0*Standard lead-time for non-stock items is approximately two weeks depending on the item. | $63.30 | |||
| 0726660 | SGE GVF Ferrules - per pack of 10 | ||||||||
| GVF4-005 | 1/4" | 0.5 mm | 9.5 | 7.4 | DISCONTINUED | --- | --- | ||
| 072673 | SGE GVF Ferrules - per pack of 10 | ||||||||
| GVF4-16 | 1/4" | 1/16" | 9.5 | 7.4 | 0*Standard lead-time for non-stock items is approximately two weeks depending on the item. | $63.20 | |||
| 072668 | SGE GVF Ferrules - per pack of 10 | ||||||||
| GVF4-8 | 1/4" | 1/8" | 9.5 | 7.4 | DISCONTINUED | --- | --- | ||
| 072667 | SGE GVF Ferrules - per pack of 10 | ||||||||
| GVF4-4 | 1/4" | 1/4" | 9.5 | 7.4 | 0*Standard lead-time for non-stock items is approximately two weeks depending on the item. | $62.60 | |||
| 0726673 | SGE GVF Ferrules - per pack of 10 | ||||||||
| GVF4-60 | 1/4" | 6.0 mm | 9.5 | 7.4 | 0*Standard lead-time for non-stock items is approximately two weeks depending on the item. | $60.28 | |||
| 072694 | SGE GVF Ferrules - per pack of 10 | ||||||||
| MGVF-000 | For SGE MVSU mini-union | no hole | DISCONTINUED | --- | --- | ||||
| 072695 | SGE GVF Ferrules - per pack of 10 | ||||||||
| MGVF-003 | For SGE MVSU mini-union | 0.3 mm | DISCONTINUED | --- | --- | ||||
| 072696 | SGE GVF Ferrules - per pack of 10 | ||||||||
| MGVF-004 | For SGE MVSU mini-union | 0.4 mm | 1 | $59.40 | |||||
| 072697 | SGE GVF Ferrules - per pack of 10 | ||||||||
| MGVF-005 | For SGE MVSU mini-union | 0.5 mm | DISCONTINUED | --- | --- | ||||
| 072698 | SGE GVF Ferrules - per pack of 10 | ||||||||
| MGVF-008 | For SGE MVSU mini-union | 0.8 mm | DISCONTINUED | --- | --- | ||||
| 072693 | SGE GVF Ferrules - per pack of 10 | ||||||||
| MGVF-16 | For SGE MVSU mini-union | 1/16" | DISCONTINUED | --- | --- | ||||
| Graphitized Vespel® Sealing Rings (SGE Fitting Only) | |||||||||
| 0726520 | SGE VSR Sealing Ring - per pack of 10 | ||||||||
| GSR16-16 | 1/16" | 1/16" | DISCONTINUED | --- | --- | ||||
| 072653 | SGE VSR Sealing Ring - per pack of 10 | ||||||||
| VSR16-16 | 1/16" | 1/16" | 0*Standard lead-time for non-stock items is approximately two weeks depending on the item. | $42.90 | |||||
| 072652 | SGE VSR Sealing Ring - per pack of 10 | ||||||||
| VSR8-8 | 1/8" | 1/8" | DISCONTINUED | --- | --- | ||||
| 072651 | SGE VSR Sealing Ring - per pack of 10 | ||||||||
| VSR4-4 | 1/4" | 1/4" | DISCONTINUED | --- | --- | ||||
| 0726003 | SGE VSR Sealing Ring - per pack of 10 | ||||||||
| GSR 4-4 | 1/4" | 1/4" | DISCONTINUED | --- | --- | ||||
| Unit of measure for ordering is PK. | |||||||||
|
* Standard lead-time for non-stock items is approximately two weeks depending on the item. † Call for availability. | |||||||||
Ordering information.
International (non-US) prices available through your
local dealer.
|
|||||||||
SGE Ferrules for GC standard graphite ferrules (for GC applications)
Stainless Steel Metal Frit Spargers for the Purge & Trap System The stainless steel metal frit spargers have been designed for
use with the S.I.S. purge and trap system.
SGE Fused Silica Capillary Tubing (Deactivated)
Essential Ingredient in Maintaining a High Performance Chromatographic System
Agilent (Hewlett Packard) MSD Brass Nut Available in packages of 5 nuts.