Temp/Humidity Recorder

Available in 5g, 50g, or 100g models, Telatemp's programmable UltraSHOCK+ Data Recorder is a battery-powered, stand-alone data logger that measures and records up to 174,762 date and time stamped measurements per channel. The UltraSHOCK+ measures and records temperature, pressure, and humidity at the selected reading rates, while shock in 3 axes is recorded as the peak acceleration level over the same interval. This "time bin" feature ensures that shock data is recorded at the maximum value. The storage medium is non-volatile solid state memory, providing maximum data security even if the battery becomes discharged.

The UltraSHOCK+ Recorder is designed to operate within moving environments such as vehicles, trains and ships. The device is also useful in characterizing environments such as production and assembly lines of delicate electronics, IC fabrication, communications and computer components, as well as active, vibration-sensitive pharmaceuticals. The UltraSHOCK+ is supplied with three internal accelerometers oriented for measurement of three perpendicular axes. The unit can be mounted in any orientation.

Powered by a replaceable 9V lithium or alkaline battery. Typical battery life is up to 7 days.

With the Telatemp Micro Series Software*, starting, stopping and downloading from the UltraSHOCK+ Recorder is simple and easy. Data can also be viewed in graphical, tabular, and summary form, displayed in date and time stamped gravities (g and mg), temperature (°C, °F, K, °R), humidity (%RH, mg/ml water vapor concentration), pressure (PSIA, inHg, mmHg, bar, atm, Torr, Pa, kPa, MPa) and saved to your PC as an electronic file. The data can also be exported to Excel for further calculations.

Complete user manual can be printed out from the software.

*MLSP-USB Software & USB Interface is required.

Features:

Built-in accelerometers
All inclusive design
Compact
Programmable start time
High speed download
Real-time operation
Reusable
User-friendly
CE compliant

Applications:

Complete environmental
shipment monitoring
Shipping live cargo
Aircraft turbulence measurement
Endurance testing
Assembly line monitoring
Brake testing
Laboratory drop testing
Machinery monitoring
Railcar coupling impacts

To Order

UltraSHOCK+ Data Recorder(specify5g, 50g, or 100gmodels)
MLSP-USB Software & USB Interface

ULTRASHOCK+ Recorder Specifications:

TEMPERATURE    
Sensor:      Semiconductor   
Range:       -20 to +60ºC   
Resolution:  0.1ºC     
Accuracy:    ±0.5ºC (0 to +50ºC)   
HUMIDITY       
Sensor:      Capacitive Polymer   
Range:       0 to 95%RH   
Resolution:  0.1%RH     
Accuracy:    ±3%RH (±2%RH typical at 25ºC) 
Specified Accuracy Range:   +10 to +40°C; 10 to 80%RH 
PRESSURE       
Sensor:      Semiconductor Strain Gage 
Range:       0 to 30PSIA   
Resolution:  0.002PSIA     
Calibrated Accuracy:   ±1.0%FSR at 25ºC; ±0.2% typical 
SHOCK       
Accelerometer Type:      MEMS Semiconductor   
Acceleration Range (g):  ±5g  ±50g  ±100g 
Acceleration Resolution (g):  0.01g  0.05g  0.1g 
Calibrated Accuracy (g):  ±0.2g  ±1.0g  ±2.0g 
Sampling Rate:   1.953 millisecond ( 512Hz ) (note: data is sampled
  at this rate, only peak values are written at the end of a recording
  interval)
Accelerometer Freq.Resp:  0Hz to approx. 400Hz   
Reading Rate:   64Hz to 5 minutes for shock, selectable in software.
  Temperature, pressure & humidity sampled approx. every 2 seconds at
  intervals shorter than 2 seconds. Otherwise, sampled at the reading rate.
Memory:   174,762 readings per channel 
Start Modes:   Software programmable immediate start or delay start,
  up to 6 months in advance
Real Time Recording:   May be used with PC to monitor and record
  instantaneous measurements inreal time
Password Protection:   An optional password may be programmed into the
  device to restrict access to configuration options. Data may be read
  out with the password.
Calibration:      Digital calibration through software 
Calibration Date: Automatically recorded within device 
Battery Type:   Replaceable 9V lithium or alkaline battery included
Battery Life:   7 days typical with lithium battery, 1 min. reading rate @ 25°C
Data Format:    Date and time stamped gravities (g and mg), temperature
  (°C,°F, K,°R),humidity (%RH, mg/ml water vapor concentration), pressure (PSIA,
  inHg, mmHg, bar, atm, Torr, Pa, kPa, MPa)
Time Accuracy:        ±1 minute/month (at 2 to 30ºC) 
Computer Interface:   USB (interface cable required); 115,200 baud
Software:             XP SP3 / Vista / Windows 7 
Operating Environment:    -20 to +60ºC, 0 to 95%RH non-condensing
Dimensions:   3.5”x 4.4”x 1.0”(89mm x 111mm x 26mm
Weight:       12 oz (341 g)   
Enclosure:    Anodized aluminum   
Approvals:    CE

Part No.	Description	est wt.	Quantity In Stock	Price	Quantity to order
UOM=EA
SHOCK+5	5GM LOGGING ACCELEROMETER	0	0^(#)	$799.00	1
SHOCK+50	50GM LOGGING ACCELEROMETE	0	0^(#)	$799.00	1
SHOCK+100	100GM LOGGING ACCELERAMTE	0	0^(#)	$849.00	1
MLSPUSB	MLSP SOFTWARE SUPPORT PACKAGE INCLUDES USB INTERFACE CABLE; SOFTWARE AND OPERATION MANUAL	0	0^(#)	$130.00	1
(#) Standard lead-time for out-of-stock items is approximately two weeks.
Ordering information. International (non-US) prices available through your local dealer.

Name:		Organization/Country:
Email:		Phone/fax: