SIS AP1000 AutoProbe™ Specifications and Requirements

Automated Direct Insertion Probe for Finnigan TRACE MS™ Mass Spectrometer from Thermo Electron Corp.

Figure 1 - AutoProbe™ System Attached to the Thermo Finnigan TRACE™ MS from Thermo Finnigan

AutoProbe™ System Components

The AutoProbe™ System as shipped consists of the following components. A quantity of one of each of the following is included unless otherwise noted below.

AutoProbe Console with Adjustable Base

CTC PAL AutoSampler

SIS AutoProbe System Software Module CD

Edwards Vacuum Pump

MS-Probe Interface Tube

AutoProbe Accessories

DEP Filament (2 included)

Source Position Calibration Tip (1 included)

Probe Seals (1 spare set included)

Isolation Valve Seal Set (1 spare set included)

2 Sample Trays and 1 Pump Tray

Compressed Air Gas Line - 1/8" O.D. x 20 feet flexible nylon air line

AutoProbe Cables

Serial Cable - PC to AutoProbe

Serial Cable - PC to CTC PAL Autosampler

Remote Start Cable - AutoProbe to MS

AutoProbe IO Cable - AutoProbe to CTC PAL AutoSampler

CTC Low Voltage Power Cord

Main Power Cord for AutoProbe

Accessory Tools

Allen Wrenches

Probe Seal Removal Tool

Manuals

SIS AutoProbe Manual

CTC PAL Autosampler Manual

Optional Accessories - (must be purchased separately)

PC Serial Port

Recommended Spare Parts (must be purchased separately)

DEP Probe Filaments
Probe Seals
Isolation Valve Seal Set

---

AutoProbe System Specifications

Voltages

• AutoProbe Console Voltage: 110 VAC

• Edward Vacuum Pump: 110 VAC

Fuses

• Main fuse:  10 amp slow blow

Compressed Air

• Minimum Pressure:  60 psi

• Maximum Pressure:  100 psi

Mass Spectrometer System Requirements

• Finnigan TRACE™ MS System from Thermo Electron Corp.

• Finnigan Xcalibur™ Version 1.1 or above software (tested up to 1.4)

• Finnigan TRACE MS™ EI/CI Source for the Manual Probe

Dimensions

• Console Size: 21" wide x 39" Deep x 11" High (PAL Autosampler not included)

• Console with CTC PAL Autosampler: 21" wide x 39" Deep x 33" High

Base Dimensions: 37" x 17" x 36" high 

• Height is adjustable from 41 to 53" high (distance to center of probe)

Weight

• Console Weight: 150 pounds

• Base Weight: 70 pounds

• Total Shipping Weight: 500 pounds

---

For additional details click onto the detailed descriptive material on the AutoDesorb system below.  The application notes below demonstrate the operation of the AutoProbe for the analysis of samples.  For additional pricing and ordering information, contact John Manura at Scientific Instrument Services, or call (908) 788-5550 ext: 800.  

---

AutoProbe Details

AutoProbe General Description

AutoProbe Console Description

AutoProbe Software Description

AutoProbe Specifications and Requirements

Articles and Application Notes

87.  Design and Development of an Automated Direct Probe for a Mass Spectrometer

89.  Quantitation of Organics via a Mass Spectrometer Automated Direct Probe

90.  An Automated MS Direct Probe for use in an Open Access Environment

91.  AutoProbe DEP Probe Tip Temperatures

back to top

Send comments on this page

Contacting our Customer Service Department--comments, questions, or anything can't find?

Call, e-mail, FAX, or type your comments below:

Contact details (optional, but required for us to reply or quote):

Name:		Organization/Country:
Email:		Phone/fax:

Regular business hours - 8:00 AM to 5:30 PM EST, M-F. E-mail replies normally expected within one business day.

PHONE: (908)788-5550;   FAX: (908)806-6631;   E-MAIL:

WEB: www.sisweb.com
ADDRESS: Scientific Instrument Services, 1027 Old York Rd., Ringoes, NJ 08551-1054.

© 1996-2010 Scientific Instrument Services, Inc. [ Terms | Trademarks | Privacy ]