Dissolved Salt Meters

Measure the NaCl (sodium chloride), TDS (total dissolved solids) or conductivity in your water or wastewater. A dissolved salt meter will provide the critical readings vital to monitoring the quality of water in processes like deionization, reverse osmosis and distillation.

Waterproof SaltTestR Salinity Pocket Tester

Direct full-scale readout Ideal for spot checking NaCl-based samples. Display reads direct concentration-no manual corrections are necessary. Push button calibration provides easy and precise field calibration. Hold function freezes measurement for easy viewing and recording.

IP67- rated waterproof, dustproof housing
Tester floats if dropped in water
Factory calibrated against NaCl standards

Waterproof SaltTestR 11 Salinity Pocket Tester

Push-button calibration provides easy and precise field calibration. Hold function freezes measurement for viewing and recording.

Ideal for spot checking NaCl-based samples.
Replaceable sensor extends instrument life
IP67-rated waterproof housing
factory calibrated against NaCl standards

TDSTestr11 Dual-Range, Pocket Total Dissolved Solids Tester

Dual-range measurements increase application range
Replaceable sensor prolongs the life of your instrument
Single or one point per range calibration
Auto shutoff, low-battery indicator, error messages
Never watch a tester sink to the bottom of your tank or pond! These waterproof testers float, so there's no need to worry.
Valox® housing and stainless steel electrodes offer good chemical compatibility and durability.
All waterproof testers have replaceable sensors. Reuse the meter body many times without losing waterproof and dustproof protection.
What's Included: protective plastic storage case, lanyard, and batteries.

Waterproof Dual-Range, Pin-Style TDS Tester Specifications
Range	0 to 2000 ppm; 0 to 10.00 ppt
Resolution	10 ppm; 0.10 ppt
Accuracy	±1% full-scale (of range)
Calibration	Push button, one point per range
Dimensions	6 1/2"L x 1 1/2" diameter
Display	Dual line LCD with temperature
Battery Life	>150 hours
Temperature Range	32°F to 122°F (0°C to 50° C)/td>
Temperature Resolution	0.1
Temperature Accuracy	±0.9°F (±0.5°C)
Power	Four 1.5V batteries (included)
Temperature Compensation	Automatic

TDSTestr11 Multi-Range, Cup-Style Pocket Total Dissolved Solids Tester

Use these testers for either cup-style or dip-style measurements. For cup style, pour a small amount of your sample directly into the sensor cup until it overflows; for dip style, simply immerse tester tip into sample. Replaceable sensor lets you reuse meter body many times over. Valox® housing and stainless steel electrodes for good chemical compatibility. Before measuring, calibrate tester as either cup-style or dip-style (depending on use)

Operate as either a cup-style or dip-style tester for greater flexibility
Automatically or manually select measuring range
Waterproof, dustproof housings float
Push-button calibration, HOLD function, and error messages
What's Included: protective plastic storage case, lanyard, and batteries

Waterproof Multi-Range, Cup-Style, TDS Tester Specifications
Range	0 to 2000 ppm; 0 to 10.00 ppt
Resolution	1 ppm; 0.01 ppt
Accuracy	±1% full-scale (of range)
Calibration	Push button, one point per range
Dimensions	6 1/2"L x 1 1/2" diameter
Display	Dual line LCD with temperature
Battery Life	>150 hours
Temperature Range	32°F to 122°F (0°C to 50° C)/td>
Temperature Resolution	0.1
Temperature Accuracy	±0.9°F (±0.5°C)
Power	Four 1.5V batteries (included)
Temperature Compensation	Automatic

ACORN CON 6 Conductivity Meter W/ Probe

These microprocessor-based meters feature easy, push-button operation that offers high accuracy at an extremely affordable price. A quick and easy single-point calibration covers all five ranges; for greater precision, single-points can be calibrated within each of the five measurement ranges.

Additional features include a convenient HOLD function and auto-off function that shuts meter off after 20 minutes of nonuse. Programming functions allow customization of meter for temperature compensation, temperature coefficient, normalization, and cell constant.

Meters include: protective rubber boot with stand, fast-response conductivity/TDS/temperature probe (K = 1.0), and four AAA batteries.

Kits include: protective rubber boot with stand, fast-response conductivity/TDS/temperature probe (K = 1.0), conductivity calibration packets, sample bottles, rinse bottle, hard plastic carrying case, and four AAA batteries.

ACORN CON 11 Conductivity Meter W/ Conductivity Cell

The CON 11 and CON 110 meters feature dual-line LCD that allows viewing of conductivity or TDS and temperature simultaneously. Both models allow selection between manual and automatic temperature compensation (ATC) for correct values, even with changing solution temperatures. Normalization temperature and temperature coefficients are also customizable.

Selectable auto-ranging function selects the correct range for best resolution and fastest response. Calibrate the meters with a single or multi-point calibration for greater linearity. Calibration points can be automatically selected from programmed standard values or manually entered values specific for the application.

Selectable cell constants of 0.1, 1.0, or 10.0 and adjustable TDS conversion factors between 0.4 to 1.0 can be set for accurate and precise measurements in applications from pure water to solutions up to 200 mS. Use the built-in stands for benchtop operation or use battery power for handheld field operation. Meters operate up to 200 hours on a single set of batteries and have a selectable auto-off function that shuts down the meter after 20 minutes of nonuse. Select meter kits for storage and field operation.

Meters include: conductivity cell 35608-50 and batteries. CON 110 meter also includes Datalog Assist PC software on CD-ROM.

Meter kits include: conductivity cell 35608-50, calibration solution pouches (four each of 447 iS, 1413 iS, 2764 iS, and 15,000 iS), four rinse pouches, sample bottles, batteries, and hard side carrying case. CON 110 meter kit also includes Datalog Assist PC software on CD-ROM.

TESTR Battery A76 6/pk

A76 Coin Cell Battery 1.5V for pH TestR, TDSTestR and SaltTestR. Pack of 6 ea.

Part No.	Description	UOM	est wt.	Quantity In Stock	Price	Quantity to order
3566152	TELETEMP WATERPROOF SALT TEST	EA	0	0^(#)	$88.00	1
3566252	WATERPROOF SALTTESTR 11	EA	0	0^(#)	$101.00	1
3566210	TDS TESTR11 DUAL RANGE POCKET	EA	0	0^(#)	$83.00	1
3566215	TELATEMP TDS TESTR11 + MULTI-RANGE POCKET TDS TEST	EA	0	0^(#)	$112.00	1
3560740	CON 11 CONDUCTIVITY METER W/CONDUCTIVITY CELL	EA	0	0^(#)	$474.40	1
BATTA76	TESTR BATTERY A76 (LR44) PACK OF 6	PK	0	0^(#)	$15.25	1
(#) Standard lead-time for out-of-stock items is approximately two weeks.
Ordering information. International (non-US) prices available through your local dealer.

Name:		Organization/Country:
Email:		Phone/fax: